lkml.org 
[lkml]   [2013]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4:No Change] xHCI:Fixing xhci_readl definition and function call
On Thursday 12 September 2013 04:44 AM, Sarah Sharp wrote:
> Hi Kumar,
>
> I was waiting until after the 3.12 merge window to queue this patch, but
> Xenia noticed that the xhci_readl functions can completely go away and
> be replaced by standard readl/writel operations. She's posted a
> patchset to do that:
>
> http://marc.info/?l=linux-usb&m=137874983529708&w=2
>
> I hate to do this to you, but her patch is a better improvement, so I'll
> be taking that series instead of your patch. I hope you can still find
> other clean up work to do in the xHCI driver and USB core. :)
>
> Sarah Sharp
Sure sarah, Thanks
>
> On Wed, Sep 04, 2013 at 11:42:33AM +0530, Kumar Gaurav wrote:
>> On Tuesday 03 September 2013 09:34 PM, Sarah Sharp wrote:
>>> I'm confused. I said the last version of this patch didn't apply
>>> against usb-next, and you should rebase it. Why did you put "No Change"
>>> in the subject prefix?
>> I miss understood what Dan said. he said me to add no change if
>> there's no change from previous patch, but he didn't meant in
>> subject (my bad).
>>> On Sat, Aug 31, 2013 at 11:02:45PM +0530, Kumar Gaurav wrote:
>>>> This patch redefine function xhci_readl. xhci_readl function doesn't use xhci_hcd argument.
>>>> Hence there is no need of keeping it in the function arguments.
>>>>
>>>> Redefining this function breaks other functions which calls this function.
>>>> This phatch also correct those calls in xhci driver.
>>>>
>>>> Signed-off-by: Kumar Gaurav <kumargauravgupta3@gmail.com>
>>>> ---
>>> You didn't describe why you're resending this, or what changed. If you
>>> did rebase this against usb-next, you should have left the subject
>>> prefix as "PATCH v4" and said here:
>>>
>>> v4:
>>> - rebased against usb-next
>>>
>>> You can do this by generating the patch with `git format-patch`, edit
>>> the patch manually (in whatever directory it was created it), and then
>>> send it by passing the file to `git send-email`.
>>>
>>> Sarah Sharp
>> I rebased it against linux-next and i'll send the same patch as you
>> discribed but please do let me know if i need to mark that as "patch
>> v5"
>> as this patch won't have any change in changelog
>>>> drivers/usb/host/xhci-dbg.c | 36 ++++++++---------
>>>> drivers/usb/host/xhci-hub.c | 72 ++++++++++++++++-----------------
>>>> drivers/usb/host/xhci-mem.c | 20 ++++-----
>>>> drivers/usb/host/xhci-ring.c | 12 +++---
>>>> drivers/usb/host/xhci.c | 92 +++++++++++++++++++++---------------------
>>>> drivers/usb/host/xhci.h | 3 +-
>>>> 6 files changed, 117 insertions(+), 118 deletions(-)
>>>>
>>>> diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
>>>> index 73503a8..229e312 100644
>>>> --- a/drivers/usb/host/xhci-dbg.c
>>>> +++ b/drivers/usb/host/xhci-dbg.c
>>>> @@ -32,7 +32,7 @@ void xhci_dbg_regs(struct xhci_hcd *xhci)
>>>> xhci_dbg(xhci, "// xHCI capability registers at %p:\n",
>>>> xhci->cap_regs);
>>>> - temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
>>>> + temp = xhci_readl(&xhci->cap_regs->hc_capbase);
>>>> xhci_dbg(xhci, "// @%p = 0x%x (CAPLENGTH AND HCIVERSION)\n",
>>>> &xhci->cap_regs->hc_capbase, temp);
>>>> xhci_dbg(xhci, "// CAPLENGTH: 0x%x\n",
>>>> @@ -44,13 +44,13 @@ void xhci_dbg_regs(struct xhci_hcd *xhci)
>>>> xhci_dbg(xhci, "// xHCI operational registers at %p:\n", xhci->op_regs);
>>>> - temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
>>>> + temp = xhci_readl(&xhci->cap_regs->run_regs_off);
>>>> xhci_dbg(xhci, "// @%p = 0x%x RTSOFF\n",
>>>> &xhci->cap_regs->run_regs_off,
>>>> (unsigned int) temp & RTSOFF_MASK);
>>>> xhci_dbg(xhci, "// xHCI runtime registers at %p:\n", xhci->run_regs);
>>>> - temp = xhci_readl(xhci, &xhci->cap_regs->db_off);
>>>> + temp = xhci_readl(&xhci->cap_regs->db_off);
>>>> xhci_dbg(xhci, "// @%p = 0x%x DBOFF\n", &xhci->cap_regs->db_off, temp);
>>>> xhci_dbg(xhci, "// Doorbell array at %p:\n", xhci->dba);
>>>> }
>>>> @@ -61,7 +61,7 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci)
>>>> xhci_dbg(xhci, "xHCI capability registers at %p:\n", xhci->cap_regs);
>>>> - temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
>>>> + temp = xhci_readl(&xhci->cap_regs->hc_capbase);
>>>> xhci_dbg(xhci, "CAPLENGTH AND HCIVERSION 0x%x:\n",
>>>> (unsigned int) temp);
>>>> xhci_dbg(xhci, "CAPLENGTH: 0x%x\n",
>>>> @@ -69,7 +69,7 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci)
>>>> xhci_dbg(xhci, "HCIVERSION: 0x%x\n",
>>>> (unsigned int) HC_VERSION(temp));
>>>> - temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
>>>> + temp = xhci_readl(&xhci->cap_regs->hcs_params1);
>>>> xhci_dbg(xhci, "HCSPARAMS 1: 0x%x\n",
>>>> (unsigned int) temp);
