lkml.org 
[lkml]   [2013]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Qemu-devel] SCSI bus failures with qemu-arm in kernel 3.8+
On Mon, Aug 12, 2013 at 09:49:54PM +0100, Peter Maydell wrote:
> On 12 August 2013 21:06, Russell King - ARM Linux
> <linux@arm.linux.org.uk> wrote:
> > On Mon, Aug 12, 2013 at 06:33:28PM +0100, Peter Maydell wrote:
> >> /* Slot to IRQ mapping for RealView EB and PB1176 backplane
> >> * name slot IntA IntB IntC IntD
> >> * A 31 IRQ50 IRQ51 IRQ48 IRQ49
> >> * B 30 IRQ49 IRQ50 IRQ51 IRQ48
> >> * C 29 IRQ48 IRQ49 IRQ50 IRQ51
> >> * Slot C is for the host bridge; A and B the peripherals.
> >> * Our output irqs 0..3 correspond to the baseboard's 48..51.
> >> */
> >>
> >> ie IRQ48 == board's PCI0 == slot C connector A6 (IntA) == PCI_nINTB
> >> == Slot B connector B8 (IntD) == Slot A connector A7 (IntC).
> >>
> >> and so on round.
> >>
> >> The 926's routing is one extra round of swizzling because the
> >> board itself connects FPGA P_nINTA to its edge connector's
> >> INTB (B7) pin rather than INTA (A6) as the EB/1176 do.
> >> (This isn't even hinted at in the documentation, you need to
> >> either experiment or look at the 926 board schematic.)
> >
> > Okay, so the above just adds to the confusion, because you appear to be
> > mistaking "slot" for the AD signal which the IDSEL pin is connected to.
>
> The board TRM:
> http://infocenter.arm.com/help/topic/com.arm.doc.dui0411d/Cacdijji.html
> says that "slot position" and "AD signal connected to IDSEL"
> are the same thing:

That's realview, not versatile. Are you saying that both are exactly
the same wrt this?

> I don't currently have the h/w set up, but digging in my email
> archives, when we were running the kernel on the real PB926
> h/w and backplane it was indeed reporting the PCI core (ie
> "slot C") as 29, and the other two as 30 and 31:
> [ 128.920150] PCI core found (slot 29)
> [ 128.920875] pci 0000:00:1f.0: reg 10: [io 0x0af0-0x0aff]
> [ 128.920958] pci 0000:00:1f.0: reg 14: [io 0x0a70-0x0a7f]
> [ 128.921032] pci 0000:00:1f.0: reg 18: [io 0x01f0-0x01ff]
> [ 128.921103] pci 0000:00:1f.0: reg 1c: [io 0x0170-0x017f]
> [ 128.921173] pci 0000:00:1f.0: reg 20: [io 0xcc00-0xcc1f]
> [ 128.921244] pci 0000:00:1f.0: reg 24: [io 0x8c00-0x8cff]
> [ 128.921320] pci 0000:00:1f.0: reg 30: [mem 0xffff0000-0xffffffff pref]

With realview or versatile?


\
 
 \ /
  Last update: 2013-08-12 23:41    [W:0.124 / U:0.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site