lkml.org 
[lkml]   [2013]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RESEND][PATCH] x86, relocs: move ELF relocation handling to C
On 07/08/2013 09:25 PM, Kees Cook wrote:
> On Tue, Jul 2, 2013 at 8:22 PM, Zhang Yanfei <zhangyanfei@cn.fujitsu.com> wrote:
>> Hello Kees,
>>
>> On 07/03/2013 02:22 AM, Kees Cook wrote:
>>> Moves the relocation handling into C, after decompression. This requires
>>> that the decompressed size is passed to the decompression routine as
>>> well so that relocations can be found. Only kernels that need relocation
>>> support will use the code (currently just x86_32), but this is laying
>>> the ground work for 64-bit support in support of KASLR.
>>>
>>> Based on work by Neill Clift and Michael Davidson.
>>>
>>> Signed-off-by: Kees Cook <keescook@chromium.org>
>>> ---
>>> arch/x86/Kconfig | 4 +-
>>> arch/x86/Makefile | 8 ++--
>>> arch/x86/boot/compressed/head_32.S | 31 ++------------
>>> arch/x86/boot/compressed/head_64.S | 1 +
>>> arch/x86/boot/compressed/misc.c | 77 +++++++++++++++++++++++++++++++++-
>>> arch/x86/include/asm/page_32_types.h | 2 +
>>> arch/x86/include/asm/page_64_types.h | 5 ---
>>> arch/x86/include/asm/page_types.h | 6 +++
>>> 8 files changed, 94 insertions(+), 40 deletions(-)
>>>
>>> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
>>> index fe120da..f11ad6f 100644
>>> --- a/arch/x86/Kconfig
>>> +++ b/arch/x86/Kconfig
>>> @@ -1695,13 +1695,13 @@ config RELOCATABLE
>>> it has been loaded at and the compile time physical address
>>> (CONFIG_PHYSICAL_START) is ignored.
>>>
>>> -# Relocation on x86-32 needs some additional build support
>>> +# Relocation on x86 needs some additional build support
>>> config X86_NEED_RELOCS
>>> def_bool y
>>> depends on X86_32 && RELOCATABLE
>>
>> Here it still actually depends on x86_32, so why change the comment?
>
> Yeah, I can leave this as-is.
>
>>> config PHYSICAL_ALIGN
>>> - hex "Alignment value to which kernel should be aligned" if X86_32
>>> + hex "Alignment value to which kernel should be aligned"
>>> default "0x1000000"
>>> range 0x2000 0x1000000
>>
>> If you open this option for x86_64, the range should be modified a bit
>> to indicate the fact that on x86_64, the alignment of the kernel should
>> be at least 2M and the alignment itself should be 2M aligned.
>>
>> otherwise, someone specifies an incorrect value here, say 0x300000,
>> which will cause the error:
>>
>> #error "Invalid value for CONFIG_PHYSICAL_ALIGN"
>>
>> when compiling the kernel.
>
> Are you looking for this to be added to the Kconfig help text, or do
> you mean there should be build-time sanity checks for the value?

I don't know. The sanity check is already in arch/x86/include/asm/boot.h:

/* Minimum kernel alignment, as a power of two */
#ifdef CONFIG_X86_64
#define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT
#else
#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT + THREAD_SIZE_ORDER)
#endif
#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)

#if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN-1)) || \
(CONFIG_PHYSICAL_ALIGN < MIN_KERNEL_ALIGN)
#error "Invalid value for CONFIG_PHYSICAL_ALIGN"
#endif

But just from the config:

range 0x2000 0x1000000

is just a align restriction for x86_32, not for x86_64. So we should
not emit this hint for x86_64, or change this hint to:

config PHYSICAL_ALIGN
hex "Alignment value to which kernel should be aligned"
default "0x1000000"
range 0x2000 0x1000000 if X86_32
range 0x200000 0x1000000 if X86_64

And add the description in the Kconfig help text?

Peter?

