lkml.org 
[lkml]   [2013]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND RFC PATCH 3/5] tools/include: Add jhash.h
Date
Copy include/linux/jhash.h to tools/include/tools/ for userland
tools. The original jhash.h includes a couple of header files
which is not suitable for userland. So unfold the only necessary
part in those header files to the copied jhash.h

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
---

tools/include/tools/jhash.h | 192 +++++++++++++++++++++++++++++++++++++++++++
1 files changed, 192 insertions(+), 0 deletions(-)
create mode 100644 tools/include/tools/jhash.h

diff --git a/tools/include/tools/jhash.h b/tools/include/tools/jhash.h
new file mode 100644
index 0000000..872d7f9
--- /dev/null
+++ b/tools/include/tools/jhash.h
@@ -0,0 +1,192 @@
+#ifndef _TOOLS_JHASH_H
+#define _TOOLS_JHASH_H
+
+/* jhash.h: Jenkins hash support.
+ *
+ * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net)
+ *
+ * http://burtleburtle.net/bob/hash/
+ *
+ * These are the credits from Bob's sources:
+ *
+ * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
+ *
+ * These are functions for producing 32-bit hashes for hash table lookup.
+ * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final()
+ * are externally useful functions. Routines to test the hash are included
+ * if SELF_TEST is defined. You can use this free for any purpose. It's in
+ * the public domain. It has no warranty.
+ *
+ * Copyright (C) 2009-2010 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
+ *
+ * I've modified Bob's hash to be useful in the Linux kernel, and
+ * any bugs present are my fault.
+ * Jozsef
+ */
+
+#define __packed __attribute__((packed))
+
+/*
+ * __get_unaligned_cpu32 was copied from
+ * include/linux/unaligned/packed_struct.h
+ */
+struct __una_u32 { u32 x; } __packed;
+static inline u32 __get_unaligned_cpu32(const void *p)
+{
+ const struct __una_u32 *ptr = (const struct __una_u32 *)p;
+ return ptr->x;
+}
+
+/* rol32 was copied from include/linux/bitops.h */
+/**
+ * rol32 - rotate a 32-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline u32 rol32(u32 word, unsigned int shift)
+{
+ return (word << shift) | (word >> (32 - shift));
+}
+
+/* Best hash sizes are of power of two */
+#define jhash_size(n) ((u32)1<<(n))
+/* Mask the hash value, i.e (value & jhash_mask(n)) instead of (value % n) */
+#define jhash_mask(n) (jhash_size(n)-1)
+
+/* __jhash_mix -- mix 3 32-bit values reversibly. */
+#define __jhash_mix(a, b, c) \
+{ \
+ a -= c; a ^= rol32(c, 4); c += b; \
+ b -= a; b ^= rol32(a, 6); a += c; \
+ c -= b; c ^= rol32(b, 8); b += a; \
+ a -= c; a ^= rol32(c, 16); c += b; \
+ b -= a; b ^= rol32(a, 19); a += c; \
+ c -= b; c ^= rol32(b, 4); b += a; \
+}
+
+/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
+#define __jhash_final(a, b, c) \
+{ \
+ c ^= b; c -= rol32(b, 14); \
+ a ^= c; a -= rol32(c, 11); \
+ b ^= a; b -= rol32(a, 25); \
+ c ^= b; c -= rol32(b, 16); \
+ a ^= c; a -= rol32(c, 4); \
+ b ^= a; b -= rol32(a, 14); \
+ c ^= b; c -= rol32(b, 24); \
+}
+
+/* An arbitrary initial parameter */
+#define JHASH_INITVAL 0xdeadbeef
+
+/* jhash - hash an arbitrary key
+ * @k: sequence of bytes as key
+ * @length: the length of the key
+ * @initval: the previous hash, or an arbitray value
+ *
+ * The generic version, hashes an arbitrary sequence of bytes.
+ * No alignment or length assumptions are made about the input key.
+ *
+ * Returns the hash value of the key. The result depends on endianness.
+ */
+static inline u32 jhash(const void *key, u32 length, u32 initval)
+{
+ u32 a, b, c;
+ const u8 *k = key;
+
+ /* Set up the internal state */
+ a = b = c = JHASH_INITVAL + length + initval;
+
+ /* All but the last block: affect some 32 bits of (a,b,c) */
+ while (length > 12) {
+ a += __get_unaligned_cpu32(k);
+ b += __get_unaligned_cpu32(k + 4);
+ c += __get_unaligned_cpu32(k + 8);
+ __jhash_mix(a, b, c);
+ length -= 12;
+ k += 12;
+ }
+ /* Last block: affect all 32 bits of (c) */
+ /* All the case statements fall through */
+ switch (length) {
+ case 12: c += (u32)k[11]<<24;
+ case 11: c += (u32)k[10]<<16;
+ case 10: c += (u32)k[9]<<8;
+ case 9: c += k[8];
+ case 8: b += (u32)k[7]<<24;
+ case 7: b += (u32)k[6]<<16;
+ case 6: b += (u32)k[5]<<8;
+ case 5: b += k[4];
+ case 4: a += (u32)k[3]<<24;
+ case 3: a += (u32)k[2]<<16;
+ case 2: a += (u32)k[1]<<8;
+ case 1: a += k[0];
+ __jhash_final(a, b, c);
+ case 0: /* Nothing left to add */
+ break;
+ }
+
+ return c;
+}
+
+/* jhash2 - hash an array of u32's
+ * @k: the key which must be an array of u32's
+ * @length: the number of u32's in the key
+ * @initval: the previous hash, or an arbitray value
+ *
+ * Returns the hash value of the key.
+ */
+static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
+{
+ u32 a, b, c;
+
+ /* Set up the internal state */
+ a = b = c = JHASH_INITVAL + (length<<2) + initval;
+
+ /* Handle most of the key */
+ while (length > 3) {
+ a += k[0];
+ b += k[1];
+ c += k[2];
+ __jhash_mix(a, b, c);
+ length -= 3;
+ k += 3;
+ }
+
+ /* Handle the last 3 u32's: all the case statements fall through */
+ switch (length) {
+ case 3: c += k[2];
+ case 2: b += k[1];
+ case 1: a += k[0];
+ __jhash_final(a, b, c);
+ case 0: /* Nothing left to add */
+ break;
+ }
+
+ return c;
+}
+
+
+/* jhash_3words - hash exactly 3, 2 or 1 word(s) */
+static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
+{
+ a += JHASH_INITVAL;
+ b += JHASH_INITVAL;
+ c += initval;
+
+ __jhash_final(a, b, c);
+
+ return c;
+}
+
+static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
+{
+ return jhash_3words(a, b, 0, initval);
+}
+
+static inline u32 jhash_1word(u32 a, u32 initval)
+{
+ return jhash_3words(a, 0, 0, initval);
+}
+
+#endif /* _TOOLS_JHASH_H */



\
 
 \ /
  Last update: 2013-07-25 11:41    [W:0.086 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site