lkml.org 
[lkml]   [2013]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] pinctrl: msm: Add support for MSM TLMM pinmux
Date
Add a new device tree enabled pinctrl driver for
Qualcomm MSM SoC's. This driver provides an extensible
framework to interface all MSM's that use a TLMM pinmux,
with the pinctrl subsytem.

This driver is split into two parts: the pinctrl interface
and the TLMM version specific implementation. The pinctrl
interface parses the device tree and registers with the pinctrl
subsytem. The TLMM version specific implementation supports
pin configuration/register programming for the different
pin types present on a given TLMM pinmux version.

Add support only for TLMM version 3 pinmux right now,
as well as, only two of the different pin types present on the
TLMM v3 pinmux.
Pintype 1: General purpose pins.
Pintype 2: SDC pins.

Change-Id: I065d874cd2c6fd002d5b3cb4b355445bb6912bf4
---
.../devicetree/bindings/pinctrl/msm-pinctrl.txt | 184 ++++++
drivers/pinctrl/Kconfig | 10 +
drivers/pinctrl/Makefile | 2 +
drivers/pinctrl/pinctrl-msm-tlmm-v3.c | 330 ++++++++++
drivers/pinctrl/pinctrl-msm.c | 724 +++++++++++++++++++++
drivers/pinctrl/pinctrl-msm.h | 97 +++
6 files changed, 1347 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/msm-pinctrl.txt
create mode 100644 drivers/pinctrl/pinctrl-msm-tlmm-v3.c
create mode 100644 drivers/pinctrl/pinctrl-msm.c
create mode 100644 drivers/pinctrl/pinctrl-msm.h

diff --git a/Documentation/devicetree/bindings/pinctrl/msm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/msm-pinctrl.txt
new file mode 100644
index 0000000..0f17a94
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/msm-pinctrl.txt
@@ -0,0 +1,184 @@
+MSM TLMM pinmux controller
+
+Qualcomm MSM integrates a GPIO and Pin mux/config hardware, (TOP Level Mode
+Multiplexper in short TLMM). It controls the input/output settings on the
+available pads/pins and also provides ability to multiplex and configure the
+output of various on-chip controllers onto these pads. The pins are also of
+different types, encapsulating different functions and having differing register
+semantics.
+
+Required Properties:
+- compatible: should be one of the following.
+ - "qcom,msm-tlmm-v3": for MSM with TLMM version 3.
+
+- reg: Base address of the pin controller hardware module and length of
+ the address space it occupies.
+
+- Pin types as child nodes: Pin types supported by a particular controller
+ instance are represented as child nodes of the controller node. Each
+ pin type node must contain following properties:
+
+Required Properties
+ - qcom,pin-type-*: identifies the pin type. Pin types supported are
+ qcom,pin-type-gp (General purpose)
+ qcom,pin-type-sdc (SDC)
+ - qcom,pin-cells: number of cells in the pin type specifier.
+ - qcom,num-pins: number of pins of given type present on the MSM.
+
+- Pin groups as child nodes: The pin mux (selecting pin function
+ mode) and pin config (pull up/down, driver strength, direction) settings are
+ represented as child nodes of the pin-controller node. There is no limit on
+ the count of these child nodes.
+
+ Required Properties
+ -qcom,pins: phandle specifying pin type and a pin number.
+ -qcom,num-grp-pins: number of pins in the group.
+ -label: name to to identify the pin group.
+
+ Optional Properties
+ -qcom,pin-func: function setting for the pin group.
+
+ The child node should contain a list of pin(s) on which a particular pin
+ function selection or pin configuration (or both) have to applied. This
+ list of pins is specified using the property name "qcom,pins". There
+ should be atleast one pin specfied for this property and there is no upper
+ limit on the count of pins that can be specified. The pins are specified
+ using the pintype phandle and the pin number within that pintype.
+
+ The pin function selection that should be applied on the pins listed in the
+ child node is specified using the "qcom,pin-func" property. The value
+ of this property that should be applied to each of the pins listed in the
+ "qcom,pins" property, should be picked from the hardware manual of the SoC.
+ This property is optional in the child node if no specific function
+ selection is desired for the pins listed in the child node or if the pin is
+ to be used for bit bang.
+
+ The pin group node must additionally have a pin configuration node as its own
+ child node. There can be more then one such configuration node for a pin group
+ node. There can be one or more configurations within the configuration
+ node. These configurations are applied to all pins mentoned above using the
+ "qcom,pins" property. These configurations are specific to the pintype of the
+ pins.
+ For the pin configuration properties supported by general purpose pins as well
+ as SDC pins lookup Documentation/devicetree/bindings/pinctrl-bindings.txt
+
+ The values specified by these config properties should be derived from the
+ hardware manual and these values are programmed as-is into the pin config
+ register of the pin-controller.
+
+ NOTE: A pin group node should be formed for all pins that are going to have
+ the same function and configuration settings. If a subset of pins to be used
+ by a client require different function or configuration settings or both
+ then they should be modelled as a separate pin group node to be used by
+ the client.
+
+ The client nodes that require a particular pin function selection and/or
+ pin configuration should use the bindings listed in the "pinctrl-bindings txt"
+ file.
