lkml.org 
[lkml]   [2013]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [patch 6/6] mm: memcg: do not trap chargers with full callstack on OOM
On Thu 25-07-13 18:25:38, Johannes Weiner wrote:
> The memcg OOM handling is incredibly fragile and can deadlock. When a
> task fails to charge memory, it invokes the OOM killer and loops right
> there in the charge code until it succeeds. Comparably, any other
> task that enters the charge path at this point will go to a waitqueue
> right then and there and sleep until the OOM situation is resolved.
> The problem is that these tasks may hold filesystem locks and the
> mmap_sem; locks that the selected OOM victim may need to exit.
>
> For example, in one reported case, the task invoking the OOM killer
> was about to charge a page cache page during a write(), which holds
> the i_mutex. The OOM killer selected a task that was just entering
> truncate() and trying to acquire the i_mutex:
>
> OOM invoking task:
> [<ffffffff8110a9c1>] mem_cgroup_handle_oom+0x241/0x3b0
> [<ffffffff8110b5ab>] T.1146+0x5ab/0x5c0
> [<ffffffff8110c22e>] mem_cgroup_cache_charge+0xbe/0xe0
> [<ffffffff810ca28c>] add_to_page_cache_locked+0x4c/0x140
> [<ffffffff810ca3a2>] add_to_page_cache_lru+0x22/0x50
> [<ffffffff810ca45b>] grab_cache_page_write_begin+0x8b/0xe0
> [<ffffffff81193a18>] ext3_write_begin+0x88/0x270
> [<ffffffff810c8fc6>] generic_file_buffered_write+0x116/0x290
> [<ffffffff810cb3cc>] __generic_file_aio_write+0x27c/0x480
> [<ffffffff810cb646>] generic_file_aio_write+0x76/0xf0 # takes ->i_mutex
> [<ffffffff8111156a>] do_sync_write+0xea/0x130
> [<ffffffff81112183>] vfs_write+0xf3/0x1f0
> [<ffffffff81112381>] sys_write+0x51/0x90
> [<ffffffff815b5926>] system_call_fastpath+0x18/0x1d
> [<ffffffffffffffff>] 0xffffffffffffffff
>
> OOM kill victim:
> [<ffffffff811109b8>] do_truncate+0x58/0xa0 # takes i_mutex
> [<ffffffff81121c90>] do_last+0x250/0xa30
> [<ffffffff81122547>] path_openat+0xd7/0x440
> [<ffffffff811229c9>] do_filp_open+0x49/0xa0
> [<ffffffff8110f7d6>] do_sys_open+0x106/0x240
> [<ffffffff8110f950>] sys_open+0x20/0x30
> [<ffffffff815b5926>] system_call_fastpath+0x18/0x1d
> [<ffffffffffffffff>] 0xffffffffffffffff
>
> The OOM handling task will retry the charge indefinitely while the OOM
> killed task is not releasing any resources.
>
> A similar scenario can happen when the kernel OOM killer for a memcg
> is disabled and a userspace task is in charge of resolving OOM
> situations. In this case, ALL tasks that enter the OOM path will be
> made to sleep on the OOM waitqueue and wait for userspace to free
> resources or increase the group's limit. But a userspace OOM handler
> is prone to deadlock itself on the locks held by the waiting tasks.
> For example one of the sleeping tasks may be stuck in a brk() call
> with the mmap_sem held for writing but the userspace handler, in order
> to pick an optimal victim, may need to read files from /proc/<pid>,
> which tries to acquire the same mmap_sem for reading and deadlocks.
>
> This patch changes the way tasks behave after detecting a memcg OOM
> and makes sure nobody loops or sleeps with locks held:
>
> 1. When OOMing in a user fault, invoke the OOM killer and restart the
> fault instead of looping on the charge attempt. This way, the OOM
> victim can not get stuck on locks the looping task may hold.
>
> 2. When OOMing in a user fault but somebody else is handling it
> (either the kernel OOM killer or a userspace handler), don't go to
> sleep in the charge context. Instead, remember the OOMing memcg in
> the task struct and then fully unwind the page fault stack with
> -ENOMEM. pagefault_out_of_memory() will then call back into the
> memcg code to check if the -ENOMEM came from the memcg, and then
> either put the task to sleep on the memcg's OOM waitqueue or just
> restart the fault. The OOM victim can no longer get stuck on any
> lock a sleeping task may hold.
>
> This relies on the memcg OOM killer only being enabled when an
> allocation failure will result in a call to pagefault_out_of_memory().
>
> While reworking the OOM routine, also remove a needless OOM waitqueue
> wakeup when invoking the killer. In addition to the wakeup implied in
> the kill signal delivery, only uncharges and limit increases, things
> that actually change the memory situation, should poke the waitqueue.
>
> Reported-by: Reported-by: azurIt <azurit@pobox.sk>
> Debugged-by: Michal Hocko <mhocko@suse.cz>
> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>

Looks good just one remark bellow.

