Messages in this thread | | | Date | Fri, 30 Aug 2013 09:58:10 +1200 | From | Chris Rodley <> | Subject | Re: sht15 kernel driver |
| |
On 30/08/13 03:02, Jerome Oufella wrote: > Chris Rodley <chris@snapithd.com> writes: >> Thanks Jerome! >> >> That was just what I needed to know. >> The device is now set up and is working well - I will have a go at >> back porting now. >> >> Many thanks again for your help! >> Chris > Good to know Chris! > > Note, we noticed that the sht15 driver may be sensible to noisy lines, > we suspect a race condition around the interrupt handling code. > > If your sensor is populated on the board you shouldn't have problems > though. > > Jerome
Hi,
We have it working really well .. not noticing any issues - so far at least. It is being populated more or less directly on the board - just via a daughter board in the prototype phase. So I might not see the same issues.
If we find anything I will submit it back to you.
Many thanks again for your advice! Chris
| |