+
+Example 1: A pin-controller node with pin types
+
+ pinctrl@fd5110000 {
+ compatible = "qcom,msm-tlmm-v3";
+ reg = <0xfd5110000 0x4000>;
+
+ /* General purpose pin type */
+ gp: gp {
+ qcom,pin-type-gp;
+ qcom,num-pins = <117>;
+ #qcom,pin-cells = <1>;
+ };
+ };
+
+Example 2: Spi pin entries within the pincontroller node
+ pinctrl@fd511000 {
+ ....
+ ..
+ pmx-spi-bus {
+ /*
+ * MOSI, MISO and CLK lines
+ * all sharing same function and config
+ * settings for each configuration node.
+ */
+ qcom,pins = <&gp 0>, <&gp 1>, <&gp 3>;
+ qcom,num-grp-pins = <3>;
+ qcom,pin-func = <1>;
+ label = "spi-bus";
+
+ /* Active configuration of bus pins */
+ spi-bus-active: spi-bus-active {
+ /*
+ * Property names as specified in
+ * pinctrl-bindings.txt
+ */
+ drive-strength = <8>; /* 8 MA */
+ bias-disable; /* No PULL */
+ };
+ /* Sleep configuration of bus pins */
+ spi-bus-sleep: spi-bus-sleep {
+ /*
+ * Property values as specified in HW
+ * manual.
+ */
+ drive-strength = <2>; /* 2 MA */
+ bias-disable;
+ };
+ };
+
+ pmx-spi-cs {
+ /*
+ * Chip select for SPI
+ * different config
+ * settings as compared to bus pins.
+ */
+ qcom,pins = <&Gp 2>;
+ qcom,num-grp-pins = <1>;
+ qcom,pin-func = <1>;
+ label = "spi-cs"
+
+ /* Active configuration of cs pin */
+ spi-cs-active: spi-cs-active {
+ /*
+ * Property names as specified in
+ * pinctrl-bindings.txt
+ */
+ drive-strength = <4>; /* 4 MA */
+ bias-disable; /* No PULL */
+ };
+ /* Sleep configuration of cs pin */
+ spi-bus-sleep: spi-bus-sleep {
+ /*
+ * Property values as specified in HW
+ * manual.
+ */
+ drive-strength = <2>; /* 2 MA */
+ bias-disable = <0>; /* No PULL */
+ };
+ };
+ };
+
+Example 3: A SPI client node that supports 'active' and 'sleep' states.
+
+ spi_0: spi@f9923000 { /* BLSP1 QUP1 */
+ compatible = "qcom,spi-qup-v2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "spi_physical", "spi_bam_physical";
+ reg = <0xf9923000 0x1000>,
+ <0xf9904000 0xF000>;
+ interrupt-names = "spi_irq", "spi_bam_irq";
+ interrupts = <0 95 0>, <0 238 0>;
+ spi-max-frequency = <19200000>;
+
+ /* pins used by spi controllers */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi-bus-active &spi-cs-active>;
+ pinctrl-1 = <&spi-bus-sleep &spi-cs-sleep>;
+
+ qcom,infinite-mode = <0>;
+ qcom,use-bam;
+ qcom,ver-reg-exists;
+ qcom,bam-consumer-pipe-index = <12>;
+ qcom,bam-producer-pipe-index = <13>;
+ };
+
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 34f51d2..480cb26 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -133,6 +133,16 @@ config PINCTRL_IMX28
bool
select PINCTRL_MXS

+config PINCTRL_MSM
+ depends on OF
+ bool
+ select PINMUX
+ select GENERIC_PINCONF
+
+config PINCTRL_MSM_TLMM_V3
+ bool
+ select PINCTRL_MSM
+
config PINCTRL_NOMADIK
bool "Nomadik pin controller driver"
depends on ARCH_U8500 || ARCH_NOMADIK
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f82cc5b..3cf8fba 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -27,6 +27,8 @@ obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o
obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o
obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o
obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o
+obj-$(CONFIG_PINCTRL_MSM) += pinctrl-msm.o
+obj-$(CONFIG_PINCTRL_MSM_TLMM_V3) += pinctrl-msm-tlmm-v3.o
obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o
obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o
obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o
diff --git a/drivers/pinctrl/pinctrl-msm-tlmm-v3.c b/drivers/pinctrl/pinctrl-msm-tlmm-v3.c
new file mode 100644
index 0000000..47b50f8
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-msm-tlmm-v3.c
