lkml.org 
[lkml]   [2013]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC v3 1/5] dma: mpc512x: reorder mpc8308 specific instructions
Date
From: Gerhard Sittig <gsi@denx.de>

Concentrate the test and the specific code for MPC8308
in the 'if' branch and handle MPC512x in the 'else' branch.

This modification only reorders instructions but doesn't change behaviour.

Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com>
---
drivers/dma/mpc512x_dma.c | 42 +++++++++++++++++++++++++-----------------
1 file changed, 25 insertions(+), 17 deletions(-)

diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 2d95673..b8881de 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -50,9 +50,17 @@
#define MPC_DMA_DESCRIPTORS 64

/* Macro definitions */
-#define MPC_DMA_CHANNELS 64
#define MPC_DMA_TCD_OFFSET 0x1000

+/*
+ * Maximum channel counts for individual hardware variants
+ * and the maximum channel count over all supported controllers,
+ * used for data structure size
+ */
+#define MPC8308_DMACHAN_MAX 16
+#define MPC512x_DMACHAN_MAX 64
+#define MPC_DMA_CHANNELS 64
+
/* Arbitration mode of group and channel */
#define MPC_DMA_DMACR_EDCG (1 << 31)
#define MPC_DMA_DMACR_ERGA (1 << 3)
@@ -716,10 +724,10 @@ static int mpc_dma_probe(struct platform_device *op)

dma = &mdma->dma;
dma->dev = dev;
- if (!mdma->is_mpc8308)
- dma->chancnt = MPC_DMA_CHANNELS;
+ if (mdma->is_mpc8308)
+ dma->chancnt = MPC8308_DMACHAN_MAX;
else
- dma->chancnt = 16; /* MPC8308 DMA has only 16 channels */
+ dma->chancnt = MPC512x_DMACHAN_MAX;
dma->device_alloc_chan_resources = mpc_dma_alloc_chan_resources;
dma->device_free_chan_resources = mpc_dma_free_chan_resources;
dma->device_issue_pending = mpc_dma_issue_pending;
@@ -753,7 +761,19 @@ static int mpc_dma_probe(struct platform_device *op)
* - Round-robin group arbitration,
* - Round-robin channel arbitration.
*/
- if (!mdma->is_mpc8308) {
+ if (mdma->is_mpc8308) {
+ /* MPC8308 has 16 channels and lacks some registers */
+ out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA);
+
+ /* enable snooping */
+ out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE);
+ /* Disable error interrupts */
+ out_be32(&mdma->regs->dmaeeil, 0);
+
+ /* Clear interrupts status */
+ out_be32(&mdma->regs->dmaintl, 0xFFFF);
+ out_be32(&mdma->regs->dmaerrl, 0xFFFF);
+ } else {
out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_EDCG |
MPC_DMA_DMACR_ERGA | MPC_DMA_DMACR_ERCA);

@@ -774,18 +794,6 @@ static int mpc_dma_probe(struct platform_device *op)
/* Route interrupts to IPIC */
out_be32(&mdma->regs->dmaihsa, 0);
out_be32(&mdma->regs->dmailsa, 0);
- } else {
- /* MPC8308 has 16 channels and lacks some registers */
- out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA);
-
- /* enable snooping */
- out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE);
- /* Disable error interrupts */
- out_be32(&mdma->regs->dmaeeil, 0);
-
- /* Clear interrupts status */
- out_be32(&mdma->regs->dmaintl, 0xFFFF);
- out_be32(&mdma->regs->dmaerrl, 0xFFFF);
}

/* Register DMA engine */
--
1.7.11.3


\
 
 \ /
  Last update: 2013-07-31 09:41    [W:0.141 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site