>>>> xhci_dbg(xhci, " Max device slots: %u\n",
>>>> @@ -79,7 +79,7 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci)
>>>> xhci_dbg(xhci, " Max ports: %u\n",
>>>> (unsigned int) HCS_MAX_PORTS(temp));
>>>> - temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
>>>> + temp = xhci_readl(&xhci->cap_regs->hcs_params2);
>>>> xhci_dbg(xhci, "HCSPARAMS 2: 0x%x\n",
>>>> (unsigned int) temp);
>>>> xhci_dbg(xhci, " Isoc scheduling threshold: %u\n",
>>>> @@ -87,7 +87,7 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci)
>>>> xhci_dbg(xhci, " Maximum allowed segments in event ring: %u\n",
>>>> (unsigned int) HCS_ERST_MAX(temp));
>>>> - temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
>>>> + temp = xhci_readl(&xhci->cap_regs->hcs_params3);
>>>> xhci_dbg(xhci, "HCSPARAMS 3 0x%x:\n",
>>>> (unsigned int) temp);
>>>> xhci_dbg(xhci, " Worst case U1 device exit latency: %u\n",
>>>> @@ -95,14 +95,14 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci)
>>>> xhci_dbg(xhci, " Worst case U2 device exit latency: %u\n",
>>>> (unsigned int) HCS_U2_LATENCY(temp));
>>>> - temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
>>>> + temp = xhci_readl(&xhci->cap_regs->hcc_params);
>>>> xhci_dbg(xhci, "HCC PARAMS 0x%x:\n", (unsigned int) temp);
>>>> xhci_dbg(xhci, " HC generates %s bit addresses\n",
>>>> HCC_64BIT_ADDR(temp) ? "64" : "32");
>>>> /* FIXME */
>>>> xhci_dbg(xhci, " FIXME: more HCCPARAMS debugging\n");
>>>> - temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
>>>> + temp = xhci_readl(&xhci->cap_regs->run_regs_off);
>>>> xhci_dbg(xhci, "RTSOFF 0x%x:\n", temp & RTSOFF_MASK);
>>>> }
>>>> @@ -110,7 +110,7 @@ static void xhci_print_command_reg(struct xhci_hcd *xhci)
>>>> {
>>>> u32 temp;
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + temp = xhci_readl(&xhci->op_regs->command);
>>>> xhci_dbg(xhci, "USBCMD 0x%x:\n", temp);
>>>> xhci_dbg(xhci, " HC is %s\n",
>>>> (temp & CMD_RUN) ? "running" : "being stopped");
>>>> @@ -128,7 +128,7 @@ static void xhci_print_status(struct xhci_hcd *xhci)
>>>> {
>>>> u32 temp;
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->status);
>>>> + temp = xhci_readl(&xhci->op_regs->status);
>>>> xhci_dbg(xhci, "USBSTS 0x%x:\n", temp);
>>>> xhci_dbg(xhci, " Event ring is %sempty\n",
>>>> (temp & STS_EINT) ? "not " : "");
>>>> @@ -163,7 +163,7 @@ static void xhci_print_ports(struct xhci_hcd *xhci)
>>>> for (j = 0; j < NUM_PORT_REGS; ++j) {
>>>> xhci_dbg(xhci, "%p port %s reg = 0x%x\n",
>>>> addr, names[j],
>>>> - (unsigned int) xhci_readl(xhci, addr));
>>>> + (unsigned int) xhci_readl(addr));
>>>> addr++;
>>>> }
>>>> }
>>>> @@ -177,7 +177,7 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num)
>>>> u64 temp_64;
>>>> addr = &ir_set->irq_pending;
>>>> - temp = xhci_readl(xhci, addr);
>>>> + temp = xhci_readl(addr);
>>>> if (temp == XHCI_INIT_VALUE)
>>>> return;
>>>> @@ -187,17 +187,17 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num)
>>>> (unsigned int)temp);
>>>> addr = &ir_set->irq_control;
>>>> - temp = xhci_readl(xhci, addr);
>>>> + temp = xhci_readl(addr);
>>>> xhci_dbg(xhci, " %p: ir_set.control = 0x%x\n", addr,
>>>> (unsigned int)temp);
>>>> addr = &ir_set->erst_size;
>>>> - temp = xhci_readl(xhci, addr);
>>>> + temp = xhci_readl(addr);
>>>> xhci_dbg(xhci, " %p: ir_set.erst_size = 0x%x\n", addr,
>>>> (unsigned int)temp);
>>>> addr = &ir_set->rsvd;
>>>> - temp = xhci_readl(xhci, addr);
>>>> + temp = xhci_readl(addr);
>>>> if (temp != XHCI_INIT_VALUE)
>>>> xhci_dbg(xhci, " WARN: %p: ir_set.rsvd = 0x%x\n",
>>>> addr, (unsigned int)temp);
>>>> @@ -219,12 +219,12 @@ void xhci_print_run_regs(struct xhci_hcd *xhci)
>>>> int i;
>>>> xhci_dbg(xhci, "xHCI runtime registers at %p:\n", xhci->run_regs);
>>>> - temp = xhci_readl(xhci, &xhci->run_regs->microframe_index);
>>>> + temp = xhci_readl(&xhci->run_regs->microframe_index);
>>>> xhci_dbg(xhci, " %p: Microframe index = 0x%x\n",
>>>> &xhci->run_regs->microframe_index,
>>>> (unsigned int) temp);
>>>> for (i = 0; i < 7; ++i) {
>>>> - temp = xhci_readl(xhci, &xhci->run_regs->rsvd[i]);
>>>> + temp = xhci_readl(&xhci->run_regs->rsvd[i]);
>>>> if (temp != XHCI_INIT_VALUE)
>>>> xhci_dbg(xhci, " WARN: %p: Rsvd[%i] = 0x%x\n",
>>>> &xhci->run_regs->rsvd[i],
>>>> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
>>>> index fae697e..22758e7 100644
>>>> --- a/drivers/usb/host/xhci-hub.c
>>>> +++ b/drivers/usb/host/xhci-hub.c
>>>> @@ -94,7 +94,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
>>>> */
>>>> memset(port_removable, 0, sizeof(port_removable));
>>>> for (i = 0; i < ports; i++) {
>>>> - portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
>>>> + portsc = xhci_readl(xhci->usb2_ports[i]);
>>>> /* If a device is removable, PORTSC reports a 0, same as in the
>>>> * hub descriptor DeviceRemovable bits.