@@ -0,0 +1,330 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include "pinctrl-msm.h"
+
+/* config translations */
+#define drv_str_to_rval(drv) ((drv >> 1) - 1)
+#define rval_to_drv_str(val) ((val + 1) << 1)
+#define dir_to_inout_val(dir) (dir << 1)
+#define inout_val_to_dir(val) (val >> 1)
+#define rval_to_pull(val) ((val > 2) ? 1 : val)
+#define TLMMV3_NO_PULL 0
+#define TLMMV3_PULL_DOWN 1
+#define TLMMV3_PULL_UP 3
+/* GP PIN TYPE REG MASKS */
+#define TLMMV3_GP_DRV_SHFT 6
+#define TLMMV3_GP_DRV_MASK 0x7
+#define TLMMV3_GP_PULL_SHFT 0
+#define TLMMV3_GP_PULL_MASK 0x3
+#define TLMMV3_GP_DIR_SHFT 9
+#define TLMMV3_GP_DIR_MASK 1
+#define TLMMV3_GP_FUNC_SHFT 2
+#define TLMMV3_GP_FUNC_MASK 0xF
+/* SDC1 PIN TYPE REG MASKS */
+#define TLMMV3_SDC1_CLK_DRV_SHFT 6
+#define TLMMV3_SDC1_CLK_DRV_MASK 0x7
+#define TLMMV3_SDC1_DATA_DRV_SHFT 0
+#define TLMMV3_SDC1_DATA_DRV_MASK 0x7
+#define TLMMV3_SDC1_CMD_DRV_SHFT 3
+#define TLMMV3_SDC1_CMD_DRV_MASK 0x7
+#define TLMMV3_SDC1_CLK_PULL_SHFT 13
+#define TLMMV3_SDC1_CLK_PULL_MASK 0x3
+#define TLMMV3_SDC1_DATA_PULL_SHFT 9
+#define TLMMV3_SDC1_DATA_PULL_MASK 0x3
+#define TLMMV3_SDC1_CMD_PULL_SHFT 11
+#define TLMMV3_SDC1_CMD_PULL_MASK 0x3
+/* SDC2 PIN TYPE REG MASKS */
+#define TLMMV3_SDC2_CLK_DRV_SHFT 6
+#define TLMMV3_SDC2_CLK_DRV_MASK 0x7
+#define TLMMV3_SDC2_DATA_DRV_SHFT 0
+#define TLMMV3_SDC2_DATA_DRV_MASK 0x7
+#define TLMMV3_SDC2_CMD_DRV_SHFT 3
+#define TLMMV3_SDC2_CMD_DRV_MASK 0x7
+#define TLMMV3_SDC2_CLK_PULL_SHFT 14
+#define TLMMV3_SDC2_CLK_PULL_MASK 0x3
+#define TLMMV3_SDC2_DATA_PULL_SHFT 9
+#define TLMMV3_SDC2_DATA_PULL_MASK 0x3
+#define TLMMV3_SDC2_CMD_PULL_SHFT 11
+#define TLMMV3_SDC2_CMD_PULL_MASK 0x3
+
+#define TLMMV3_GP_INOUT_BIT 1
+#define TLMMV3_GP_OUT BIT(TLMMV3_GP_INOUT_BIT)
+#define TLMMV3_GP_IN 0
+
+/* SDC Pin type register offsets */
+#define TLMMV3_SDC_OFFSET 0x2044
+#define TLMMV3_SDC1_CFG(base) (base)
+#define TLMMV3_SDC2_CFG(base) (TLMMV3_SDC1_CFG(base) + 0x4)
+
+/* GP pin type register offsets */
+#define TLMMV3_GP_CFG(base, pin) (base + 0x1000 + 0x10 * (pin))
+#define TLMMV3_GP_INOUT(base, pin) (base + 0x1004 + 0x10 * (pin))
+
+struct msm_sdc_regs {
+ unsigned int offset;
+ unsigned long pull_mask;
+ unsigned long pull_shft;
+ unsigned long drv_mask;
+ unsigned long drv_shft;
+};
+
+static struct msm_sdc_regs sdc_regs[] = {
+ /* SDC1 CLK */
+ {
+ .offset = 0,
+ .pull_mask = TLMMV3_SDC1_CLK_PULL_MASK,
+ .pull_shft = TLMMV3_SDC1_CLK_PULL_SHFT,
+ .drv_mask = TLMMV3_SDC1_CLK_DRV_MASK,
+ .drv_shft = TLMMV3_SDC1_CLK_DRV_SHFT,
+ },
+ /* SDC1 CMD */
+ {
+ .offset = 0,
+ .pull_mask = TLMMV3_SDC1_CMD_PULL_MASK,
+ .pull_shft = TLMMV3_SDC1_CMD_PULL_SHFT,
+ .drv_mask = TLMMV3_SDC1_CMD_DRV_MASK,
+ .drv_shft = TLMMV3_SDC1_CMD_DRV_SHFT,
+ },
+ /* SDC1 DATA */
+ {
+ .offset = 0,
+ .pull_mask = TLMMV3_SDC1_DATA_PULL_MASK,
+ .pull_shft = TLMMV3_SDC1_DATA_PULL_SHFT,
+ .drv_mask = TLMMV3_SDC1_DATA_DRV_MASK,
+ .drv_shft = TLMMV3_SDC1_DATA_DRV_SHFT,
+ },
+ /* SDC2 CLK */
+ {
+ .offset = 0x4,
+ .pull_mask = TLMMV3_SDC2_CLK_PULL_MASK,
+ .pull_shft = TLMMV3_SDC2_CLK_PULL_SHFT,
+ .drv_mask = TLMMV3_SDC2_CLK_DRV_MASK,
+ .drv_shft = TLMMV3_SDC2_CLK_DRV_SHFT,
+ },
+ /* SDC2 CMD */
+ {
+ .offset = 0x4,
+ .pull_mask = TLMMV3_SDC2_CMD_PULL_MASK,
+ .pull_shft = TLMMV3_SDC2_CMD_PULL_SHFT,
+ .drv_mask = TLMMV3_SDC2_CMD_DRV_MASK,
+ .drv_shft = TLMMV3_SDC2_CMD_DRV_SHFT,
+ },
+ /* SDC2 DATA */
+ {
+ .offset = 0x4,
+ .pull_mask = TLMMV3_SDC2_DATA_PULL_MASK,
+ .pull_shft = TLMMV3_SDC2_DATA_PULL_SHFT,
+ .drv_mask = TLMMV3_SDC2_DATA_DRV_MASK,
+ .drv_shft = TLMMV3_SDC2_DATA_DRV_SHFT,
+ },
+};
+
+static int msm_tlmm_v3_sdc_cfg(uint pin_no, unsigned long *config,