>
>>> ---help---
>>> diff --git a/arch/x86/Makefile b/arch/x86/Makefile
>>> index 5c47726..43f8cef 100644
>>> --- a/arch/x86/Makefile
>>> +++ b/arch/x86/Makefile
>>> @@ -16,6 +16,10 @@ endif
>>> # e.g.: obj-y += foo_$(BITS).o
>>> export BITS
>>>
>>> +ifdef CONFIG_X86_NEED_RELOCS
>>> + LDFLAGS_vmlinux := --emit-relocs
>>> +endif
>>> +
>>> ifeq ($(CONFIG_X86_32),y)
>>> BITS := 32
>>> UTS_MACHINE := i386
>>> @@ -25,10 +29,6 @@ ifeq ($(CONFIG_X86_32),y)
>>> KBUILD_AFLAGS += $(biarch)
>>> KBUILD_CFLAGS += $(biarch)
>>>
>>> - ifdef CONFIG_RELOCATABLE
>>> - LDFLAGS_vmlinux := --emit-relocs
>>> - endif
>>> -
>>> KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
>>>
>>> # Never want PIC in a 32-bit kernel, prevent breakage with GCC built
>>> diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
>>> index 1e3184f..5d6f689 100644
>>> --- a/arch/x86/boot/compressed/head_32.S
>>> +++ b/arch/x86/boot/compressed/head_32.S
>>> @@ -181,8 +181,9 @@ relocated:
>>> /*
>>> * Do the decompression, and jump to the new kernel..
>>> */
>>> - leal z_extract_offset_negative(%ebx), %ebp
>>> /* push arguments for decompress_kernel: */
>>> + pushl $z_output_len /* decompressed length */
>>> + leal z_extract_offset_negative(%ebx), %ebp
>>> pushl %ebp /* output address */
>>> pushl $z_input_len /* input_len */
>>> leal input_data(%ebx), %eax
>>> @@ -191,33 +192,7 @@ relocated:
>>> pushl %eax /* heap area */
>>> pushl %esi /* real mode pointer */
>>> call decompress_kernel
>>> - addl $20, %esp
>>> -
>>> -#if CONFIG_RELOCATABLE
>>> -/*
>>> - * Find the address of the relocations.
>>> - */
>>> - leal z_output_len(%ebp), %edi
>>> -
>>> -/*
>>> - * Calculate the delta between where vmlinux was compiled to run
>>> - * and where it was actually loaded.
>>> - */
>>> - movl %ebp, %ebx
>>> - subl $LOAD_PHYSICAL_ADDR, %ebx
>>> - jz 2f /* Nothing to be done if loaded at compiled addr. */
>>> -/*
>>> - * Process relocations.
>>> - */
>>> -
>>> -1: subl $4, %edi
>>> - movl (%edi), %ecx
>>> - testl %ecx, %ecx
>>> - jz 2f
>>> - addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
>>> - jmp 1b
>>> -2:
>>> -#endif
>>> + addl $24, %esp
>>>
>>> /*
>>> * Jump to the decompressed kernel.
>>> diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
>>> index 16f24e6..6632693 100644
>>> --- a/arch/x86/boot/compressed/head_64.S
>>> +++ b/arch/x86/boot/compressed/head_64.S
>>> @@ -340,6 +340,7 @@ relocated:
>>> leaq input_data(%rip), %rdx /* input_data */
>>> movl $z_input_len, %ecx /* input_len */
>>> movq %rbp, %r8 /* output target address */
>>> + movq $z_output_len, %r9 /* decompressed length */
>>> call decompress_kernel
>>> popq %rsi
>>>
>>> diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
>>> index 7cb56c6..b756a04 100644
>>> --- a/arch/x86/boot/compressed/misc.c
>>> +++ b/arch/x86/boot/compressed/misc.c
>>> @@ -267,6 +267,79 @@ static void error(char *x)
>>> asm("hlt");
>>> }
>>>
>>> +#if CONFIG_X86_NEED_RELOCS
>>> +static void handle_relocations(void *output, unsigned long output_len)
>>> +{
>>> + int *reloc;
>>> + unsigned long delta, map, ptr;
>>> + unsigned long min_addr = (unsigned long)output;
>>> + unsigned long max_addr = min_addr + output_len;
>>> +
>>> + /*
>>> + * Calculate the delta between where vmlinux was linked to load
>>> + * and where it was actually loaded.
>>> + */
>>> + delta = min_addr - LOAD_PHYSICAL_ADDR;
>>> + if (!delta) {
>>> + debug_putstr("No relocation needed... ");
>>> + return;
>>> + }
>>> + debug_putstr("Performing relocations... ");
>>> +
>>> + /*
>>> + * The kernel contains a table of relocation addresses. Those
>>> + * addresses have the final load address of the kernel in virtual
>>> + * memory. We are currently working in the self map. So we need to
>>> + * create an adjustment for kernel memory addresses to the self map.
>>> + * This will involve subtracting out the base address of the kernel.
>>> + */
>>> + map = delta - __START_KERNEL_map;
>>> +
>>> + /*
>>> + * Process relocations: 32 bit relocations first then 64 bit after.
>>> + * Two sets of binary relocations are added to the end of the kernel
>>> + * before compression. Each relocation table entry is the kernel
