lkml.org 
[lkml]   [2013]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] pinctrl: at91: add support for OUTPUT config
On 28/08/2013 09:43, Nicolas Ferre :
> On 28/08/2013 09:35, boris brezillon :
>> On 28/08/2013 09:31, Nicolas Ferre wrote:
>>> On 27/08/2013 16:51, Boris BREZILLON :
>>>> Add support for pin output control through the pinctrl config:
>>>> - support enabling/disabling output on a given pin
>>>> - support output level setting (high or low)
>>>>
>>>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>>>> ---
>>>> .../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 ++
>>>> drivers/pinctrl/pinctrl-at91.c | 22
>>>> ++++++++++++++++++++
>>>> include/dt-bindings/pinctrl/at91.h | 2 ++
>>>> 3 files changed, 26 insertions(+)
>>>>
>>>> diff --git
>>>> a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>>>> b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>>>> index cf7c7bc..5a22e0d 100644
>>>> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>>>> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>>>> @@ -90,6 +90,8 @@ MULTIDRIVE (1 << 1): indicate this pin need to
>>>> be configured as multidrive.
>>>> DEGLITCH (1 << 2): indicate this pin need deglitch.
>>>> PULL_DOWN (1 << 3): indicate this pin need a pull down.
>>>> DIS_SCHMIT (1 << 4): indicate this pin need to disable schmit
>>>> trigger.
>>>> +OUTPUT (1 << 5): indicate this pin need to be configured as
>>>> an output.
>>>> +OUTPUT_VAL (0x1 << 6): output val (1 = high, 0 = low)
>>>> DEBOUNCE (1 << 16): indicate this pin need debounce.
>>>> DEBOUNCE_VAL (0x3fff << 17): debounce val.
>>>>
>>>> diff --git a/drivers/pinctrl/pinctrl-at91.c
>>>> b/drivers/pinctrl/pinctrl-at91.c
>>>> index 19afb9a..1578a0d 100644
>>>> --- a/drivers/pinctrl/pinctrl-at91.c
>>>> +++ b/drivers/pinctrl/pinctrl-at91.c
>>>> @@ -61,6 +61,9 @@ static int gpio_banks;
>>>> #define DEGLITCH (1 << 2)
>>>> #define PULL_DOWN (1 << 3)
>>>> #define DIS_SCHMIT (1 << 4)
>>>> +#define OUTPUT (1 << 5)
>>>> +#define OUTPUT_VAL_SHIFT 6
>>>> +#define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT)
>>>> #define DEBOUNCE (1 << 16)
>>>> #define DEBOUNCE_VAL_SHIFT 17
>>>> #define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT)
>>>> @@ -333,6 +336,19 @@ static void at91_mux_set_pullup(void __iomem
>>>> *pio, unsigned mask, bool on)
>>>> writel_relaxed(mask, pio + (on ? PIO_PUER : PIO_PUDR));
>>>> }
>>>>
>>>> +static bool at91_mux_get_output(void __iomem *pio, unsigned pin,
>>>> bool *val)
>>>> +{
>>>> + *val = (readl_relaxed(pio + PIO_ODSR) >> pin) & 0x1;
>>>> + return (readl_relaxed(pio + PIO_OSR) >> pin) & 0x1;
>>>> +}
>>>> +
>>>> +static void at91_mux_set_output(void __iomem *pio, unsigned mask,
>>>> bool is_on,
>>>> + bool val)
>>>> +{
>>>> + writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR));
>>>> + writel_relaxed(mask, pio + (is_on ? PIO_OER : PIO_ODR));
>>>> +}
>>>> +
>>>> static unsigned at91_mux_get_multidrive(void __iomem *pio, unsigned
>>>> pin)
>>>> {
>>>> return (readl_relaxed(pio + PIO_MDSR) >> pin) & 0x1;
>>>> @@ -712,6 +728,7 @@ static int at91_pinconf_get(struct pinctrl_dev
>>>> *pctldev,
>>>> void __iomem *pio;
>>>> unsigned pin;
>>>> int div;
>>>> + bool out;
>>>>
>>>> dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__,
>>>> __LINE__, pin_id, *config);
>>>> pio = pin_to_controller(info, pin_to_bank(pin_id));
>>>> @@ -732,6 +749,9 @@ static int at91_pinconf_get(struct pinctrl_dev
>>>> *pctldev,
>>>> if (info->ops->get_schmitt_trig &&
>>>> info->ops->get_schmitt_trig(pio, pin))
>>>> *config |= DIS_SCHMIT;
>>>>
>>>> + if (at91_mux_get_output(pio, pin, &out))
>>>> + *config |= OUTPUT | (out << OUTPUT_VAL_SHIFT);
>>>> +
>>>> return 0;
>>>> }
>>>>
>>>> @@ -749,6 +769,8 @@ static int at91_pinconf_set(struct pinctrl_dev
>>>> *pctldev,
>>>> if (config & PULL_UP && config & PULL_DOWN)
>>>> return -EINVAL;
>>>>
>>>> + at91_mux_set_output(pio, mask, config & OUTPUT,
>>>> + (config & OUTPUT_VAL) >> OUTPUT_VAL_SHIFT);
>>>> at91_mux_set_pullup(pio, mask, config & PULL_UP);
>>>> at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
>>>> if (info->ops->set_deglitch)
>>>> diff --git a/include/dt-bindings/pinctrl/at91.h
>>>> b/include/dt-bindings/pinctrl/at91.h
>>>> index d7988b4..9fd4d48 100644
>>>> --- a/include/dt-bindings/pinctrl/at91.h
>>>> +++ b/include/dt-bindings/pinctrl/at91.h
>>>> @@ -15,6 +15,8 @@
>>>> #define AT91_PINCTRL_DEGLITCH (1 << 2)
>>>> #define AT91_PINCTRL_PULL_DOWN (1 << 3)
>>>> #define AT91_PINCTRL_DIS_SCHMIT (1 << 4)
>>>> +#define AT91_PINCTRL_OUTPUT (1 << 5)
>>>> +#define AT91_PINCTRL_OUTPUT_VAL(x) ((x & 0x1) << 6)
>>>
>>> Can you add this change to the documentation as well:
>>> Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt

Oops! it is already in this patch: sorry for the noise!


>>>> #define AT91_PINCTRL_DEBOUNCE (1 << 16)
>>>> #define AT91_PINCTRL_DEBOUNCE_VA(x) (x << 17)
>>>
>>> Oh, we have a nice typo here! ---^^^^^^
>>> And moreover it would be good to add the mask as well.
>>
>> Do you want me to fix this typo and add mask for DEBOUNCE
>> in a separate patch ?
>
> Yep, if you want.
>
>>> Once the documentation added, you can stick my:

No condition anymore here then.

>>>
>>> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>>>
>>> Thanks, bye,
>>
>>
>>
>
>


--
Nicolas Ferre


\
 
 \ /
  Last update: 2013-08-28 10:41    [W:4.136 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site