+ void __iomem *reg_base,
+ bool write)
+{
+ unsigned int val, id, data;
+ u32 mask, shft;
+ void __iomem *cfg_reg;
+
+ cfg_reg = reg_base + sdc_regs[pin_no].offset;
+ id = pinconf_to_config_param(*config);
+ val = readl_relaxed(cfg_reg);
+ /* Get mask and shft values for this config type */
+ switch (id) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ mask = sdc_regs[pin_no].pull_mask;
+ shft = sdc_regs[pin_no].pull_shft;
+ data = TLMMV3_NO_PULL;
+ if (!write) {
+ val >>= shft;
+ val &= mask;
+ data = rval_to_pull(val);
+ }
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ mask = sdc_regs[pin_no].pull_mask;
+ shft = sdc_regs[pin_no].pull_shft;
+ data = TLMMV3_PULL_DOWN;
+ if (!write) {
+ val >>= shft;
+ val &= mask;
+ data = rval_to_pull(val);
+ }
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ mask = sdc_regs[pin_no].pull_mask;
+ shft = sdc_regs[pin_no].pull_shft;
+ data = TLMMV3_PULL_UP;
+ if (!write) {
+ val >>= shft;
+ val &= mask;
+ data = rval_to_pull(val);
+ }
+ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ mask = sdc_regs[pin_no].drv_mask;
+ shft = sdc_regs[pin_no].drv_shft;
+ if (write) {
+ data = pinconf_to_config_argument(*config);
+ data = drv_str_to_rval(data);
+ } else {
+ val >>= shft;
+ val &= mask;
+ data = rval_to_drv_str(val);
+ }
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ if (write) {
+ val &= ~(mask << shft);
+ val |= (data << shft);
+ writel_relaxed(val, cfg_reg);
+ } else
+ *config = pinconf_to_config_packed(id, data);
+ return 0;
+}
+
+static void msm_tlmm_v3_sdc_set_reg_base(void __iomem **ptype_base,
+ void __iomem *tlmm_base)
+{
+ *ptype_base = tlmm_base + TLMMV3_SDC_OFFSET;
+}
+
+static int msm_tlmm_v3_gp_cfg(uint pin_no, unsigned long *config,
+ void *reg_base, bool write)
+{
+ unsigned int val, id, data, inout_val;
+ u32 mask = 0, shft = 0;
+ void __iomem *inout_reg = NULL;
+ void __iomem *cfg_reg = TLMMV3_GP_CFG(reg_base, pin_no);
+
+ id = pinconf_to_config_param(*config);
+ val = readl_relaxed(cfg_reg);
+ /* Get mask and shft values for this config type */
+ switch (id) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ mask = TLMMV3_GP_PULL_MASK;
+ shft = TLMMV3_GP_PULL_SHFT;
+ data = TLMMV3_NO_PULL;
+ if (!write) {
+ val >>= shft;
+ val &= mask;
+ data = rval_to_pull(val);
+ }
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ mask = TLMMV3_GP_PULL_MASK;
+ shft = TLMMV3_GP_PULL_SHFT;
+ data = TLMMV3_PULL_DOWN;
+ if (!write) {
+ val >>= shft;
+ val &= mask;
+ data = rval_to_pull(val);
+ }
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ mask = TLMMV3_GP_PULL_MASK;
+ shft = TLMMV3_GP_PULL_SHFT;
+ data = TLMMV3_PULL_UP;
+ if (!write) {
+ val >>= shft;
+ val &= mask;
+ data = rval_to_pull(val);
+ }
+ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ mask = TLMMV3_GP_DRV_MASK;
+ shft = TLMMV3_GP_DRV_SHFT;
+ if (write) {
+ data = pinconf_to_config_argument(*config);
+ data = drv_str_to_rval(data);
+ } else {
+ val >>= shft;
+ val &= mask;
+ data = rval_to_drv_str(val);
+ }
+ break;
+ case PIN_CONFIG_OUTPUT:
+ mask = TLMMV3_GP_DIR_MASK;
+ shft = TLMMV3_GP_DIR_SHFT;
+ inout_reg = TLMMV3_GP_INOUT(reg_base, pin_no);
+ if (write) {
+ data = pinconf_to_config_argument(*config);
+ inout_val = dir_to_inout_val(data);
+ writel_relaxed(inout_val, inout_reg);
+ data = (mask << shft);
+ } else {
+ inout_val = readl_relaxed(inout_reg);
+ data = inout_val_to_dir(inout_val);
+ }
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ if (write) {
+ val &= ~(mask << shft);
+ val |= (data << shft);
+ writel_relaxed(val, cfg_reg);
+ } else
+ *config = pinconf_to_config_packed(id, data);
+ return 0;