>>>> */
>>>> @@ -148,7 +148,7 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
>>>> port_removable = 0;
>>>> /* bit 0 is reserved, bit 1 is for port 1, etc. */
>>>> for (i = 0; i < ports; i++) {
>>>> - portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
>>>> + portsc = xhci_readl(xhci->usb3_ports[i]);
>>>> if (portsc & PORT_DEV_REMOVE)
>>>> port_removable |= 1 << (i + 1);
>>>> }
>>>> @@ -343,7 +343,7 @@ static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
>>>> /* Write 1 to disable the port */
>>>> xhci_writel(xhci, port_status | PORT_PE, addr);
>>>> - port_status = xhci_readl(xhci, addr);
>>>> + port_status = xhci_readl(addr);
>>>> xhci_dbg(xhci, "disable port, actual port %d status = 0x%x\n",
>>>> wIndex, port_status);
>>>> }
>>>> @@ -389,7 +389,7 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
>>>> }
>>>> /* Change bits are all write 1 to clear */
>>>> xhci_writel(xhci, port_status | status, addr);
>>>> - port_status = xhci_readl(xhci, addr);
>>>> + port_status = xhci_readl(addr);
>>>> xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n",
>>>> port_change_bit, wIndex, port_status);
>>>> }
>>>> @@ -415,7 +415,7 @@ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
>>>> {
>>>> u32 temp;
>>>> - temp = xhci_readl(xhci, port_array[port_id]);
>>>> + temp = xhci_readl(port_array[port_id]);
>>>> temp = xhci_port_state_to_neutral(temp);
>>>> temp &= ~PORT_PLS_MASK;
>>>> temp |= PORT_LINK_STROBE | link_state;
>>>> @@ -427,7 +427,7 @@ static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
>>>> {
>>>> u32 temp;
>>>> - temp = xhci_readl(xhci, port_array[port_id]);
>>>> + temp = xhci_readl(port_array[port_id]);
>>>> temp = xhci_port_state_to_neutral(temp);
>>>> if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
>>>> @@ -454,7 +454,7 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
>>>> {
>>>> u32 temp;
>>>> - temp = xhci_readl(xhci, port_array[port_id]);
>>>> + temp = xhci_readl(port_array[port_id]);
>>>> if (temp & port_bit) {
>>>> temp = xhci_port_state_to_neutral(temp);
>>>> temp |= port_bit;
>>>> @@ -707,12 +707,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> /* Set the U1 and U2 exit latencies. */
>>>> memcpy(buf, &usb_bos_descriptor,
>>>> USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
>>>> - temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
>>>> + temp = xhci_readl(&xhci->cap_regs->hcs_params3);
>>>> buf[12] = HCS_U1_LATENCY(temp);
>>>> put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
>>>> /* Indicate whether the host has LTM support. */
>>>> - temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
>>>> + temp = xhci_readl(&xhci->cap_regs->hcc_params);
>>>> if (HCC_LTC(temp))
>>>> buf[8] |= USB_LTM_SUPPORT;
>>>> @@ -722,7 +722,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> if (!wIndex || wIndex > max_ports)
>>>> goto error;
>>>> wIndex--;
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> if (temp == 0xffffffff) {
>>>> retval = -ENODEV;
>>>> break;
>>>> @@ -749,7 +749,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> if (!wIndex || wIndex > max_ports)
>>>> goto error;
>>>> wIndex--;
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> if (temp == 0xffffffff) {
>>>> retval = -ENODEV;
>>>> break;
>>>> @@ -758,7 +758,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> /* FIXME: What new port features do we need to support? */
>>>> switch (wValue) {
>>>> case USB_PORT_FEAT_SUSPEND:
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> if ((temp & PORT_PLS_MASK) != XDEV_U0) {
>>>> /* Resume the port to U0 first */
>>>> xhci_set_link_state(xhci, port_array, wIndex,
>>>> @@ -771,7 +771,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> * a port unless the port reports that it is in the
>>>> * enabled (PED = ‘1’,PLS < ‘3’) state.
