lkml.org 
[lkml]   [2013]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 3/5] Intel MIC Host Driver Changes for Virtio Devices.
Date
Sudeep Dutt <sudeep.dutt@intel.com> writes:
> On Mon, 2013-07-29 at 10:05 +0300, Michael S. Tsirkin wrote:
>> On Wed, Jul 24, 2013 at 08:31:34PM -0700, Sudeep Dutt wrote:
>> > From: Ashutosh Dixit <ashutosh.dixit@intel.com>
>> >
>> > This patch introduces the host "Virtio over PCIe" interface for
>> > Intel MIC. It allows creating user space backends on the host and
>> > instantiating virtio devices for them on the Intel MIC card. A character
>> > device per MIC is exposed with IOCTL, mmap and poll callbacks. This allows
>> > the user space backend to:
>> > (a) add/remove a virtio device via a device page.
>> > (b) map (R/O) virtio rings and device page to user space.
>> > (c) poll for availability of data.
>> > (d) copy a descriptor or entire descriptor chain to/from the card.
>> > (e) modify virtio configuration.
>> > (f) handle virtio device reset.
>> > The buffers are copied over using CPU copies for this initial patch
>> > and host initiated MIC DMA support is planned for future patches.
>> > The avail and desc virtio rings are in host memory and the used ring
>> > is in card memory to maximize writes across PCIe for performance.
>> >
>> > Co-author: Sudeep Dutt <sudeep.dutt@intel.com>
>> > Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
>> > Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com>
>> > Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
>> > Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
>> > Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
>> > Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
>> > Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
>> > Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
>>
>> I decided to look at the security and ordering of ring accesses.
>> Doing a quick look, I think I found some issues, see comments below.
>> If it were possible to reuse existing ring handling code,
>> such issues would go away automatically.
>> Which brings me to the next question: have you looked at reusing
>> some code under drivers/vhost for host side processing?
>> If not, you probably should.
>> Is code in vringh.c generic enough to support your use-case,
>> and if not what exactly are the issues preventing this?
>>
>> Thanks,
>>
> We had implemented our custom MIC vring host access logic before the
> VRINGH infrastructure was merged to mainline in v3.10. Based on your
> feedback, we have a proof of concept implemented this week, by reusing
> the VRINGH infrastructure and it works nicely for us!

Nice! Good suggestion MST, thanks for the plug :)

> One of our goals is to issue the buffer transfers using DMA with future
> patches. The CPU copy in our current patches is also slightly different
> compared to VRINGH since we are copying from card buffers to user space
> and vice versa. In order to do meet these goals, we are obtaining the
> next available descriptor via vringh_getdesc_kern(..), then triggering
> the copy (CPU or eventually DMA) via a custom MIC API and then
> publishing the descriptor via vringh_complete_kern(..). Are there any
> plans of enhancing VRINGH to allow overriding the xfer mechanism in
> vringh_iov_xfer(..)? This will allow drivers with custom xfer routines
> to reuse APIs like vringh_iov_push_kern(..) and vringh_iov_pull_kern(..)
> as well. That said, the existing VRINGH infrastructure is generic enough
> for our use case as is today.

We'll have to look at exposing the internals. vringh_iov_xfer() works
well because it's internal and inlined. It'll be much easier to
evaluate when we're dealing with specific patches.

Cheers,
Rusty.


\
 
 \ /
  Last update: 2013-08-06 06:21    [W:0.051 / U:1.388 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site