+}
+
+static void msm_tlmm_v3_gp_fn(uint pin_no, u32 func, void *reg_base,
+ bool enable)
+{
+ unsigned int val;
+ void __iomem *cfg_reg = TLMMV3_GP_CFG(reg_base, pin_no);
+ val = readl_relaxed(cfg_reg);
+ val &= ~(TLMMV3_GP_FUNC_MASK << TLMMV3_GP_FUNC_SHFT);
+ if (enable)
+ val |= (func << TLMMV3_GP_FUNC_SHFT);
+ writel_relaxed(val, cfg_reg);
+}
+
+static void msm_tlmm_v3_gp_set_reg_base(void __iomem **ptype_base,
+ void __iomem *tlmm_base)
+{
+ *ptype_base = tlmm_base;
+}
+
+static struct msm_pintype_info tlmm_v3_pininfo[] = {
+ {
+ .prg_cfg = msm_tlmm_v3_gp_cfg,
+ .prg_func = msm_tlmm_v3_gp_fn,
+ .set_reg_base = msm_tlmm_v3_gp_set_reg_base,
+ .reg_data = NULL,
+ .prop_name = "qcom,pin-type-gp",
+ .name = "gp",
+ },
+ {
+ .prg_cfg = msm_tlmm_v3_sdc_cfg,
+ .set_reg_base = msm_tlmm_v3_sdc_set_reg_base,
+ .reg_data = NULL,
+ .prop_name = "qcom,pin-type-sdc",
+ .name = "sdc",
+ }
+};
+
+struct msm_tlmm tlmm_v3_pintypes = {
+ .num_entries = ARRAY_SIZE(tlmm_v3_pininfo),
+ .pintype_info = tlmm_v3_pininfo,
+};
+
diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
new file mode 100644
index 0000000..11671b49
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-msm.c
@@ -0,0 +1,724 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include "core.h"
+#include "pinconf.h"
+#include "pinctrl-msm.h"
+
+/**
+ * struct msm_pinctrl_dd: represents the pinctrol driver data.
+ * @base: virtual base of TLMM.
+ * @irq: interrupt number for TLMM summary interrupt.
+ * @num_pins: Number of total pins present on TLMM.
+ * @msm_pindesc: list of descriptors for each pin.
+ * @num_pintypes: number of pintypes on TLMM.
+ * @msm_pintype: points to the representation of all pin types supported.
+ * @pctl: pin controller instance managed by the driver.
+ * @pctl_dev: pin controller descriptor registered with the pinctrl subsystem.
+ * @pin_grps: list of pin groups available to the driver.
+ * @num_grps: number of groups.
+ * @pmx_funcs:list of pin functions available to the driver
+ * @num_funcs: number of functions.
+ * @dev: pin contol device.
+ */
+struct msm_pinctrl_dd {
+ void __iomem *base;
+ int irq;
+ unsigned int num_pins;
+ struct msm_pindesc *msm_pindesc;
+ unsigned int num_pintypes;
+ struct msm_pintype_info *msm_pintype;
+ struct pinctrl_desc pctl;
+ struct pinctrl_dev *pctl_dev;
+ struct msm_pin_grps *pin_grps;
+ unsigned int num_grps;
+ struct msm_pmx_funcs *pmx_funcs;
+ unsigned int num_funcs;
+ struct device *dev;
+};
+
+static int msm_pmx_functions_count(struct pinctrl_dev *pctldev)
+{
+ struct msm_pinctrl_dd *dd;
+
+ dd = pinctrl_dev_get_drvdata(pctldev);
+ return dd->num_funcs;
+}
+
+static const char *msm_pmx_get_fname(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct msm_pinctrl_dd *dd;
+
+ dd = pinctrl_dev_get_drvdata(pctldev);
+ return dd->pmx_funcs[selector].name;
+}
+
+static int msm_pmx_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector, const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct msm_pinctrl_dd *dd;
+
+ dd = pinctrl_dev_get_drvdata(pctldev);
+ *groups = dd->pmx_funcs[selector].gps;
+ *num_groups = dd->pmx_funcs[selector].num_grps;
+ return 0;
+}
+
+static void msm_pmx_prg_fn(struct pinctrl_dev *pctldev, unsigned selector,
+ unsigned group, bool enable)
+{
+ struct msm_pinctrl_dd *dd;
+ const unsigned int *pins;
+ struct msm_pindesc *pindesc;
+ struct msm_pintype_info *pintype;
+ unsigned int pin, cnt, func;
+
+ dd = pinctrl_dev_get_drvdata(pctldev);
+ pins = dd->pin_grps[group].pins;
+ pindesc = dd->msm_pindesc;
+
+ /*
+ * for each pin in the pin group selected, program the correspoding
+ * pin function number in the config register.
