lkml.org 
[lkml]   [2013]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] net/fs: change busy poll time accounting
Date
Suggested by Linus:
Changed time accounting for busy-poll:
- Make it microsecond based.
- Use unsigned longs.
- Revert back to use time_after instead of time_in_range.
Reorder poll/select busy loop conditions:
- Clear busy_flag after one time we can't busy-poll.
- Only init busy_end if we actually are going to busy-poll.
Added one more missing need_resched() test.

Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
---

fs/select.c | 31 ++++++++++++++++++----------
include/net/ll_poll.h | 55 +++++++++++++++----------------------------------
2 files changed, 37 insertions(+), 49 deletions(-)

diff --git a/fs/select.c b/fs/select.c
index 25cac5f..50a804b 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -403,8 +403,7 @@ int do_select(int n, fd_set_bits *fds, struct timespec *end_time)
int retval, i, timed_out = 0;
unsigned long slack = 0;
unsigned int busy_flag = net_busy_loop_on() ? POLL_BUSY_LOOP : 0;
- u64 busy_start = busy_loop_start_time(busy_flag);
- u64 busy_end = busy_loop_end_time();
+ unsigned long busy_end = 0;

rcu_read_lock();
retval = max_select_fd(n, fds);
@@ -506,9 +505,15 @@ int do_select(int n, fd_set_bits *fds, struct timespec *end_time)
}

/* only if found POLL_BUSY_LOOP sockets && not out of time */
- if (!need_resched() && can_busy_loop &&
- busy_loop_range(busy_start, busy_end))
- continue;
+ if (can_busy_loop && !need_resched()) {
+ if (!busy_end) {
+ busy_end = busy_loop_end_time();
+ continue;
+ }
+ if (!busy_loop_timeout(busy_end))
+ continue;
+ }
+ busy_flag = 0;

/*
* If this is the first loop and we have a timeout
@@ -780,9 +785,7 @@ static int do_poll(unsigned int nfds, struct poll_list *list,
int timed_out = 0, count = 0;
unsigned long slack = 0;
unsigned int busy_flag = net_busy_loop_on() ? POLL_BUSY_LOOP : 0;
- u64 busy_start = busy_loop_start_time(busy_flag);
- u64 busy_end = busy_loop_end_time();
-
+ unsigned long busy_end = 0;

/* Optimise the no-wait case */
if (end_time && !end_time->tv_sec && !end_time->tv_nsec) {
@@ -834,9 +837,15 @@ static int do_poll(unsigned int nfds, struct poll_list *list,
break;

/* only if found POLL_BUSY_LOOP sockets && not out of time */
- if (!need_resched() && can_busy_loop &&
- busy_loop_range(busy_start, busy_end))
- continue;
+ if (can_busy_loop && !need_resched()) {
+ if (!busy_end) {
+ busy_end = busy_loop_end_time();
+ continue;
+ }
+ if (!busy_loop_timeout(busy_end))
+ continue;
+ }
+ busy_flag = 0;

/*
* If this is the first loop and we have a timeout
diff --git a/include/net/ll_poll.h b/include/net/ll_poll.h
index f14dd88..2bacbbf 100644
--- a/include/net/ll_poll.h
+++ b/include/net/ll_poll.h
@@ -47,7 +47,7 @@ static inline bool net_busy_loop_on(void)
* we only care that the average is bounded
*/
#ifdef CONFIG_DEBUG_PREEMPT
-static inline u64 busy_loop_sched_clock(void)
+static inline u64 busy_loop_us_clock(void)
{
u64 rc;

@@ -55,37 +55,24 @@ static inline u64 busy_loop_sched_clock(void)
rc = sched_clock();
preempt_enable_no_resched_notrace();

- return rc;
+ return rc >> 10;
}
#else /* CONFIG_DEBUG_PREEMPT */
-static inline u64 busy_loop_sched_clock(void)
+static inline u64 busy_loop_us_clock(void)
{
- return sched_clock();
+ return sched_clock() >> 10;
}
#endif /* CONFIG_DEBUG_PREEMPT */

-/* we don't mind a ~2.5% imprecision so <<10 instead of *1000
- * sk->sk_ll_usec is a u_int so this can't overflow
- */
-static inline u64 sk_busy_loop_end_time(struct sock *sk)
+static inline unsigned long sk_busy_loop_end_time(struct sock *sk)
{
- return (u64)ACCESS_ONCE(sk->sk_ll_usec) << 10;
+ return busy_loop_us_clock() + ACCESS_ONCE(sk->sk_ll_usec);
}

-/* in poll/select we use the global sysctl_net_ll_poll value
- * only call sched_clock() if enabled
- */
-static inline u64 busy_loop_end_time(void)
-{
- return (u64)ACCESS_ONCE(sysctl_net_ll_poll) << 10;
-}
-
-/* if flag is not set we don't need to know the time
- * so we want to avoid a potentially expensive sched_clock()
- */
-static inline u64 busy_loop_start_time(unsigned int flag)
+/* in poll/select we use the global sysctl_net_ll_poll value */
+static inline unsigned long busy_loop_end_time(void)
{
- return flag ? busy_loop_sched_clock() : 0;
+ return busy_loop_us_clock() + ACCESS_ONCE(sysctl_net_ll_poll);
}

static inline bool sk_can_busy_loop(struct sock *sk)
@@ -94,12 +81,10 @@ static inline bool sk_can_busy_loop(struct sock *sk)
!need_resched() && !signal_pending(current);
}

-/* careful! time_in_range64 will evaluate now twice */
-static inline bool busy_loop_range(u64 start_time, u64 run_time)
-{
- u64 now = busy_loop_sched_clock();

- return time_in_range64(now, start_time, start_time + run_time);
+static inline bool busy_loop_timeout(unsigned long end_time)
+{
+ return time_after(busy_loop_us_clock(), end_time);
}

/* when used in sock_poll() nonblock is known at compile time to be true
@@ -107,8 +92,7 @@ static inline bool busy_loop_range(u64 start_time, u64 run_time)
*/
static inline bool sk_busy_loop(struct sock *sk, int nonblock)
{
- u64 start_time = busy_loop_start_time(!nonblock);
- u64 end_time = sk_busy_loop_end_time(sk);
+ unsigned long end_time = !nonblock ? sk_busy_loop_end_time(sk) : 0;
const struct net_device_ops *ops;
struct napi_struct *napi;
int rc = false;
@@ -139,7 +123,7 @@ static inline bool sk_busy_loop(struct sock *sk, int nonblock)
LINUX_MIB_LOWLATENCYRXPACKETS, rc);

} while (!nonblock && skb_queue_empty(&sk->sk_receive_queue) &&
- busy_loop_range(start_time, end_time));
+ !need_resched() && !busy_loop_timeout(end_time));

rc = !skb_queue_empty(&sk->sk_receive_queue);
out:
@@ -165,12 +149,7 @@ static inline unsigned long net_busy_loop_on(void)
return 0;
}

-static inline u64 busy_loop_start_time(unsigned int flag)
-{
- return 0;
-}
-
-static inline u64 busy_loop_end_time(void)
+static inline unsigned long busy_loop_end_time(void)
{
return 0;
}
@@ -193,9 +172,9 @@ static inline void sk_mark_ll(struct sock *sk, struct sk_buff *skb)
{
}

-static inline bool busy_loop_range(u64 start_time, u64 run_time)
+static inline bool busy_loop_timeout(unsigned long end_time)
{
- return false;
+ return true;
}

#endif /* CONFIG_NET_LL_RX_POLL */


\
 
 \ /
  Last update: 2013-07-10 23:29    [W:0.077 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site