lkml.org 
[lkml]   [2013]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: scripts/kallsyms: Avoid ARM veneer symbols
On Sat, Jul 06, 2013 at 01:34:56AM +0200, Arnd Bergmann wrote:
> On Friday 05 July 2013, Dave P Martin wrote:
> > On Fri, Jul 05, 2013 at 05:42:44PM +0100, Arnd Bergmann wrote:
> > > On Friday 05 July 2013, Dave P Martin wrote:
> > > > On Wed, Jul 03, 2013 at 06:03:04PM +0200, Arnd Bergmann wrote:
> >
> > I think there are a small number of patterns to check for.
> >
> > __*_veneer, __*_from_arm and __*_from_thumb should cover most cases.
>
> Ok.
>
> > > * There are actually symbols without a name on ARM, which screws up the
> > > kallsyms.c parser. These also seem to be veneers, but attached to some
> > > random function:
> >
> > Hmmm, I don't what those are. By default, we should probably ignore those
> > too. Maybe they have something to do with link-time relocation processing.
>
> Definitely link-time. It only shows up after the final link, and only
> with ld.bfd not with ld.gold as I found out now.
>
> > > $ nm obj-tmp/.tmp_vmlinux1 | head
> > > c09e8db1 t
> > > c09e8db5 t
> > > c09e8db9 t # <==========
> > > c09e8dbd t
> > > c0abfc29 t
> > > c0008000 t $a
> > > c0f7b640 t $a
> > >
> > > $ objdump -Dr obj-tmp/.tmp_vmlinux1 | grep -C 30 c09e8db.
> > > c0851fcc <wlc_phy_edcrs_lock>:
> > > c0851fcc: b538 push {r3, r4, r5, lr}
> > > c0851fce: b500 push {lr}
> > > c0851fd0: f7bb d8dc bl c000d18c <__gnu_mcount_nc>
> > > c0851fd4: f240 456b movw r5, #1131 ; 0x46b
> > > c0851fd8: 4604 mov r4, r0
> > > c0851fda: f880 14d5 strb.w r1, [r0, #1237] ; 0x4d5
> > > c0851fde: 462a mov r2, r5
> > > c0851fe0: f44f 710b mov.w r1, #556 ; 0x22c
> > > c0851fe4: f7ff fe6d bl c0851cc2 <write_phy_reg>
> > > c0851fe8: 4620 mov r0, r4
> > > c0851fea: 462a mov r2, r5
> > > c0851fec: f240 212d movw r1, #557 ; 0x22d
> > > c0851ff0: f7ff fe67 bl c0851cc2 <write_phy_reg>
> > > c0851ff4: 4620 mov r0, r4
> > > c0851ff6: f240 212e movw r1, #558 ; 0x22e
> > > c0851ffa: f44f 7270 mov.w r2, #960 ; 0x3c0
> > > c0851ffe: f196 fedb bl c09e8db8 <tpci200_free_irq+0x78> # <===========
> > > c0852002: 4620 mov r0, r4
> > > c0852004: f240 212f movw r1, #559 ; 0x22f
> > > c0852008: f44f 7270 mov.w r2, #960 ; 0x3c0
> > > c085200c: e8bd 4038 ldmia.w sp!, {r3, r4, r5, lr}
> > > c0852010: f7ff be57 b.w c0851cc2 <write_phy_reg>
> > >
> > >
> > > ... # in tpci200_free_irq:
> > > c09e8d9e: e003 b.n c09e8da8 <tpci200_free_irq+0x68>
> > > c09e8da0: f06f 0415 mvn.w r4, #21
> > > c09e8da4: e000 b.n c09e8da8 <tpci200_free_irq+0x68>
> > > c09e8da6: 4c01 ldr r4, [pc, #4] ; (c09e8dac <tpci200_free_irq+0x6c>)
> > > c09e8da8: 4620 mov r0, r4
> > > c09e8daa: bdf8 pop {r3, r4, r5, r6, r7, pc}
> > > c09e8dac: fffffe00 ; <UNDEFINED> instruction: 0xfffffe00
> > > c09e8db0: f4cf b814 b.w c06b7ddc <bna_enet_sm_chld_stop_wait_entry>
> > > c09e8db4: f53e bed8 b.w c0727b68 <gem_do_stop>
> > > c09e8db8: f668 bf83 b.w c0851cc2 <write_phy_reg> # <==========
> > > c09e8dbc: d101 bne.n c09e8dc2 <tpci200_free_irq+0x82>
> > > c09e8dbe: f435 b920 b.w c061e002 <twl_reset_sequence+0x34c>
> > >
> > > It makes no sense to me at all that a function in one driver can just call
> > > write_phy_reg a couple of times, but need a veneer in the middle, and put
> > > that veneer in a totally unrelated function in another driver!
> >
> > I think that if ld inserts a veneer for a function anywhere, branches
> > from any object in the link to that target symbol can reuse the same
> > veneer as a trampoline, effectively appearing to branch through an
> > unrelated location to reach the destination.
>
> That part makes sense, but it doesn't explain why ld would do that just
> for the third out of four identical function calls in the example above.
>
> > ld inserts veneers between individual input sections, but I don't
> > think they have to go next to the same section the branch originates
> > from. In the above code, it looks like that series of unconditional
> > branches after the end of tpci200_free_irq might be a common veneer pool
> > for many different destinations.
>
> Yes, exactly. In this build I had six of these nameless symbols, and five
> of them were in this one function.
>
> > LTO may also make the expected compilation unit boundaries disappear
> > completely. Anything could end up almost anywhere in that case.
> > Files could get intermingled, inlined and generally spread all over the
> > place.
>
> I'm not sure we actually want to enable that in the kernel ;-)
>
> In particular in combination with kallsyms, it would make the kallsyms
> information rather useless when we can no longer infer a function name
> from an address.

Well, indeed. But that's a separate discussion -- I don't think we want
to block it needlessly just due to an obscure feature of the ARM toolchain.

Ignoring veneers and nameless symbols in kallsyms sounds like a reasonable
approach for now, even if it's not a perfect.

> > Even so, veneers shouldn't be needed in the common case where we're not
> > jumping across .rodata.
> >
> > >
> > > If this is a binutils bug or gcc bug, we should probably just fix it, but it
> > > might be easier to work around it by changing kallsyms.c some more.
> >
> > I haven't found a trivial way to reproduce those nameless symbols.
> > I don't know whether they're a bug or not...
> >
> > Making kallsyms robust against this might be a good idea anyway.
>
> Maybe we can find a binutils expert next week at Linaro connect to take a
> look at the data. I can prepare a test case.

Sure, that could be worth a try.

Cheers
---Dave


\
 
 \ /
  Last update: 2013-07-10 23:12    [W:0.051 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site