lkml.org 
[lkml]   [2013]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH] regulator: build: Sort Kconfig
From: Mark Brown <broonie@linaro.org>

Reduces merge issues if nothing else.

Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/Kconfig | 244 ++++++++++++++++++++++-----------------------
drivers/regulator/Makefile | 2 +-
2 files changed, 123 insertions(+), 123 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index f1e6ad9..759b601 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -64,15 +64,11 @@ config REGULATOR_USERSPACE_CONSUMER

If unsure, say no.

-config REGULATOR_GPIO
- tristate "GPIO regulator support"
- depends on GPIOLIB
+config REGULATOR_88PM8607
+ bool "Marvell 88PM8607 Power regulators"
+ depends on MFD_88PM860X=y
help
- This driver provides support for regulators that can be
- controlled via gpios.
- It is capable of supporting current and voltage regulators
- and the platform has to provide a mapping of GPIO-states
- to target volts/amps.
+ This driver supports 88PM8607 voltage regulator chips.

config REGULATOR_AD5398
tristate "Analog Devices AD5398/AD5821 regulators"
@@ -81,6 +77,14 @@ config REGULATOR_AD5398
This driver supports AD5398 and AD5821 current regulator chips.
If building into module, its name is ad5398.ko.

+config REGULATOR_ANATOP
+ tristate "Freescale i.MX on-chip ANATOP LDO regulators"
+ depends on MFD_SYSCON
+ help
+ Say y here to support Freescale i.MX on-chip ANATOP LDOs
+ regulators. It is recommended that this option be
+ enabled on i.MX6 platform.
+
config REGULATOR_AAT2870
tristate "AnalogicTech AAT2870 Regulators"
depends on MFD_AAT2870_CORE
@@ -88,6 +92,22 @@ config REGULATOR_AAT2870
If you have a AnalogicTech AAT2870 say Y to enable the
regulator driver.

+config REGULATOR_AB3100
+ tristate "ST-Ericsson AB3100 Regulator functions"
+ depends on AB3100_CORE
+ default y if AB3100_CORE
+ help
+ These regulators correspond to functionality in the
+ AB3100 analog baseband dealing with power regulators
+ for the system.
+
+config REGULATOR_AB8500
+ bool "ST-Ericsson AB8500 Power Regulators"
+ depends on AB8500_CORE
+ help
+ This driver supports the regulators found on the ST-Ericsson mixed
+ signal AB8500 PMIC
+
config REGULATOR_ARIZONA
tristate "Wolfson Arizona class devices"
depends on MFD_ARIZONA
@@ -96,6 +116,13 @@ config REGULATOR_ARIZONA
Support for the regulators found on Wolfson Arizona class
devices.

+config REGULATOR_AS3711
+ tristate "AS3711 PMIC"
+ depends on MFD_AS3711
+ help
+ This driver provides support for the voltage regulators on the
+ AS3711 PMIC
+
config REGULATOR_DA903X
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
depends on PMIC_DA903X
@@ -120,6 +147,17 @@ config REGULATOR_DA9055
This driver can also be built as a module. If so, the module
will be called da9055-regulator.

+config REGULATOR_DBX500_PRCMU
+ bool
+
+config REGULATOR_DB8500_PRCMU
+ bool "ST-Ericsson DB8500 Voltage Domain Regulators"
+ depends on MFD_DB8500_PRCMU
+ select REGULATOR_DBX500_PRCMU
+ help
+ This driver supports the voltage domain regulators controlled by the
+ DB8500 PRCMU
+
config REGULATOR_FAN53555
tristate "Fairchild FAN53555 Regulator"
depends on I2C
@@ -131,44 +169,57 @@ config REGULATOR_FAN53555
input voltage supply of 2.5V to 5.5V. The output voltage is
programmed through an I2C interface.

-config REGULATOR_ANATOP
- tristate "Freescale i.MX on-chip ANATOP LDO regulators"
- depends on MFD_SYSCON
+config REGULATOR_GPIO
+ tristate "GPIO regulator support"
+ depends on GPIOLIB
help
- Say y here to support Freescale i.MX on-chip ANATOP LDOs
- regulators. It is recommended that this option be
- enabled on i.MX6 platform.
+ This driver provides support for regulators that can be
+ controlled via gpios.
+ It is capable of supporting current and voltage regulators
+ and the platform has to provide a mapping of GPIO-states
+ to target volts/amps.