+ */
+ for (cnt = 0; cnt < dd->pin_grps[group].num_pins; cnt++) {
+ pin = pins[cnt];
+ /* Obtain the pin type for given pin */
+ pintype = pindesc[pin].pin_info;
+ /* Obtain the pin number within the pin type */
+ pin = pin - pintype->pin_start;
+ func = dd->pin_grps[group].func;
+ /* program the function value for the given pin type */
+ pintype->prg_func(pin, func, pintype->reg_data, enable);
+ }
+}
+
+static int msm_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
+ unsigned group)
+{
+ msm_pmx_prg_fn(pctldev, selector, group, true);
+ return 0;
+}
+
+static void msm_pmx_disable(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ msm_pmx_prg_fn(pctldev, selector, group, false);
+}
+
+static struct pinmux_ops msm_pmxops = {
+ .get_functions_count = msm_pmx_functions_count,
+ .get_function_name = msm_pmx_get_fname,
+ .get_function_groups = msm_pmx_get_groups,
+ .enable = msm_pmx_enable,
+ .disable = msm_pmx_disable,
+};
+
+static int msm_pconf_prg(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *config, bool rw)
+{
+ struct msm_pinctrl_dd *dd;
+ struct msm_pindesc *pindesc;
+ struct msm_pintype_info *pintype;
+
+ dd = pinctrl_dev_get_drvdata(pctldev);
+ pindesc = dd->msm_pindesc;
+ /* Get pin type for given pin */
+ pintype = pindesc[pin].pin_info;
+ /* Get pin offset from the pintype start pin number */
+ pin = pin - pintype->pin_start;
+ /* Program the config value for pin type */
+ return pintype->prg_cfg(pin, config, pintype->reg_data, rw);
+}
+
+static int msm_pconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long config)
+{
+ return msm_pconf_prg(pctldev, pin, &config, true);
+}
+
+static int msm_pconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *config)
+{
+ return msm_pconf_prg(pctldev, pin, config, false);
+}
+
+static int msm_pconf_group_set(struct pinctrl_dev *pctldev,
+ unsigned group, unsigned long config)
+{
+ struct msm_pinctrl_dd *dd;
+ const unsigned int *pins;
+ unsigned int cnt;
+
+ dd = pinctrl_dev_get_drvdata(pctldev);
+ pins = dd->pin_grps[group].pins;
+
+ for (cnt = 0; cnt < dd->pin_grps[group].num_pins; cnt++)
+ msm_pconf_set(pctldev, pins[cnt], config);
+
+ return 0;
+}
+
+static int msm_pconf_group_get(struct pinctrl_dev *pctldev,
+ unsigned int group, unsigned long *config)
+{
+ struct msm_pinctrl_dd *dd;
+ const unsigned int *pins;
+
+ dd = pinctrl_dev_get_drvdata(pctldev);
+ pins = dd->pin_grps[group].pins;
+ msm_pconf_get(pctldev, pins[0], config);
+ return 0;
+}
+
+static struct pinconf_ops msm_pconfops = {
+ .pin_config_get = msm_pconf_get,
+ .pin_config_set = msm_pconf_set,
+ .pin_config_group_get = msm_pconf_group_get,
+ .pin_config_group_set = msm_pconf_group_set,
+};
+
+static int msm_get_grps_count(struct pinctrl_dev *pctldev)
+{
+ struct msm_pinctrl_dd *dd;
+
+ dd = pinctrl_dev_get_drvdata(pctldev);
+ return dd->num_grps;
+}
+
+static const char *msm_get_grps_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct msm_pinctrl_dd *dd;
+
+ dd = pinctrl_dev_get_drvdata(pctldev);
+ return dd->pin_grps[selector].name;
+}
+
+static int msm_get_grps_pins(struct pinctrl_dev *pctldev,
+ unsigned selector, const unsigned **pins, unsigned *num_pins)
+{
+ struct msm_pinctrl_dd *dd;
+
+ dd = pinctrl_dev_get_drvdata(pctldev);
+ *pins = dd->pin_grps[selector].pins;
+ *num_pins = dd->pin_grps[selector].num_pins;
+ return 0;
+}
+
+static struct msm_pintype_info *msm_pgrp_to_pintype(struct device_node *nd,
+ struct msm_pinctrl_dd *dd)
+{
+ struct device_node *ptype_nd;
+ struct msm_pintype_info *pinfo = NULL;
+ int idx = 0;
+
+ /*Extract pin type node from parent node */
+ ptype_nd = of_parse_phandle(nd, "qcom,pins", 0);
+ /* find the pin type info for this pin type node */
+ for (idx = 0; idx < dd->num_pintypes; idx++) {
+ pinfo = &dd->msm_pintype[idx];
+ if (ptype_nd == pinfo->node) {
+ of_node_put(ptype_nd);
+ break;
+ }
+ }
+ return pinfo;
+}
+
+/* create pinctrl_map entries by parsing device tree nodes */
