Messages in this thread | | | Date | Fri, 26 Jul 2013 12:15:35 +0200 | From | "Arend van Spriel" <> | Subject | Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet |
| |
On 07/26/2013 12:13 PM, Arend van Spriel wrote: > On 07/26/2013 05:00 AM, Joel Fernandes wrote: >> On 07/25/2013 09:49 PM, Joel Fernandes wrote: >> >> [..] >> >>>> Can I get back on this topic. When USB and ethernet was working for me >>>> as stated above, I was not doing tftpboot. When I use tftpboot the >>>> images are obtained from the tftp server, but after kernel has started >>>> there is nothing in /sys/bus/usb/devices/. >>> >>> I quickly tried 3.11-rc2 + Roger's USB PHY clock patch on omap4-panda-es >>> and enabled following USB options: >>> >>> CONFIG_USB_MUSB_HDRC=y >>> CONFIG_USB_PHY=y >>> CONFIG_OMAP_USB2=y >>> CONFIG_OMAP_CONTROL_USB=y >>> CONFIG_USB_MUSB_OMAP2PLUS=y >>> CONFIG_MFD_OMAP_USB_HOST=y >>> CONFIG_USB_EHCI_HCD=y
Aaargh. Missing this one. Will retry.
>>> CONFIG_USB_OHCI_HCD=y >>> CONFIG_USB_EHCI_HCD_OMAP=y >> >> Sorry I missed saying I also set had to set CONFIG_NOP_USB_XCEIV=y > > Here are the results of the dutch jury ;-) > > [ 2.537109] HS USB OTG: no transceiver configured > [ 2.542541] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed > with status -517 > [ 2.542541] platform musb-hdrc.0.auto: Driver musb-hdrc requests > probe deferral > > I am surely missing something here. Either in device tree or .config. > > Regards, > Arend
| |