>>>> */
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
>>>> || (temp & PORT_PLS_MASK) >= XDEV_U3) {
>>>> xhci_warn(xhci, "USB core suspending device "
>>>> @@ -796,11 +796,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> msleep(10); /* wait device to enter */
>>>> spin_lock_irqsave(&xhci->lock, flags);
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> bus_state->suspended_ports |= 1 << wIndex;
>>>> break;
>>>> case USB_PORT_FEAT_LINK_STATE:
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> /* Disable port */
>>>> if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
>>>> @@ -815,7 +815,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> PORT_CEC;
>>>> xhci_writel(xhci, temp | PORT_PE,
>>>> port_array[wIndex]);
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> break;
>>>> }
>>>> @@ -824,7 +824,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> xhci_dbg(xhci, "Enable port %d\n", wIndex);
>>>> xhci_set_link_state(xhci, port_array, wIndex,
>>>> link_state);
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> break;
>>>> }
>>>> @@ -858,7 +858,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> msleep(20); /* wait device to enter */
>>>> spin_lock_irqsave(&xhci->lock, flags);
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> if (link_state == USB_SS_PORT_LS_U3)
>>>> bus_state->suspended_ports |= 1 << wIndex;
>>>> break;
>>>> @@ -872,7 +872,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> xhci_writel(xhci, temp | PORT_POWER,
>>>> port_array[wIndex]);
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
>>>> spin_unlock_irqrestore(&xhci->lock, flags);
>>>> @@ -887,13 +887,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> temp = (temp | PORT_RESET);
>>>> xhci_writel(xhci, temp, port_array[wIndex]);
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
>>>> break;
>>>> case USB_PORT_FEAT_REMOTE_WAKE_MASK:
>>>> xhci_set_remote_wake_mask(xhci, port_array,
>>>> wIndex, wake_mask);
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> xhci_dbg(xhci, "set port remote wake mask, "
>>>> "actual port %d status = 0x%x\n",
>>>> wIndex, temp);
>>>> @@ -902,12 +902,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> temp |= PORT_WR;
>>>> xhci_writel(xhci, temp, port_array[wIndex]);
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> break;
>>>> case USB_PORT_FEAT_U1_TIMEOUT:
>>>> if (hcd->speed != HCD_USB3)
>>>> goto error;
>>>> - temp = xhci_readl(xhci, port_array[wIndex] + PORTPMSC);
>>>> + temp = xhci_readl(port_array[wIndex] + PORTPMSC);
>>>> temp &= ~PORT_U1_TIMEOUT_MASK;
>>>> temp |= PORT_U1_TIMEOUT(timeout);
>>>> xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC);
>>>> @@ -915,7 +915,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> case USB_PORT_FEAT_U2_TIMEOUT:
>>>> if (hcd->speed != HCD_USB3)
>>>> goto error;
>>>> - temp = xhci_readl(xhci, port_array[wIndex] + PORTPMSC);
>>>> + temp = xhci_readl(port_array[wIndex] + PORTPMSC);
>>>> temp &= ~PORT_U2_TIMEOUT_MASK;
>>>> temp |= PORT_U2_TIMEOUT(timeout);
>>>> xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC);
>>>> @@ -924,13 +924,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> goto error;
>>>> }
>>>> /* unblock any posted writes */
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> break;
>>>> case ClearPortFeature:
>>>> if (!wIndex || wIndex > max_ports)
>>>> goto error;
>>>> wIndex--;
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> if (temp == 0xffffffff) {
>>>> retval = -ENODEV;
>>>> break;
>>>> @@ -939,7 +939,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>> temp = xhci_port_state_to_neutral(temp);
>>>> switch (wValue) {
>>>> case USB_PORT_FEAT_SUSPEND:
>>>> - temp = xhci_readl(xhci, port_array[wIndex]);
>>>> + temp = xhci_readl(port_array[wIndex]);
>>>> xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
>>>> xhci_dbg(xhci, "PORTSC %04x\n", temp);
>>>> if (temp & PORT_RESET)
>>>> @@ -1044,7 +1044,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
>>>> spin_lock_irqsave(&xhci->lock, flags);
>>>> /* For each port, did anything change? If so, set that bit in buf. */
>>>> for (i = 0; i < max_ports; i++) {
>>>> - temp = xhci_readl(xhci, port_array[i]);
>>>> + temp = xhci_readl(port_array[i]);
>>>> if (temp == 0xffffffff) {
>>>> retval = -ENODEV;
>>>> break;
>>>> @@ -1098,7 +1098,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
>>>> u32 t1, t2;
>>>> int slot_id;
>>>> - t1 = xhci_readl(xhci, port_array[port_index]);
>>>> + t1 = xhci_readl(port_array[port_index]);
>>>> t2 = xhci_port_state_to_neutral(t1);
>>>> if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
>>>> @@ -1140,7 +1140,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
>>>> /* Get the port power control register address. */
>>>> addr = port_array[port_index] + PORTPMSC;
>>>> - tmp = xhci_readl(xhci, addr);
>>>> + tmp = xhci_readl(addr);
>>>> tmp |= PORT_RWE;
>>>> xhci_writel(xhci, tmp, addr);
>>>> }
>>>> @@ -1173,7 +1173,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
>>>> }
>>>> /* delay the irqs */
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + temp = xhci_readl(&xhci->op_regs->command);
>>>> temp &= ~CMD_EIE;
>>>> xhci_writel(xhci, temp, &xhci->op_regs->command);
>>>> @@ -1184,7 +1184,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
>>>> u32 temp;
>>>> int slot_id;
>>>> - temp = xhci_readl(xhci, port_array[port_index]);
>>>> + temp = xhci_readl(port_array[port_index]);
>>>> if (DEV_SUPERSPEED(temp))
>>>> temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
>>>> else
>>>> @@ -1232,20 +1232,20 @@ int xhci_bus_resume(struct usb_hcd *hcd)
>>>> * the port power control register address.