+static int msm_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *cfg_np, struct pinctrl_map **maps,
+ unsigned *nmaps)
+{
+ struct msm_pinctrl_dd *dd;
+ struct device_node *parent;
+ struct msm_pindesc *pindesc;
+ struct msm_pintype_info *pinfo;
+ struct pinctrl_map *map;
+ const char *grp_name;
+ char *fn_name;
+ u32 val;
+ unsigned long *cfg;
+ int cfg_cnt = 0, map_cnt = 0, func_cnt = 0, ret = 0;
+
+ dd = pinctrl_dev_get_drvdata(pctldev);
+ pindesc = dd->msm_pindesc;
+ /* get parent node of config node */
+ parent = of_get_parent(cfg_np);
+ /*
+ * parent node contains pin grouping
+ * get pin type from pin grouping
+ */
+ pinfo = msm_pgrp_to_pintype(parent, dd);
+ /* check if there is a function associated with the parent pin group */
+ if (of_find_property(parent, "qcom,pin-func", NULL))
+ func_cnt++;
+ /* get pin configs */
+ ret = pinconf_generic_parse_dt_config(cfg_np, &cfg, &cfg_cnt);
+ if (ret) {
+ dev_err(dd->dev, "properties incorrect\n");
+ return ret;
+ }
+
+ map_cnt = cfg_cnt + func_cnt;
+
+ /* Allocate memory for pin-map entries */
+ map = kzalloc(sizeof(*map) * map_cnt, GFP_KERNEL);
+ if (!map)
+ return -ENOMEM;
+ *nmaps = 0;
+
+ /* Get group name from node */
+ of_property_read_string(parent, "label", &grp_name);
+ /* create the config map entry */
+ map[*nmaps].data.configs.group_or_pin = grp_name;
+ map[*nmaps].data.configs.configs = cfg;
+ map[*nmaps].data.configs.num_configs = cfg_cnt;
+ map[*nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
+ *nmaps += 1;
+
+ /* If there is no function specified in device tree return */
+ if (func_cnt == 0) {
+ *maps = map;
+ goto no_func;
+ }
+ /* Get function mapping */
+ of_property_read_u32(parent, "qcom,pin-func", &val);
+ fn_name = kzalloc(strlen(grp_name) + strlen("-func"),
+ GFP_KERNEL);
+ if (!fn_name) {
+ ret = -ENOMEM;
+ goto func_err;
+ }
+ snprintf(fn_name, strlen(grp_name) + strlen("-func") + 1, "%s%s",
+ grp_name, "-func");
+ map[*nmaps].data.mux.group = grp_name;
+ map[*nmaps].data.mux.function = fn_name;
+ map[*nmaps].type = PIN_MAP_TYPE_MUX_GROUP;
+ *nmaps += 1;
+ *maps = map;
+ of_node_put(parent);
+ return 0;
+
+func_err:
+ kfree(cfg);
+ kfree(map);
+no_func:
+ of_node_put(parent);
+ return ret;
+}
+
+/* free the memory allocated to hold the pin-map table */
+static void msm_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps)
+{
+ int idx;
+
+ for (idx = 0; idx < num_maps; idx++) {
+ if (map[idx].type == PIN_MAP_TYPE_CONFIGS_GROUP)
+ kfree(map[idx].data.configs.configs);
+ else if (map->type == PIN_MAP_TYPE_MUX_GROUP)
+ kfree(map[idx].data.mux.function);
+ };
+
+ kfree(map);
+}
+
+static struct pinctrl_ops msm_pctrlops = {
+ .get_groups_count = msm_get_grps_count,
+ .get_group_name = msm_get_grps_name,
+ .get_group_pins = msm_get_grps_pins,
+ .dt_node_to_map = msm_dt_node_to_map,
+ .dt_free_map = msm_dt_free_map,
+};
+
+static int msm_of_get_pin(struct device_node *np, int index,
+ struct msm_pinctrl_dd *dd, uint *pin)
+{
+ struct of_phandle_args pargs;
+ struct msm_pintype_info *pinfo;
+ int num_pintypes;
+ int ret, i;
+
+ ret = of_parse_phandle_with_args(np, "qcom,pins", "#qcom,pin-cells",
+ index, &pargs);
+ if (ret)
+ return ret;
+ pinfo = dd->msm_pintype;
+ num_pintypes = dd->num_pintypes;
+ for (i = 0; i < num_pintypes; i++) {
+ /* Find the matching pin type node */
+ if (pargs.np != pinfo->node)
+ continue;
+ /* Check if arg specified is in valid range for pin type */
+ if (pargs.args[0] > pinfo->num_pins) {
+ ret = -EINVAL;
+ dev_err(dd->dev, "Invalid pin number for type %s\n",
+ pinfo->name);
+ goto out;
+ }
+ /*
+ * Pin number = index within pin type + start of pin numbers
+ * for this pin type
+ */
+ *pin = pargs.args[0] + pinfo->pin_start;
+ }
+out:
+ of_node_put(pargs.np);
+ return ret;
+}
+
+static int msm_pinctrl_dt_parse_pins(struct device_node *dev_node,
+ struct msm_pinctrl_dd *dd)
+{
+ struct device *dev;
+ struct device_node *pgrp_np;
+ struct msm_pin_grps *pin_grps, *curr_grp;
