lkml.org 
[lkml]   [2013]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] arm: dts: AM43x: Add usb_otg_hs node
Hello.

On 07/09/2013 06:07 PM, Sergei Shtylyov wrote:

>> Adds device node for HS USB Host module for AM437x

>> changes from v1

>> renamed synopsis to snps
>> removed flag tx-fifo-resize

>> Signed-off-by: George Cherian <george.cherian@ti.com>
>> ---
>> arch/arm/boot/dts/am4372.dtsi | 18 ++++++++++++++++++
>> 1 file changed, 18 insertions(+)

>> diff --git a/arch/arm/boot/dts/am4372.dtsi
>> b/arch/arm/boot/dts/am4372.dtsi
>> index ddc1df7..c9e0da8 100644
>> --- a/arch/arm/boot/dts/am4372.dtsi
>> +++ b/arch/arm/boot/dts/am4372.dtsi
>> @@ -64,5 +64,23 @@
>> compatible = "ti,am4372-counter32k","ti,omap-counter32k";
>> reg = <0x44e86000 0x40>;
>> };
>> +
>> + usb_otg_hs1: am4372_dwc3@48380000 {
>
> See http://www.devicetree.org/Device_Tree_Usage, "Node Names" section.
>
>> + compatible = "ti,am437x-dwc3";
>> + reg = <0x48380000 0x1ff>;

And I bet this should be 0x200, not 0x1ff. This is length, not upper
limit.

>> + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + utmi-mode = <1>;
>> + ranges;
>> +
>> + dwc3@48390000 {

> The same comment.

>> + compatible = "snps,dwc3";
>> + reg = <0x48390000 0xcfff>;

The same, this should be 0xd000, not 0xcfff.

>> + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + };
>> +

WBR, Sergei




\
 
 \ /
  Last update: 2013-07-10 23:38    [W:0.122 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site