>>>> */
>>>> addr = port_array[port_index] + PORTPMSC;
>>>> - tmp = xhci_readl(xhci, addr);
>>>> + tmp = xhci_readl(addr);
>>>> tmp &= ~PORT_RWE;
>>>> xhci_writel(xhci, tmp, addr);
>>>> }
>>>> }
>>>> - (void) xhci_readl(xhci, &xhci->op_regs->command);
>>>> + (void) xhci_readl(&xhci->op_regs->command);
>>>> bus_state->next_statechange = jiffies + msecs_to_jiffies(5);
>>>> /* re-enable irqs */
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + temp = xhci_readl(&xhci->op_regs->command);
>>>> temp |= CMD_EIE;
>>>> xhci_writel(xhci, temp, &xhci->op_regs->command);
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + temp = xhci_readl(&xhci->op_regs->command);
>>>> spin_unlock_irqrestore(&xhci->lock, flags);
>>>> return 0;
>>>> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
>>>> index 53b972c..e7a974b 100644
>>>> --- a/drivers/usb/host/xhci-mem.c
>>>> +++ b/drivers/usb/host/xhci-mem.c
>>>> @@ -1995,7 +1995,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
>>>> }
>>>> /* Port offset and count in the third dword, see section 7.2 */
>>>> - temp = xhci_readl(xhci, addr + 2);
>>>> + temp = xhci_readl(addr + 2);
>>>> port_offset = XHCI_EXT_PORT_OFF(temp);
>>>> port_count = XHCI_EXT_PORT_COUNT(temp);
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> @@ -2078,7 +2078,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
>>>> int cap_count = 0;
>>>> addr = &xhci->cap_regs->hcc_params;
>>>> - offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
>>>> + offset = XHCI_HCC_EXT_CAPS(xhci_readl(addr));
>>>> if (offset == 0) {
>>>> xhci_err(xhci, "No Extended Capability registers, "
>>>> "unable to set up roothub.\n");
>>>> @@ -2115,7 +2115,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
>>>> /* count extended protocol capability entries for later caching */
>>>> do {
>>>> u32 cap_id;
>>>> - cap_id = xhci_readl(xhci, tmp_addr);
>>>> + cap_id = xhci_readl(tmp_addr);
>>>> if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
>>>> cap_count++;
>>>> tmp_offset = XHCI_EXT_CAPS_NEXT(cap_id);
>>>> @@ -2129,7 +2129,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
>>>> while (1) {
>>>> u32 cap_id;
>>>> - cap_id = xhci_readl(xhci, addr);
>>>> + cap_id = xhci_readl(addr);
>>>> if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
>>>> xhci_add_in_port(xhci, num_ports, addr,
>>>> (u8) XHCI_EXT_PORT_MAJOR(cap_id),
>>>> @@ -2234,7 +2234,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
>>>> INIT_LIST_HEAD(&xhci->lpm_failed_devs);
>>>> INIT_LIST_HEAD(&xhci->cancel_cmd_list);
>>>> - page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
>>>> + page_size = xhci_readl(&xhci->op_regs->page_size);
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> "Supported page size register = 0x%x", page_size);
>>>> for (i = 0; i < 16; i++) {
>>>> @@ -2257,10 +2257,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
>>>> * Program the Number of Device Slots Enabled field in the CONFIG
>>>> * register with the max value of slots the HC can handle.
>>>> */
>>>> - val = HCS_MAX_SLOTS(xhci_readl(xhci, &xhci->cap_regs->hcs_params1));
>>>> + val = HCS_MAX_SLOTS(xhci_readl(&xhci->cap_regs->hcs_params1));
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> "// xHC can handle at most %d device slots.", val);
>>>> - val2 = xhci_readl(xhci, &xhci->op_regs->config_reg);
>>>> + val2 = xhci_readl(&xhci->op_regs->config_reg);
>>>> val |= (val2 & ~HCS_SLOTS_MASK);
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> "// Setting Max device slots reg = 0x%x.", val);
>>>> @@ -2341,7 +2341,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
>>>> */
>>>> xhci->cmd_ring_reserved_trbs++;
>>>> - val = xhci_readl(xhci, &xhci->cap_regs->db_off);
>>>> + val = xhci_readl(&xhci->cap_regs->db_off);
>>>> val &= DBOFF_MASK;
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> "// Doorbell array is located at offset 0x%x"
>>>> @@ -2392,7 +2392,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
>>>> }
>>>> /* set ERST count with the number of entries in the segment table */
>>>> - val = xhci_readl(xhci, &xhci->ir_set->erst_size);
>>>> + val = xhci_readl(&xhci->ir_set->erst_size);
>>>> val &= ERST_SIZE_MASK;
>>>> val |= ERST_NUM_SEGS;
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> @@ -2439,7 +2439,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
>>>> * is necessary for allowing USB 3.0 devices to do remote wakeup from
>>>> * U3 (device suspend).
