lkml.org 
[lkml]   [2013]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] mmc: sdhci: add quirk for max_discard calculation
Date
The SDHCI driver by default specifies a parameter that causes the core
layer to calculate a max discard value which will be set on the mmc queue.
Unfortunately the value calculated because of this would be very small
compared to what comes in by default. As a result of this, any secure
discard kind of operations are very slow.

Add quirk so that the SDHCI host can use the default max_discard value.

CC: Krishna Konda <kkonda@codeaurora.org>
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
drivers/mmc/host/sdhci.c | 3 ++-
include/linux/mmc/sdhci.h | 4 ++++
2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 39544b4..e21bb6f 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2957,7 +2957,8 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
host->timeout_clk = mmc->f_max / 1000;

- mmc->max_discard_to = (1 << 27) / host->timeout_clk;
+ if (!(host->quirks2 & SDHCI_QUIRK2_USE_MAX_DISCARD_SIZE))
+ mmc->max_discard_to = (1 << 27) / host->timeout_clk;

mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;

diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 603ef9d..f42f6dd 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -104,6 +104,10 @@ struct sdhci_host {
#define SDHCI_QUIRK2_SLOW_INT_CLR (1<<7)
/* Ignore CMD CRC errors for tuning commands */
#define SDHCI_QUIRK2_IGNORE_CMDCRC_FOR_TUNING (1<<8)
+/* Dont use the max_discard_to so that the maximum discard unit gets picked by
+ * the mmc queue. Otherwise, it takes a long time for secure discard kind of
+ * operations to complete. */
+#define SDHCI_QUIRK2_USE_MAX_DISCARD_SIZE (1<<9)

int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
1.7.9.5


\
 
 \ /
  Last update: 2013-08-15 17:01    [W:0.070 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site