lkml.org 
[lkml]   [2013]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/3] cpuidle/powernv: Enable idle powernv cpu to call into the cpuidle framework.
On 07/29/2013 08:14 PM, Daniel Lezcano wrote:
> On 07/29/2013 04:27 PM, Deepthi Dharwar wrote:
>> On 07/27/2013 10:59 AM, Daniel Lezcano wrote:
>>> On 07/23/2013 11:01 AM, Deepthi Dharwar wrote:
>>>> This patch enables idle powernv cpu to hook on to the cpuidle
>>>> framework, if available, else call on to default idle platform
>>>> code.
>>>
>>> Why do you need to do that ?
>>>
>>
>> Hi Daniel,
>>
>> Well, this is needed in case when one does not compile with CPU_IDLE
>> config option.
>>
>> When CPUIDLE is not configured, idle cpus are needed to be running some
>> sort of default idle code or loop ( in the worst case) if cpuidle driver
>> is not registered or if one decides not to have that config enabled.
>
> Hi Deepthi,
>
> ok may be there is some difference with the other platform but the
> arch_cpu_idle function defined in the other archs do:
>
> void arch_cpu_idle(void)
> {
> if (cpuidle_idle_call())
> x86_idle();
> else
> local_irq_enable();
> }
>
> or
>
> void arch_cpu_idle(void)
> {
> if (cpuidle_idle_call())
> default_idle();
> }
>
> When the cpuidle driver is not compiled or not loaded, cpuidle_idle_call
> fails, falling back to the default idle function.
>
> The arch_cpu_idle function is called from the generic code in
> kernel/cpu/idle.c.
>
> Is there a particular reason to do it in a different way ?

On powerpc, we have another parameter, ppc_md.powersave
knob. In arch_cpu_idle, we check for this knob. This is kernel command
line parameter too. If this is not set then default idle is executed.
ppc_md is generic powerpc structure, which points to idle routine that
needs to be executed.

In arch_cpu_idle code for powerpc:

arch_cpu_idle()
{
if (ppc_md.powersave())
ppc_md.powersave()
} else
/* default idle */
}

Not all flavors of powerpc arch support cpuidle.
So only those that support, powersave is set to cpuidle backend call.
And this check is necessary there.

Regards,
Deepthi



> Thanks
> -- Daniel
>
>>>
>>>> Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
>>>> ---
>>>> arch/powerpc/platforms/powernv/setup.c | 12 +++++++++++-
>>>> 1 file changed, 11 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
>>>> index 84438af..97d0951 100644
>>>> --- a/arch/powerpc/platforms/powernv/setup.c
>>>> +++ b/arch/powerpc/platforms/powernv/setup.c
>>>> @@ -25,6 +25,7 @@
>>>> #include <linux/of.h>
>>>> #include <linux/interrupt.h>
>>>> #include <linux/bug.h>
>>>> +#include <linux/cpuidle.h>
>>>>
>>>> #include <asm/machdep.h>
>>>> #include <asm/firmware.h>
>>>> @@ -196,6 +197,15 @@ static int __init pnv_probe(void)
>>>> return 1;
>>>> }
>>>>
>>>> +void powernv_idle(void)
>>>> +{
>>>> + /* Hook to cpuidle framework if available, else
>>>> + * call on default platform idle code
>>>> + */
>>>> + if (cpuidle_idle_call())
>>>> + power7_idle();
>>>> +}
>>>> +
>>>> define_machine(powernv) {
>>>> .name = "PowerNV",
>>>> .probe = pnv_probe,
>>>> @@ -205,7 +215,7 @@ define_machine(powernv) {
>>>> .show_cpuinfo = pnv_show_cpuinfo,
>>>> .progress = pnv_progress,
>>>> .machine_shutdown = pnv_shutdown,
>>>> - .power_save = power7_idle,
>>>> + .power_save = powernv_idle,
>>>> .calibrate_decr = generic_calibrate_decr,
>>>> #ifdef CONFIG_KEXEC
>>>> .kexec_cpu_down = pnv_kexec_cpu_down,
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>> Please read the FAQ at http://www.tux.org/lkml/
>>>>
>>>
>>>
>>
>
>



\
 
 \ /
  Last update: 2013-07-30 06:01    [W:0.057 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site