>>>> */
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->dev_notification);
>>>> + temp = xhci_readl(&xhci->op_regs->dev_notification);
>>>> temp &= ~DEV_NOTE_MASK;
>>>> temp |= DEV_NOTE_FWAKE;
>>>> xhci_writel(xhci, temp, &xhci->op_regs->dev_notification);
>>>> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
>>>> index 411da1f..32da035 100644
>>>> --- a/drivers/usb/host/xhci-ring.c
>>>> +++ b/drivers/usb/host/xhci-ring.c
>>>> @@ -287,7 +287,7 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci)
>>>> xhci_dbg(xhci, "// Ding dong!\n");
>>>> xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
>>>> /* Flush PCI posted writes */
>>>> - xhci_readl(xhci, &xhci->dba->doorbell[0]);
>>>> + xhci_readl(&xhci->dba->doorbell[0]);
>>>> }
>>>> static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
>>>> @@ -1675,7 +1675,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
>>>> faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci,
>>>> port_id);
>>>> - temp = xhci_readl(xhci, port_array[faked_port_index]);
>>>> + temp = xhci_readl(port_array[faked_port_index]);
>>>> if (hcd->state == HC_STATE_SUSPENDED) {
>>>> xhci_dbg(xhci, "resume root hub\n");
>>>> usb_hcd_resume_root_hub(hcd);
>>>> @@ -1684,7 +1684,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
>>>> if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
>>>> xhci_dbg(xhci, "port resume event for port %d\n", port_id);
>>>> - temp1 = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + temp1 = xhci_readl(&xhci->op_regs->command);
>>>> if (!(temp1 & CMD_RUN)) {
>>>> xhci_warn(xhci, "xHC is not running.\n");
>>>> goto cleanup;
>>>> @@ -2754,7 +2754,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
>>>> spin_lock(&xhci->lock);
>>>> /* Check if the xHC generated the interrupt, or the irq is shared */
>>>> - status = xhci_readl(xhci, &xhci->op_regs->status);
>>>> + status = xhci_readl(&xhci->op_regs->status);
>>>> if (status == 0xffffffff)
>>>> goto hw_died;
>>>> @@ -2783,7 +2783,7 @@ hw_died:
>>>> if (hcd->irq) {
>>>> u32 irq_pending;
>>>> /* Acknowledge the PCI interrupt */
>>>> - irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
>>>> + irq_pending = xhci_readl(&xhci->ir_set->irq_pending);
>>>> irq_pending |= IMAN_IP;
>>>> xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
>>>> }
>>>> @@ -3854,7 +3854,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
>>>> if (ret)
>>>> return ret;
>>>> - start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index);
>>>> + start_frame = xhci_readl(&xhci->run_regs->microframe_index);
>>>> start_frame &= 0x3fff;
>>>> urb->start_frame = start_frame;
>>>> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
>>>> index 49b6edb..8da2fd5 100644
>>>> --- a/drivers/usb/host/xhci.c
>>>> +++ b/drivers/usb/host/xhci.c
>>>> @@ -60,7 +60,7 @@ int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
>>>> u32 result;
>>>> do {
>>>> - result = xhci_readl(xhci, ptr);
>>>> + result = xhci_readl(ptr);
>>>> if (result == ~(u32)0) /* card removed */
>>>> return -ENODEV;
>>>> result &= mask;
>>>> @@ -82,11 +82,11 @@ void xhci_quiesce(struct xhci_hcd *xhci)
>>>> u32 mask;
>>>> mask = ~(XHCI_IRQS);
>>>> - halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT;
>>>> + halted = xhci_readl(&xhci->op_regs->status) & STS_HALT;
>>>> if (!halted)
>>>> mask &= ~CMD_RUN;
>>>> - cmd = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + cmd = xhci_readl(&xhci->op_regs->command);
>>>> cmd &= mask;
>>>> xhci_writel(xhci, cmd, &xhci->op_regs->command);
>>>> }
>>>> @@ -124,7 +124,7 @@ static int xhci_start(struct xhci_hcd *xhci)
>>>> u32 temp;
>>>> int ret;
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + temp = xhci_readl(&xhci->op_regs->command);
>>>> temp |= (CMD_RUN);
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Turn on HC, cmd = 0x%x.",
>>>> temp);
>>>> @@ -158,14 +158,14 @@ int xhci_reset(struct xhci_hcd *xhci)
>>>> u32 state;
>>>> int ret, i;
>>>> - state = xhci_readl(xhci, &xhci->op_regs->status);
>>>> + state = xhci_readl(&xhci->op_regs->status);
>>>> if ((state & STS_HALT) == 0) {
>>>> xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
>>>> return 0;
>>>> }
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Reset the HC");
>>>> - command = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + command = xhci_readl(&xhci->op_regs->command);
>>>> command |= CMD_RESET;
>>>> xhci_writel(xhci, command, &xhci->op_regs->command);
>>>> @@ -422,7 +422,7 @@ static void compliance_mode_recovery(unsigned long arg)
>>>> xhci = (struct xhci_hcd *)arg;
>>>> for (i = 0; i < xhci->num_usb3_ports; i++) {
>>>> - temp = xhci_readl(xhci, xhci->usb3_ports[i]);
>>>> + temp = xhci_readl(xhci->usb3_ports[i]);
>>>> if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
>>>> /*
>>>> * Compliance Mode Detected. Letting USB Core
>>>> @@ -611,19 +611,19 @@ int xhci_run(struct usb_hcd *hcd)
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> "// Set the interrupt modulation register");
>>>> - temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
>>>> + temp = xhci_readl(&xhci->ir_set->irq_control);
>>>> temp &= ~ER_IRQ_INTERVAL_MASK;
>>>> temp |= (u32) 160;
>>>> xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
>>>> /* Set the HCD state before we enable the irqs */
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + temp = xhci_readl(&xhci->op_regs->command);