-config REGULATOR_MC13XXX_CORE
- tristate
+config REGULATOR_ISL6271A
+ tristate "Intersil ISL6271A Power regulator"
+ depends on I2C
+ help
+ This driver supports ISL6271A voltage regulator chip.

-config REGULATOR_MC13783
- tristate "Freescale MC13783 regulator driver"
- depends on MFD_MC13783
- select REGULATOR_MC13XXX_CORE
+config REGULATOR_LP3971
+ tristate "National Semiconductors LP3971 PMIC regulator driver"
+ depends on I2C
help
- Say y here to support the regulators found on the Freescale MC13783
- PMIC.
+ Say Y here to support the voltage regulators and convertors
+ on National Semiconductors LP3971 PMIC

-config REGULATOR_MC13892
- tristate "Freescale MC13892 regulator driver"
- depends on MFD_MC13XXX
- select REGULATOR_MC13XXX_CORE
+config REGULATOR_LP3972
+ tristate "National Semiconductors LP3972 PMIC regulator driver"
+ depends on I2C
help
- Say y here to support the regulators found on the Freescale MC13892
- PMIC.
+ Say Y here to support the voltage regulators and convertors
+ on National Semiconductors LP3972 PMIC

-config REGULATOR_ISL6271A
- tristate "Intersil ISL6271A Power regulator"
+config REGULATOR_LP872X
+ bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
+ depends on I2C=y
+ select REGMAP_I2C
+ help
+ This driver supports LP8720/LP8725 PMIC
+
+config REGULATOR_LP8755
+ tristate "TI LP8755 High Performance PMU driver"
depends on I2C
+ select REGMAP_I2C
help
- This driver supports ISL6271A voltage regulator chip.
+ This driver supports LP8755 High Performance PMU driver. This
+ chip contains six step-down DC/DC converters which can support
+ 9 mode multiphase configuration.

-config REGULATOR_88PM8607
- bool "Marvell 88PM8607 Power regulators"
- depends on MFD_88PM860X=y
+config REGULATOR_LP8788
+ bool "TI LP8788 Power Regulators"
+ depends on MFD_LP8788
help
- This driver supports 88PM8607 voltage regulator chips.
+ This driver supports LP8788 voltage regulator chip.

config REGULATOR_MAX1586
tristate "Maxim 1586/1587 voltage regulator"
@@ -259,48 +310,43 @@ config REGULATOR_MAX77693
and one current regulator 'CHARGER'. This is suitable for
Exynos-4x12 chips.

-config REGULATOR_PCAP
- tristate "Motorola PCAP2 regulator driver"
- depends on EZX_PCAP
- help
- This driver provides support for the voltage regulators of the
- PCAP2 PMIC.
+config REGULATOR_MC13XXX_CORE
+ tristate

-config REGULATOR_LP3971
- tristate "National Semiconductors LP3971 PMIC regulator driver"
- depends on I2C
+config REGULATOR_MC13783
+ tristate "Freescale MC13783 regulator driver"
+ depends on MFD_MC13783
+ select REGULATOR_MC13XXX_CORE
help
- Say Y here to support the voltage regulators and convertors
- on National Semiconductors LP3971 PMIC
+ Say y here to support the regulators found on the Freescale MC13783
+ PMIC.

-config REGULATOR_LP3972
- tristate "National Semiconductors LP3972 PMIC regulator driver"
- depends on I2C
+config REGULATOR_MC13892
+ tristate "Freescale MC13892 regulator driver"
+ depends on MFD_MC13XXX
+ select REGULATOR_MC13XXX_CORE
help
- Say Y here to support the voltage regulators and convertors
- on National Semiconductors LP3972 PMIC
+ Say y here to support the regulators found on the Freescale MC13892
+ PMIC.

-config REGULATOR_LP872X
- bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
- depends on I2C=y
- select REGMAP_I2C
+config REGULATOR_PALMAS
+ tristate "TI Palmas PMIC Regulators"
+ depends on MFD_PALMAS
help
- This driver supports LP8720/LP8725 PMIC
+ If you wish to control the regulators on the Palmas series of
+ chips say Y here. This will enable support for all the software
+ controllable SMPS/LDO regulators.

