lkml.org 
[lkml]   [2013]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/4] usb: musb: omap: use the new API to get PHY reference by label
Date
After the devices are created using PLATFORM_DEVID_AUTO,
devm_usb_get_phy_dev and usb_get_phy_dev can't be used reliably
as it relies on the device_names passed in usb_bind_phy. So used the
new API devm_usb_get_phy_by_name to get the PHY reference.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/usb/musb/musb_core.c | 1 +
drivers/usb/musb/musb_core.h | 1 +
drivers/usb/musb/omap2430.c | 2 +-
3 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 29a24ce..5eb6cd7 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1814,6 +1814,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb->min_power = plat->min_power;
musb->ops = plat->platform_ops;
musb->port_mode = plat->mode;
+ musb->phy_name = plat->phy_name;

/* The musb_platform_init() call:
* - adjusts musb->mregs
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 7d341c3..1f0863b 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -424,6 +424,7 @@ struct musb {
unsigned double_buffer_not_ok:1;

struct musb_hdrc_config *config;
+ const char *phy_name;

#ifdef MUSB_CONFIG_PROC_FS
struct proc_dir_entry *proc_entry;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 6708a3b..5b6113a 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -352,7 +352,7 @@ static int omap2430_musb_init(struct musb *musb)
musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
"usb-phy", 0);
else
- musb->xceiv = devm_usb_get_phy_dev(dev, 0);
+ musb->xceiv = devm_usb_get_phy_by_name(dev, musb->phy_name);

if (IS_ERR(musb->xceiv)) {
status = PTR_ERR(musb->xceiv);
--
1.7.10.4


\
 
 \ /
  Last update: 2013-07-10 23:12    [W:0.072 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site