>>>> temp |= (CMD_EIE);
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> "// Enable interrupts, cmd = 0x%x.", temp);
>>>> xhci_writel(xhci, temp, &xhci->op_regs->command);
>>>> - temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
>>>> + temp = xhci_readl(&xhci->ir_set->irq_pending);
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> "// Enabling event ring interrupter %p by writing 0x%x to irq_pending",
>>>> xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
>>>> @@ -698,9 +698,9 @@ void xhci_stop(struct usb_hcd *hcd)
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> "// Disabling event ring interrupts");
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->status);
>>>> + temp = xhci_readl(&xhci->op_regs->status);
>>>> xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
>>>> - temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
>>>> + temp = xhci_readl(&xhci->ir_set->irq_pending);
>>>> xhci_writel(xhci, ER_IRQ_DISABLE(temp),
>>>> &xhci->ir_set->irq_pending);
>>>> xhci_print_ir_set(xhci, 0);
>>>> @@ -709,7 +709,7 @@ void xhci_stop(struct usb_hcd *hcd)
>>>> xhci_mem_cleanup(xhci);
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> "xhci_stop completed - status = %x",
>>>> - xhci_readl(xhci, &xhci->op_regs->status));
>>>> + xhci_readl(&xhci->op_regs->status));
>>>> }
>>>> /*
>>>> @@ -736,21 +736,21 @@ void xhci_shutdown(struct usb_hcd *hcd)
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>>> "xhci_shutdown completed - status = %x",
>>>> - xhci_readl(xhci, &xhci->op_regs->status));
>>>> + xhci_readl(&xhci->op_regs->status));
>>>> }
>>>> #ifdef CONFIG_PM
>>>> static void xhci_save_registers(struct xhci_hcd *xhci)
>>>> {
>>>> - xhci->s3.command = xhci_readl(xhci, &xhci->op_regs->command);
>>>> - xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
>>>> + xhci->s3.command = xhci_readl(&xhci->op_regs->command);
>>>> + xhci->s3.dev_nt = xhci_readl(&xhci->op_regs->dev_notification);
>>>> xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
>>>> - xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
>>>> - xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
>>>> + xhci->s3.config_reg = xhci_readl(&xhci->op_regs->config_reg);
>>>> + xhci->s3.erst_size = xhci_readl(&xhci->ir_set->erst_size);
>>>> xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
>>>> xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
>>>> - xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
>>>> - xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
>>>> + xhci->s3.irq_pending = xhci_readl(&xhci->ir_set->irq_pending);
>>>> + xhci->s3.irq_control = xhci_readl(&xhci->ir_set->irq_control);
>>>> }
>>>> static void xhci_restore_registers(struct xhci_hcd *xhci)
>>>> @@ -858,7 +858,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
>>>> /* skipped assuming that port suspend has done */
>>>> /* step 2: clear Run/Stop bit */
>>>> - command = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + command = xhci_readl(&xhci->op_regs->command);
>>>> command &= ~CMD_RUN;
>>>> xhci_writel(xhci, command, &xhci->op_regs->command);
>>>> if (xhci_handshake(xhci, &xhci->op_regs->status,
>>>> @@ -873,7 +873,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
>>>> xhci_save_registers(xhci);
>>>> /* step 4: set CSS flag */
>>>> - command = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + command = xhci_readl(&xhci->op_regs->command);
>>>> command |= CMD_CSS;
>>>> xhci_writel(xhci, command, &xhci->op_regs->command);
>>>> if (xhci_handshake(xhci, &xhci->op_regs->status,
>>>> @@ -939,7 +939,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>>> xhci_set_cmd_ring_deq(xhci);
>>>> /* step 3: restore state and start state*/
>>>> /* step 3: set CRS flag */
>>>> - command = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + command = xhci_readl(&xhci->op_regs->command);
>>>> command |= CMD_CRS;
>>>> xhci_writel(xhci, command, &xhci->op_regs->command);
>>>> if (xhci_handshake(xhci, &xhci->op_regs->status,
>>>> @@ -948,7 +948,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>>> spin_unlock_irq(&xhci->lock);
>>>> return -ETIMEDOUT;
>>>> }
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->status);
>>>> + temp = xhci_readl(&xhci->op_regs->status);
>>>> }
>>>> /* If restore operation fails, re-initialize the HC during resume */
>>>> @@ -972,9 +972,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>>> xhci_cleanup_msix(xhci);
>>>> xhci_dbg(xhci, "// Disabling event ring interrupts\n");
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->status);
>>>> + temp = xhci_readl(&xhci->op_regs->status);
>>>> xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
>>>> - temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
>>>> + temp = xhci_readl(&xhci->ir_set->irq_pending);
>>>> xhci_writel(xhci, ER_IRQ_DISABLE(temp),
>>>> &xhci->ir_set->irq_pending);
>>>> xhci_print_ir_set(xhci, 0);
>>>> @@ -982,7 +982,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>>> xhci_dbg(xhci, "cleaning up memory\n");
>>>> xhci_mem_cleanup(xhci);
>>>> xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
>>>> - xhci_readl(xhci, &xhci->op_regs->status));
>>>> + xhci_readl(&xhci->op_regs->status));
>>>> /* USB core calls the PCI reinit and start functions twice:
>>>> * first with the primary HCD, and then with the secondary HCD.
