Messages in this thread | | | Date | Mon, 8 Jul 2013 17:24:56 +0530 | From | Kishon Vijay Abraham I <> | Subject | Re: [PATCH 4/5] arm: dts: Add USB phy nodes for AM33XX |
| |
Hi,
On Monday 08 July 2013 04:13 PM, George Cherian wrote: > Add DT bindings of phy nodes for AM33XX platform. > > Signed-off-by: George Cherian <george.cherian@ti.com> > --- > arch/arm/boot/dts/am33xx.dtsi | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > index 8e1248f..4f3cca0 100644 > --- a/arch/arm/boot/dts/am33xx.dtsi > +++ b/arch/arm/boot/dts/am33xx.dtsi > @@ -326,6 +326,25 @@ > status = "disabled"; > }; > > + phy1: usbphy-gs70@44e10620 {
*44e10620* is not needed if you are not having the reg property. > + compatible = "ti,am335x-usb2"; > + #phy-cells = <0>; > + id = <0>; > + }; > + > + phy2: usbphy-gs71@44e10628 { ditto. > + compatible = "ti,am335x-usb2"; > + #phy-cells = <0>; > + id = <1>; > + }; > + > + omap_control_usb: omap-control-usb@44e10620 { > + compatible = "ti,omap-control-usb"; > + reg = <0x44e10620 0x10>; > + reg-names = "control_dev_conf"; > + ti,type = <3>; > + }; > + > usb@47400000 { > compatible = "ti,musb-am33xx"; > reg = <0x47400000 0x1000 /* usbss */ > @@ -341,6 +360,9 @@ > port1-mode = <3>; > power = <250>; > ti,hwmods = "usb_otg_hs"; > + phy-names = "am335x-usb0", "am335x-usb1"; > + phys = <&phy1>, <&phy2>;
Lets have *phys* before *phy-names*.
Thanks Kishon
| |