lkml.org 
[lkml]   [2013]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC ebeam PATCH 0/2] new USB eBeam input driver
Date
Hi,

New USB input driver for eBeam devices.

Currently supported (tested) :
- Luidia eBeam classic projection and edge projection models
- Nec "interactive solution" NP01Wi1 & NP01Wi2 accessories.

From basic usb point of view, all these devices are
indistinguishable : they have the same usb ids and (blank) hid
report descriptors. There's other re-branded hardware that need to be
test, but i bet on same ids.

Patch 1 to blacklist the devices for hid generic-usb.

Patch 2 is the actual driver.

Notable stuff :
- use div64_s64 for portable 64/64-bits divisions.
- 13 sysfs custom files : 9 values for the transformation matrix,
4 for xy ranges and a calibration trigger.

The module run fine since 3.3.6 kernel, both x86_32 and 64, actually
run in production on a 3.8.13 and compile without errors on
today's linus tree.

Side note :
- This driver was first submit and discuss last year.

Thanks for your help.



\
 
 \ /
  Last update: 2013-07-25 02:21    [W:0.031 / U:9.000 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site