>>>> @@ -1011,7 +1011,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>>> }
>>>> /* step 4: set Run/Stop bit */
>>>> - command = xhci_readl(xhci, &xhci->op_regs->command);
>>>> + command = xhci_readl(&xhci->op_regs->command);
>>>> command |= CMD_RUN;
>>>> xhci_writel(xhci, command, &xhci->op_regs->command);
>>>> xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT,
>>>> @@ -1452,7 +1452,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
>>>> ret = usb_hcd_check_unlink_urb(hcd, urb, status);
>>>> if (ret || !urb->hcpriv)
>>>> goto done;
>>>> - temp = xhci_readl(xhci, &xhci->op_regs->status);
>>>> + temp = xhci_readl(&xhci->op_regs->status);
>>>> if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) {
>>>> xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
>>>> "HW died, freeing TD.");
>>>> @@ -3593,7 +3593,7 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
>>>> spin_lock_irqsave(&xhci->lock, flags);
>>>> /* Don't disable the slot if the host controller is dead. */
>>>> - state = xhci_readl(xhci, &xhci->op_regs->status);
>>>> + state = xhci_readl(&xhci->op_regs->status);
>>>> if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) ||
>>>> (xhci->xhc_state & XHCI_STATE_HALTED)) {
>>>> xhci_free_virt_device(xhci, udev->slot_id);
>>>> @@ -4102,12 +4102,12 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
>>>> PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
>>>> if (ret != -ETIMEDOUT) {
>>>> /* enter L1 successfully */
>>>> - temp = xhci_readl(xhci, addr);
>>>> + temp = xhci_readl(addr);
>>>> xhci_dbg(xhci, "port %d entered L1 state, port status 0x%x\n",
>>>> port_num, temp);
>>>> ret = 0;
>>>> } else {
>>>> - temp = xhci_readl(xhci, pm_addr);
>>>> + temp = xhci_readl(pm_addr);
>>>> xhci_dbg(xhci, "port %d software lpm failed, L1 status %d\n",
>>>> port_num, temp & PORT_L1S_MASK);
>>>> ret = -EINVAL;
>>>> @@ -4125,7 +4125,7 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
>>>> /* Check PORTSC to make sure the device is in the right state */
>>>> if (!ret) {
>>>> - temp = xhci_readl(xhci, addr);
>>>> + temp = xhci_readl(addr);
>>>> xhci_dbg(xhci, "resumed port %d status 0x%x\n", port_num, temp);
>>>> if (!(temp & PORT_CONNECT) || !(temp & PORT_PE) ||
>>>> (temp & PORT_PLS_MASK) != XDEV_U0) {
>>>> @@ -4183,7 +4183,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
>>>> port_array = xhci->usb2_ports;
>>>> port_num = udev->portnum - 1;
>>>> pm_addr = port_array[port_num] + PORTPMSC;
>>>> - pm_val = xhci_readl(xhci, pm_addr);
>>>> + pm_val = xhci_readl(pm_addr);
>>>> hlpm_addr = port_array[port_num] + PORTHLPMC;
>>>> field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
>>>> @@ -4225,7 +4225,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
>>>> hlpm_val = xhci_calculate_usb2_hw_lpm_params(udev);
>>>> xhci_writel(xhci, hlpm_val, hlpm_addr);
>>>> /* flush write */
>>>> - xhci_readl(xhci, hlpm_addr);
>>>> + xhci_readl(hlpm_addr);
>>>> } else {
>>>> hird = xhci_calculate_hird_besl(xhci, udev);
>>>> }
>>>> @@ -4233,16 +4233,16 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
>>>> pm_val &= ~PORT_HIRD_MASK;
>>>> pm_val |= PORT_HIRD(hird) | PORT_RWE;
>>>> xhci_writel(xhci, pm_val, pm_addr);
>>>> - pm_val = xhci_readl(xhci, pm_addr);
>>>> + pm_val = xhci_readl(pm_addr);
>>>> pm_val |= PORT_HLE;
>>>> xhci_writel(xhci, pm_val, pm_addr);
>>>> /* flush write */
>>>> - xhci_readl(xhci, pm_addr);
>>>> + xhci_readl(pm_addr);
>>>> } else {
>>>> pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK);
>>>> xhci_writel(xhci, pm_val, pm_addr);
>>>> /* flush write */
>>>> - xhci_readl(xhci, pm_addr);
>>>> + xhci_readl(pm_addr);
>>>> if (udev->usb2_hw_lpm_besl_capable) {
>>>> spin_unlock_irqrestore(&xhci->lock, flags);
>>>> mutex_lock(hcd->bandwidth_mutex);
>>>> @@ -4843,7 +4843,7 @@ int xhci_get_frame(struct usb_hcd *hcd)
>>>> {
>>>> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>>>> /* EHCI mods by the periodic size. Why? */
>>>> - return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3;
>>>> + return xhci_readl(&xhci->run_regs->microframe_index) >> 3;
>>>> }
>>>> int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
>>>> @@ -4887,16 +4887,16 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
>>>> xhci->cap_regs = hcd->regs;
>>>> xhci->op_regs = hcd->regs +
>>>> - HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
>>>> + HC_LENGTH(xhci_readl(&xhci->cap_regs->hc_capbase));
>>>> xhci->run_regs = hcd->regs +
>>>> - (xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
>>>> + (xhci_readl(&xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
>>>> /* Cache read-only capability registers */
>>>> - xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
>>>> - xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
>>>> - xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
>>>> - xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
>>>> + xhci->hcs_params1 = xhci_readl(&xhci->cap_regs->hcs_params1);
>>>> + xhci->hcs_params2 = xhci_readl(&xhci->cap_regs->hcs_params2);
>>>> + xhci->hcs_params3 = xhci_readl(&xhci->cap_regs->hcs_params3);
>>>> + xhci->hcc_params = xhci_readl(&xhci->cap_regs->hc_capbase);
>>>> xhci->hci_version = HC_VERSION(xhci->hcc_params);
>>>> - xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
>>>> + xhci->hcc_params = xhci_readl(&xhci->cap_regs->hcc_params);
>>>> xhci_print_registers(xhci);
>>>> get_quirks(dev, xhci);
>>>> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
>>>> index 46aa148..3acb044 100644
>>>> --- a/drivers/usb/host/xhci.h
>>>> +++ b/drivers/usb/host/xhci.h
>>>> @@ -1586,8 +1586,7 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
>>>> /* TODO: copied from ehci.h - can be refactored? */
>>>> /* xHCI spec says all registers are little endian */
>>>> -static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
>>>> - __le32 __iomem *regs)
>>>> +static inline unsigned int xhci_readl(__le32 __iomem *regs)
>>>> {
>>>> return readl(regs);
>>>> }
>>>> --
>>>> 1.7.9.5
>>>>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-09-12 05:01    [W:0.590 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site