>>> + * address of the location which needs to be updated stored as a
>>> + * 32-bit value which is sign extended to 64 bits.
>>> + *
>>> + * Format is:
>>> + *
>>> + * kernel bits...
>>> + * 0 - zero terminator for 64 bit relocations
>>> + * 64 bit relocation repeated
>>> + * 0 - zero terminator for 32 bit relocations
>>> + * 32 bit relocation repeated
>>> + *
>>> + * So we work backwards from the end of the decompressed image.
>>> + */
>>> + for (reloc = output + output_len - sizeof(*reloc); *reloc; reloc--) {
>>> + int extended = *reloc;
>>> + extended += map;
>>> +
>>> + ptr = (unsigned long)extended;
>>> + if (ptr < min_addr || ptr > max_addr)
>>> + error("32-bit relocation outside of kernel!\n");
>>> +
>>> + *(uint32_t *)ptr += delta;
>>> + }
>>> +#ifdef CONFIG_X86_64
>>> + for (reloc--; *reloc; reloc--) {
>>> + long extended = *reloc;
>>> + extended += map;
>>> +
>>> + ptr = (unsigned long)extended;
>>> + if (ptr < min_addr || ptr > max_addr)
>>> + error("64-bit relocation outside of kernel!\n");
>>> +
>>> + *(uint64_t *)ptr += delta;
>>> + }
>>> +#endif
>>> +}
>>> +#else
>>> +static inline void handle_relocations(void *output, unsigned long output_len)
>>> +{ }
>>> +#endif
>>> +
>>> static void parse_elf(void *output)
>>> {
>>> #ifdef CONFIG_X86_64
>>> @@ -321,7 +394,8 @@ static void parse_elf(void *output)
>>> asmlinkage void decompress_kernel(void *rmode, memptr heap,
>>> unsigned char *input_data,
>>> unsigned long input_len,
>>> - unsigned char *output)
>>> + unsigned char *output,
>>> + unsigned long output_len)
>>> {
>>> real_mode = rmode;
>>>
>>> @@ -361,6 +435,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
>>> debug_putstr("\nDecompressing Linux... ");
>>> decompress(input_data, input_len, NULL, NULL, output, NULL, error);
>>> parse_elf(output);
>>> + handle_relocations(output, output_len);
>>> debug_putstr("done.\nBooting the kernel.\n");
>>> return;
>>> }
>>> diff --git a/arch/x86/include/asm/page_32_types.h b/arch/x86/include/asm/page_32_types.h
>>> index ef17af0..f48b17d 100644
>>> --- a/arch/x86/include/asm/page_32_types.h
>>> +++ b/arch/x86/include/asm/page_32_types.h
>>> @@ -15,6 +15,8 @@
>>> */
>>> #define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL)
>>>
>>> +#define __START_KERNEL_map __PAGE_OFFSET
>>> +
>>> #define THREAD_SIZE_ORDER 1
>>> #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
>>>
>>> diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
>>> index 6c896fb..43dcd80 100644
>>> --- a/arch/x86/include/asm/page_64_types.h
>>> +++ b/arch/x86/include/asm/page_64_types.h
>>> @@ -32,11 +32,6 @@
>>> */
>>> #define __PAGE_OFFSET _AC(0xffff880000000000, UL)
>>>
>>> -#define __PHYSICAL_START ((CONFIG_PHYSICAL_START + \
>>> - (CONFIG_PHYSICAL_ALIGN - 1)) & \
>>> - ~(CONFIG_PHYSICAL_ALIGN - 1))
>>> -
>>> -#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
>>> #define __START_KERNEL_map _AC(0xffffffff80000000, UL)
>>>
>>> /* See Documentation/x86/x86_64/mm.txt for a description of the memory map. */
>>> diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
>>> index 54c9787..086c2fa 100644
>>> --- a/arch/x86/include/asm/page_types.h
>>> +++ b/arch/x86/include/asm/page_types.h
>>> @@ -33,6 +33,12 @@
>>> (((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
>>> VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
>>>
>>> +#define __PHYSICAL_START ((CONFIG_PHYSICAL_START + \
>>> + (CONFIG_PHYSICAL_ALIGN - 1)) & \
>>> + ~(CONFIG_PHYSICAL_ALIGN - 1))
>>
>> I know you just moved the code. Could this macro be like this:
>>
>> #define __PHYSICAL_START ALIGN(CONFIG_PHYSICAL_START, CONFIG_PHYSICAL_ALIGN)
>
> Yeah, I'll fix that too.
>
> Thanks!
>
> -Kees
>
>>
>>> +
>>> +#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
>>> +
>>> #ifdef CONFIG_X86_64
>>> #include <asm/page_64_types.h>
>>> #else
>>>
>>
>>
>> --
>> Thanks.
>> Zhang Yanfei
>
>
>
> --
> Kees Cook
> Chrome OS Security
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


--
Thanks.
Zhang Yanfei


\
 
 \ /
  Last update: 2013-07-10 23:18    [W:0.399 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site