lkml.org 
[lkml]   [2013]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
Hi Arend,

On 07/25/2013 08:06 AM, Arend van Spriel wrote:
> On 07/18/2013 02:42 PM, Roger Quadros wrote:
>> On 07/18/2013 03:38 PM, Arend van Spriel wrote:
>>> On 07/18/2013 01:30 PM, Roger Quadros wrote:
>>>> On 07/18/2013 02:24 PM, Arend van Spriel wrote:
>>>>> On 07/18/2013 01:18 PM, Roger Quadros wrote:
>>>>>> Hi Arend,
>>>>>>
>>>>>> On 07/18/2013 11:41 AM, Arend van Spriel wrote:
>>>>>>> Hi Tony,
>>>>>>>
>>>>>>>
>>>>>>> We are using the panda board (es variant) for testing our SDIO
>>>>>>> based chips. For this we have an adapter card connection to
>>>>>>> expansion connector A. As this adapter is not publicly available
>>>>>>> we had internally patched board-omap4panda.c. Also we follow the
>>>>>>> -rc releases and use TFTP to boot the kernel image which requires
>>>>>>> USB.
>>>>>>>
>>>>>>> Moving to 3.11-rc1 I found that the mentioned board file was
>>>>>>> removed by your commit:
>>>>>>>
>>>>>>> commit b42b918194c4791510ac049e3d507169a7de8544
>>>>>>> Author: Tony Lindgren <tony@atomide.com>
>>>>>>> Date: Thu May 30 12:53:05 2013 -0700
>>>>>>>
>>>>>>> ARM: OMAP2+: Remove board-omap4panda.c
>>>>>>>
>>>>>>> As our patches on that file are internal I do not hold it against
>>>>>>> you. This is no regression and we need to fix it.
>>>>>>>
>>>>>>> So my first step was to follow the recipe given in that commit.
>>>>>>> Beside that I noticed a thread about USB issue on LKML so I also
>>>>>>> applied the following commit:
>>>>>>>
>>>>>>> commit 352f573e59050c7a604c35c58b4bbfc51edebbee
>>>>>>> Author: Roger Quadros <rogerq@ti.com>
>>>>>>> Date: Tue Jun 18 19:04:47 2013 +0300
>>>>>>>
>>>>>>> ARM: OMAP2+: Provide alias to USB PHY clock
>>>>>>>
>>>>>>> The attached kernel log seems to suggest that the device tree is
>>>>>>> picked up by the kernel, but the USB does not seem very active.
>>>>>>> No ethernet connectivity. This does seem a regression to me. Is
>>>>>>> there some other patch that I need to get it going again?
>>>>>>>
>>>>>>
>>>>>> I tried with your config and 3.11-rc1 kernel with the above commit
>>>>>> on top and ethernet seems to
>>>>>> work for me. My boot log is attached.
>>>>>>
>>>>>> Are you sure that you are building the DTB for panda-es and the
>>>>>> bootloader is picking up the right file and
>>>>>> not an outdated one?
>>>>>
>>>>> I appended the DTB to the kernel image thus avoiding the need to
>>>>> update u-boot (at least that is what I understood from Tony's commit).
>>>>>
>>>>
>>>> I understand this can be a little tedious at first.
>>>>
>>>> This is my u-boot boot.txt
>>>>
>>>> fatload mmc 0:1 0x825f0000 omap4-panda-es.dtb
>>>> fatload mmc 0:1 0x80300000 uImage
>>>> set fdt_high 0xffffffff
>>>> setenv bootargs console=ttyO2,115200n8 mem=1G@0x80000000
>>>> root=/dev/mmcblk0p2 rootwait
>>>> bootm 0x80300000 - 0x825f0000
>>>>
>>>> You need to generate boot.scr from the above boot.txt and place it
>>>> in SD card boot partition.
>>>>
>>>> mkimage -A arm -T script -C none -n "Boot Image" -d boot.txt boot.scr
>>>>
>>>> And of course copy the omap4-panda-es.dtb to SD card boot partition.
>>>>
>>>> hope this helps.
>>>
>>> Thanks for sharing this.
>>>
>>>>>> Why is the version of SPL loader and u-boot different in your log?
>>>>>> You need to use the MLO file generated by the u-boot build along
>>>>>> with the uImage.
>>>>>>
>>>>>> Just to be sure we are on the same setup could you please try with
>>>>>> latest u-boot release (2013-04). Thanks.
>>>>>
>>>>> I recall having difficulty with TFTP boot using a 2013 u-boot
>>>>> release, but that hurdle is for later. I will try.
>>>>>
>>>>
>>>> OK. We can figure this out as well.
>>>
>>> I tried with same SPL and u-boot version, but that did not work out.
>>> So I moved to v2013.04 and the log looks better. I was especially
>>> interested in this:
>>>
>>> [ 2.807434] usb 1-1.1: new high-speed USB device number 3 using
>>> ehci-omap
>>> [ 2.932495] usb 1-1.1: New USB device found, idVendor=0424,
>>> idProduct=ec00
>>> [ 2.932495] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
>>> SerialNumbe0
>>> [ 2.958770] smsc95xx v1.0.4
>>> Starting logging: OK
>>> Initializing random number generator... [ 3.045806] smsc95xx
>>> 1-1.1:1.0 eth0
>>
>> Cool! :).
>>
>> FYI. I also tested tftpboot from u-boot and NFS root file system and
>> it works fine.
>
> Hi Roger,
>
> Can I get back on this topic. When USB and ethernet was working for me
> as stated above, I was not doing tftpboot. When I use tftpboot the
> images are obtained from the tftp server, but after kernel has started
> there is nothing in /sys/bus/usb/devices/.

I quickly tried 3.11-rc2 + Roger's USB PHY clock patch on omap4-panda-es
and enabled following USB options:

CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_PHY=y
CONFIG_OMAP_USB2=y
CONFIG_OMAP_CONTROL_USB=y
CONFIG_USB_MUSB_OMAP2PLUS=y
CONFIG_MFD_OMAP_USB_HOST=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_EHCI_HCD_OMAP=y

With this I see both USB ports, and ethernet:

bash-4.2# ifconfig eth0
eth0 Link encap:Ethernet HWaddr BE:08:A9:74:3E:A0
inet addr:192.168.3.4 Bcast:192.168.3.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:842 (842.0 B) TX bytes:4724 (4.6 KiB)
bash-4.2# lsusb

Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.

bash-4.2# ls /sys/bus/usb/devices/
1-0:1.0 1-1 1-1.1 1-1.1:1.0 1-1:1.0 2-0:1.0 usb1
usb2

> I tried a 'usb stop' before booting the kernel, but that does not help
> either. As you stated to have tftpboot working, maybe you can help me.

I am tftp'ing kernel over USB network. I think U-boot shouldn't have
anything to do with Kernel USB though. If it does, then its a bug.

Hope this helps, Thanks,

-Joel


\
 
 \ /
  Last update: 2013-07-26 05:01    [W:0.132 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site