lkml.org 
[lkml]   [2013]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[patch v1]mfd: fix for DA9055 driver initialization
From
Date
This patch clears all the events received while powering up DA9055.
While powering up DA9055,power sequencer and gpio events are received.
These events remain uncleared after boot up, due to which further event handling also fails.
DA9055 has three event registers.The event register bits are set to '1' on receiving an event.
The events can be cleared on writing a '1' to the set bit, which would then clear that bit to '0'
After applying this patch we have a clean state after boot up.

Signed-off-by: Ankur Raina <Ankur.Raina@kpitcummins.com>
---
drivers/mfd/da9055-core.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/da9055-core.c b/drivers/mfd/da9055-core.c
index 49cb23d..e4c0596 100644
--- a/drivers/mfd/da9055-core.c
+++ b/drivers/mfd/da9055-core.c
@@ -381,6 +381,7 @@ int da9055_device_init(struct da9055 *da9055)
{
struct da9055_pdata *pdata = da9055->dev->platform_data;
int ret;
+ uint8_t clear_events[3] = {0xFF, 0xFF, 0xFF};

if (pdata && pdata->init != NULL)
pdata->init(da9055);
@@ -390,6 +391,10 @@ int da9055_device_init(struct da9055 *da9055)
else
da9055->irq_base = pdata->irq_base;

+ ret = da9055_group_write(da9055, DA9055_REG_EVENT_A, 3, clear_events);
+ if (ret < 0)
+ return ret;
+
ret = regmap_add_irq_chip(da9055->regmap, da9055->chip_irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
da9055->irq_base, &da9055_regmap_irq_chip,
--
1.7.1



\
 
 \ /
  Last update: 2013-07-05 16:01    [W:0.037 / U:1.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site