lkml.org 
[lkml]   [2013]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] PCI: update device mps when doing pci hotplug
On Wed, Jul 31, 2013 at 11:53 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> On Wed, Jul 31, 2013 at 3:15 AM, Yijing Wang <wangyijing@huawei.com> wrote:
>> Hi Bjorn,
>> I didn't observe a performance difference between MPS=128 and MPS=512. I use ping $dest_ip -s 65500(large size packet)
>> to test the different situations.
>
> Interesting. "ping" is probably not a good way to see performance
> differences, but hopefully you could see a difference in *some*
> scenario. Otherwise, there's not much point in increasing MPS :)
>
>>> I assume there are no AER or other errors logged by the root port?
>> Yes, AER is not support in local machine.
>
> Per the 5520/5500 spec, it does support AER (sec 19.11.5). Maybe
> there's some platform support required in addition. You might still
> be able to see some info just with "lspci -vv"
>
>> Hmmm, PCIe Spec does not involve too much about MPS setting. So maybe different platform
>> has different strategy.
>
> I think there's enough in the spec to tell us what we need to do (this
> is sec 2.2.2):
>
> - A Transmitter must not send a TLP larger than its Max_Payload_Size
> - A Receiver must treat TLPs larger than its Max_Payload_Size as malformed
>
> The only way I can see to guarantee that is to set the MPS on both
> ends of the link the same.
>
>> Conservatively, as a improvement for mps setting after hotplug. I think update mps setting equal to its parent
>> make sense. This is no harm to other devices, we only modify the hotplug device itself mps register.
>>
>> So if you agree, I will update my patch ,only try to modify hotplug device mps, make them equal to its parent.
>
> Yes, I think that would be safe. If the switch is set to a larger MPS
> than the hot-added device supports, I don't think we can safely use
> the device.

I opened a bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60671
for this problem. Please correct any mistakes in my summary and
reference it in your changelog.

Bjorn


\
 
 \ /
  Last update: 2013-07-31 23:01    [W:0.111 / U:1.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site