-config REGULATOR_LP8755
- tristate "TI LP8755 High Performance PMU driver"
- depends on I2C
- select REGMAP_I2C
- help
- This driver supports LP8755 High Performance PMU driver. This
- chip contains six step-down DC/DC converters which can support
- 9 mode multiphase configuration.
+ The regulators available on Palmas series chips vary depending
+ on the muxing. This is handled automatically in the driver by
+ reading the mux info from OTP.

-config REGULATOR_LP8788
- bool "TI LP8788 Power Regulators"
- depends on MFD_LP8788
+config REGULATOR_PCAP
+ tristate "Motorola PCAP2 regulator driver"
+ depends on EZX_PCAP
help
- This driver supports LP8788 voltage regulator chip.
+ This driver provides support for the voltage regulators of the
+ PCAP2 PMIC.

config REGULATOR_PCF50633
tristate "NXP PCF50633 regulator driver"
@@ -335,44 +381,15 @@ config REGULATOR_S5M8767
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
supports DVS mode with 8bits of output voltage control.

-config REGULATOR_AB3100
- tristate "ST-Ericsson AB3100 Regulator functions"
- depends on AB3100_CORE
- default y if AB3100_CORE
- help
- These regulators correspond to functionality in the
- AB3100 analog baseband dealing with power regulators
- for the system.
-
-config REGULATOR_AB8500
- bool "ST-Ericsson AB8500 Power Regulators"
- depends on AB8500_CORE
- help
- This driver supports the regulators found on the ST-Ericsson mixed
- signal AB8500 PMIC
-
-config REGULATOR_DBX500_PRCMU
- bool
-
-config REGULATOR_DB8500_PRCMU
- bool "ST-Ericsson DB8500 Voltage Domain Regulators"
- depends on MFD_DB8500_PRCMU
- select REGULATOR_DBX500_PRCMU
- help
- This driver supports the voltage domain regulators controlled by the
- DB8500 PRCMU
-
-config REGULATOR_PALMAS
- tristate "TI Palmas PMIC Regulators"
- depends on MFD_PALMAS
+config REGULATOR_TI_ABB
+ bool "TI Adaptive Body Bias on-chip LDO"
+ depends on ARCH_OMAP
help
- If you wish to control the regulators on the Palmas series of
- chips say Y here. This will enable support for all the software
- controllable SMPS/LDO regulators.
-
- The regulators available on Palmas series chips vary depending
- on the muxing. This is handled automatically in the driver by
- reading the mux info from OTP.
+ Select this option to support Texas Instruments' on-chip Adaptive Body
+ Bias (ABB) LDO regulators. It is recommended that this option be
+ enabled on required TI SoC. Certain Operating Performance Points
+ on TI SoCs may be unstable without enabling this as it provides
+ device specific optimized bias to allow/optimize functionality.

config REGULATOR_TPS51632
tristate "TI TPS51632 Power Regulator"
@@ -481,16 +498,6 @@ config REGULATOR_TWL4030
This driver supports the voltage regulators provided by
this family of companion chips.

-config REGULATOR_TI_ABB
- bool "TI Adaptive Body Bias on-chip LDO"
- depends on ARCH_OMAP
- help
- Select this option to support Texas Instruments' on-chip Adaptive Body
- Bias (ABB) LDO regulators. It is recommended that this option be
- enabled on required TI SoC. Certain Operating Performance Points
- on TI SoCs may be unstable without enabling this as it provides
- device specific optimized bias to allow/optimize functionality.
-
config REGULATOR_VEXPRESS
tristate "Versatile Express regulators"
depends on VEXPRESS_CONFIG
@@ -526,12 +533,5 @@ config REGULATOR_WM8994
This driver provides support for the voltage regulators on the
WM8994 CODEC.

-config REGULATOR_AS3711
- tristate "AS3711 PMIC"
- depends on MFD_AS3711
- help
- This driver provides support for the voltage regulators on the
- AS3711 PMIC
-
endif

diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index ba4a3cf..d240772 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
+obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
@@ -64,7 +65,6 @@ obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
-obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
--
1.8.3.2


\
 
 \ /
  Last update: 2013-07-05 22:21    [W:0.047 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site