Messages in this thread | | | Date | Thu, 25 Jul 2013 06:00:25 +0000 (GMT) | From | Tarak Anumolu <> | Subject | Need help in using udev |
| |
Hi
My name is Tarak, working in Samsung-SouthKorea.
I got some problem in using udev, particulary in writing rules for network interfaces.
Following is the rule for my udev.
Every thing is working fine except the network interface.
My aim is to run network.sh script when the interface got connected/ disconnected.
Can anyone help me on this.
# Media automounting SUBSYSTEM=="block", ACTION=="add" RUN+="/etc/udev/scripts/mount.sh" SUBSYSTEM=="block", ACTION=="remove" RUN+="/etc/udev/scripts/mount.sh" # Added HDD/USB Storage Hotplug by BSP Team at 2013/2/18 KERNEL=="sd[a-z]", RUN+="/root/usb_hotplug.sh" KERNEL=="mouse0", RUN+="/root/mouse_hotplug.sh" # Handle network interface setup
#ACTION=="add", SUBSYSTEM=="net", SYSFS{address}=="00:09:18:30:97:02", RUN+="/root/network.sh" #ACTION=="remove", SUBSYSTEM=="net", SYSFS{address}=="00:09:18:30:97:02", RUN+="/root/network.sh"
# The first framebuffer is symlinked to /dev/fb KERNEL=="fb0", SYMLINK+="fb" # The first rtc device is symlinked to /dev/rtc KERNEL=="rtc0", SYMLINK+="rtc" # Try and modprobe for drivers for new hardware ACTION=="add", DEVPATH=="/devices/*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}" # Create a symlink to any touchscreen input device SUBSYSTEM=="input", KERNEL=="event[0-9]*", ATTRS{modalias}=="input:*-e0*,3,*a0,1,*18,*", SYMLINK+="input/touchscreen0"
Regards
Tarak Ramgopal Anumolu Security Solution Division SAMSUNG TECHWIN CO.,LTD
| |