lkml.org 
[lkml]   [2013]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] PCI,pciehp: avoid add a device already exist during pciehp_resume
Date
Currently, pciehp_resume will call pciehp_enable_slot() to add
device if there is a device in the slot. But if the device was
present before suspend, it's no necessary to add again. Now in
such case, there is some uncomfortable message like

pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00

This problem was reported by Paul Bolle <pebolle@tiscali.nl>
The discussion link: http://comments.gmane.org/gmane.linux.kernel.pci/19876

We can use PCIe Device Serial Number to identify the device if
device support DSN.

currently:
1. slot is empty before suspend, insert card during suspend.
In this case, is safe, pciehp will add device by check adapter
status register in pciehp_resume.

2. slot is non empty before suspend, remove card during suspend.
Also be safe, pciehp will remove device by check adapter
status register in pciehp_resume.

3. slot is non empty before suspend, remove card during suspend
and insert a new card.
Now pciehp just call pciehp_enable_slot() roughly. We should
remove the old card firstly, then add the new card.

4. slot is non empty before suspend, no action during suspend.
We should do nothing in pciehp_resume, but we call
pciehp_enable_slot(), so some uncomfortable messages show like above.
In this case, we can improve it a little by add a guard
if (!list_empty(bus->devices)).

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: linux-pci@vger.kernel.org
---
drivers/pci/hotplug/pciehp_core.c | 38 +++++++++++++++++++++++++++++++++---
1 files changed, 34 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 7d72c5e..d01e093 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -291,6 +291,28 @@ static void pciehp_remove(struct pcie_device *dev)
}

#ifdef CONFIG_PM
+
+/* If device support Device Serial Numner, use DSN
+ * to identify the device
+ */
+static bool device_in_slot_is_changed(struct pci_bus *pbus)
+{
+ u64 old_dsn, new_dsn;
+ struct pci_dev *pdev;
+
+ pdev = pci_get_slot(pbus, PCI_DEVFN(0, 0));
+ old_dsn = pdev->sn;
+
+ /* get func 0 device serial number */
+ pci_get_dsn(pdev, &new_dsn);
+ pci_dev_put(pdev);
+
+ if (old_dsn != new_dsn)
+ return true;
+
+ return false;
+}
+
static int pciehp_suspend (struct pcie_device *dev)
{
return 0;
@@ -300,6 +322,7 @@ static int pciehp_resume (struct pcie_device *dev)
{
struct controller *ctrl;
struct slot *slot;
+ struct pci_bus *pbus = dev->port->subordinate;
u8 status;

ctrl = get_service_data(dev);
@@ -311,10 +334,17 @@ static int pciehp_resume (struct pcie_device *dev)

/* Check if slot is occupied */
pciehp_get_adapter_status(slot, &status);
- if (status)
- pciehp_enable_slot(slot);
- else
- pciehp_disable_slot(slot);
+ if (status) {
+ if (list_empty(&pbus->devices))
+ pciehp_enable_slot(slot);
+ else if (device_in_slot_is_changed(pbus)) {
+ pciehp_disable_slot(slot);
+ pciehp_enable_slot(slot);
+ }
+ } else {
+ if (!list_empty(&pbus->devices))
+ pciehp_disable_slot(slot);
+ }
return 0;
}
#endif /* PM */
--
1.7.1



\
 
 \ /
  Last update: 2013-07-10 23:28    [W:0.086 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site