[...]
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index 30ae46a..029a3a8 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
[...]
> @@ -2189,31 +2191,20 @@ static void memcg_oom_recover(struct mem_cgroup *memcg)
> }
>
> /*
> - * try to call OOM killer. returns false if we should exit memory-reclaim loop.
> + * try to call OOM killer
> */
> -static bool mem_cgroup_handle_oom(struct mem_cgroup *memcg, gfp_t mask,
> - int order)
> +static void mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int order)
> {
> - struct oom_wait_info owait;
> - bool locked, need_to_kill;
> + bool locked, need_to_kill = true;
>
> - owait.memcg = memcg;
> - owait.wait.flags = 0;
> - owait.wait.func = memcg_oom_wake_function;
> - owait.wait.private = current;
> - INIT_LIST_HEAD(&owait.wait.task_list);
> - need_to_kill = true;
> - mem_cgroup_mark_under_oom(memcg);

You are marking memcg under_oom only for the sleepers. So if we have
no sleepers then the memcg will never report it is under oom which
is a behavior change. On the other hand who-ever relies on under_oom
under such conditions (it would basically mean a busy loop reading
memory.oom_control) would be racy anyway so it is questionable it
matters at all. At least now when we do not have any active notification
that under_oom has changed.

Anyway, this shouldn't be a part of this patch so if you want it because
it saves a pointless hierarchy traversal then make it a separate patch
with explanation why the new behavior is still OK.

> + if (!current->memcg_oom.may_oom)
> + return;
> +
> + current->memcg_oom.in_memcg_oom = 1;
>
> /* At first, try to OOM lock hierarchy under memcg.*/
> spin_lock(&memcg_oom_lock);
> locked = mem_cgroup_oom_lock(memcg);
> - /*
> - * Even if signal_pending(), we can't quit charge() loop without
> - * accounting. So, UNINTERRUPTIBLE is appropriate. But SIGKILL
> - * under OOM is always welcomed, use TASK_KILLABLE here.
> - */
> - prepare_to_wait(&memcg_oom_waitq, &owait.wait, TASK_KILLABLE);
> if (!locked || memcg->oom_kill_disable)
> need_to_kill = false;
> if (locked)
> @@ -2221,24 +2212,100 @@ static bool mem_cgroup_handle_oom(struct mem_cgroup *memcg, gfp_t mask,
> spin_unlock(&memcg_oom_lock);
>
> if (need_to_kill) {
> - finish_wait(&memcg_oom_waitq, &owait.wait);
> mem_cgroup_out_of_memory(memcg, mask, order);
> } else {
> - schedule();
> - finish_wait(&memcg_oom_waitq, &owait.wait);
> + /*
> + * A system call can just return -ENOMEM, but if this
> + * is a page fault and somebody else is handling the
> + * OOM already, we need to sleep on the OOM waitqueue
> + * for this memcg until the situation is resolved.
> + * Which can take some time because it might be
> + * handled by a userspace task.
> + *
> + * However, this is the charge context, which means
> + * that we may sit on a large call stack and hold
> + * various filesystem locks, the mmap_sem etc. and we
> + * don't want the OOM handler to deadlock on them
> + * while we sit here and wait. Store the current OOM
> + * context in the task_struct, then return -ENOMEM.
> + * At the end of the page fault handler, with the
> + * stack unwound, pagefault_out_of_memory() will check
> + * back with us by calling
> + * mem_cgroup_oom_synchronize(), possibly putting the
> + * task to sleep.
> + */
> + mem_cgroup_mark_under_oom(memcg);
> + current->memcg_oom.wakeups = atomic_read(&memcg->oom_wakeups);
> + css_get(&memcg->css);
> + current->memcg_oom.wait_on_memcg = memcg;
> }
> - spin_lock(&memcg_oom_lock);
> - if (locked)
> +
> + if (locked) {
> + spin_lock(&memcg_oom_lock);
> mem_cgroup_oom_unlock(memcg);
> - memcg_wakeup_oom(memcg);
> - spin_unlock(&memcg_oom_lock);
> + /*
> + * Sleeping tasks might have been killed, make sure
> + * they get scheduled so they can exit.
> + */
> + if (need_to_kill)
> + memcg_oom_recover(memcg);
> + spin_unlock(&memcg_oom_lock);
> + }
> +}
>
> - mem_cgroup_unmark_under_oom(memcg);
[...]
--
Michal Hocko
SUSE Labs


\
 
 \ /
  Last update: 2013-07-26 17:01    [W:0.233 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site