lkml.org 
[lkml]   [2013]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard
Date
Re-sending as text.

From: Justin Piszcz [mailto:jpiszcz@lucidpixels.com]
Sent: Wednesday, July 03, 2013 5:00 PM
To: 'Guenter Roeck'
Cc: linux-kernel@vger.kernel.org; lm-sensors@lm-sensors.org
Subject: RE: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro
X9SRL-F motherboard



-----Original Message-----
From: Guenter Roeck [mailto:linux@roeck-us.net]
Sent: Wednesday, July 03, 2013 4:57 PM
To: Justin Piszcz
Cc: linux-kernel@vger.kernel.org; lm-sensors@lm-sensors.org
Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro
X9SRL-F motherboard

[ .. ]

> 09: 0a 00 00 00 00 0a 0a 0a 0a aa ef 80 ff 40 46 c4
> 0a: 0e 01 00 00 ff 00 00 ff 00 00 80 66 66 06 01 01
                                                ^^
This shows that PECI Agent 0 is supposed to be enabled.

> Bank 2:
>     00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
> 00: 8c 32 00 01 01 33 01 3c ff 33 ff ff 00 ff ff ff
      ^^
This value suggests that the second temperature sensor (the one creating
the alarm) is supposed to be the PECI source (which reports the CPU
temperature
to the NCT6776), and that it is supposed to be used to control the speed
of the CPU fan.
            ^^
Fan control is in manual mode. Did you set this ?
It is quite unusual.

Setting:               
Current FAN Mode is Optimal.
Set Fan to Standard Speed
Set Fan to Full Speed
Set Fan to Optimal Speed

> Bank 7:
>     00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
> 00: ff 95 02 10 00 00 00 00 00 64 00 00 00 00 00 00
> 01: 00 00 00 00 00 00 00 f8 80 f8 80 f8 80 f8 80 00
                                                   ^^
00 here shows that the PECI source is not active, ie the CPU does not
deliver
PECI data to the NCT6776. This explains the alarm.

Practical impact is probably limited as fan control is configured to be
manual
anyway, but I wonder why PECI doesn't work on your board. PECI configuration
is identical to my Supermicro board.

Guenter


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-07-03 23:21    [W:0.070 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site