+ struct msm_pmx_funcs *pmx_funcs, *curr_func;
+ char *func_name;
+ const char *grp_name;
+ int ret, i, grp_index = 0, func_index = 0;
+ uint pin = 0, *pins, num_grps = 0, num_pins = 0, len = 0;
+ uint num_funcs = 0;
+ u32 func = 0;
+
+ dev = dd->dev;
+ for_each_child_of_node(dev_node, pgrp_np) {
+ if (!of_find_property(pgrp_np, "qcom,pins", NULL))
+ continue;
+ if (of_find_property(pgrp_np, "qcom,pin-func", NULL))
+ num_funcs++;
+ num_grps++;
+ }
+
+ pin_grps = (struct msm_pin_grps *)devm_kzalloc(dd->dev,
+ sizeof(*pin_grps) * num_grps,
+ GFP_KERNEL);
+ if (!pin_grps) {
+ dev_err(dev, "Failed to allocate grp desc\n");
+ return -ENOMEM;
+ }
+ pmx_funcs = (struct msm_pmx_funcs *)devm_kzalloc(dd->dev,
+ sizeof(*pmx_funcs) * num_funcs,
+ GFP_KERNEL);
+ if (!pmx_funcs) {
+ dev_err(dev, "Failed to allocate grp desc\n");
+ return -ENOMEM;
+ }
+ /*
+ * Iterate over all child nodes, and for nodes containing pin lists
+ * populate corresponding pin group, and if provided, corresponding
+ * function
+ */
+ for_each_child_of_node(dev_node, pgrp_np) {
+ if (!of_find_property(pgrp_np, "qcom,pins", NULL))
+ continue;
+ curr_grp = pin_grps + grp_index;
+ /* Get group name from label*/
+ ret = of_property_read_string(pgrp_np, "label", &grp_name);
+ if (ret) {
+ dev_err(dev, "Unable to allocate group name\n");
+ return ret;
+ }
+ num_pins = of_count_phandle_with_args(pgrp_np,
+ "qcom,pins",
+ "qcom,pin-cells");
+ if (IS_ERR_VALUE(num_pins)) {
+ dev_err(dev, "pin count not specified for groups %s\n",
+ grp_name);
+ return ret;
+ }
+ pins = devm_kzalloc(dd->dev, sizeof(unsigned int) * num_pins,
+ GFP_KERNEL);
+ if (!pins) {
+ dev_err(dev, "Unable to allocte pins for %s\n",
+ grp_name);
+ return -ENOMEM;
+ }
+ for (i = 0; i < num_pins; i++) {
+ ret = msm_of_get_pin(pgrp_np, i, dd, &pin);
+ if (ret) {
+ dev_err(dev, "Pin grp %s does not have pins\n",
+ grp_name);
+ return ret;
+ }
+ pins[i] = pin;
+ }
+ curr_grp->pins = pins;
+ curr_grp->num_pins = num_pins;
+ curr_grp->name = grp_name;
+ grp_index++;
+ /* Check if func specified */
+ if (!of_find_property(pgrp_np, "qcom,pin-func", NULL))
+ continue;
+ curr_func = pmx_funcs + func_index;
+ len = strlen(grp_name) + strlen("-func") + 1;
+ func_name = devm_kzalloc(dev, len, GFP_KERNEL);
+ if (!func_name) {
+ dev_err(dev, "Cannot allocate func name for grp %s",
+ grp_name);
+ return -ENOMEM;
+ }
+ snprintf(func_name, len, "%s%s", grp_name, "-func");
+ curr_func->name = func_name;
+ curr_func->gps = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
+ if (!curr_func->gps) {
+ dev_err(dev, "failed to alloc memory for group list ");
+ return -ENOMEM;
+ }
+ of_property_read_u32(pgrp_np, "qcom,pin-func", &func);
+ curr_grp->func = func;
+ curr_func->gps[0] = grp_name;
+ curr_func->num_grps = 1;
+ func_index++;
+ }
+ dd->pin_grps = pin_grps;
+ dd->num_grps = num_grps;
+ dd->pmx_funcs = pmx_funcs;
+ dd->num_funcs = num_funcs;
+ return 0;
+}
+
+static void msm_populate_pindesc(struct msm_pintype_info *pinfo,
+ struct msm_pindesc *msm_pindesc)
+{
+ int i;
+ struct msm_pindesc *pindesc;
+
+ for (i = 0; i < pinfo->num_pins; i++) {
+ pindesc = &msm_pindesc[i + pinfo->pin_start];
+ pindesc->pin_info = pinfo;
+ snprintf(pindesc->name, sizeof(pindesc->name),
+ "%s-%d", pinfo->name, i);
+ }
+}
+
+static int msm_pinctrl_dt_parse_pintype(struct device_node *dev_node,
+ struct msm_pinctrl_dd *dd)
+{
+ struct device_node *pt_node;
+ struct msm_pindesc *msm_pindesc;
+ struct msm_pintype_info *pintype, *pinfo;
+ void __iomem **ptype_base;
+ u32 num_pins, pinfo_entries, curr_pins;
+ int i, ret;
+ uint total_pins = 0;
+
+ pinfo = dd->msm_pintype;
+ pinfo_entries = dd->num_pintypes;
+ curr_pins = 0;
+
+ for_each_child_of_node(dev_node, pt_node) {
+ for (i = 0; i < pinfo_entries; i++) {
+ pintype = &pinfo[i];
+ /* Check if node is pintype node */
+ if (!of_find_property(pt_node, pinfo->prop_name, NULL))
+ continue;
+ of_node_get(pt_node);
+ pintype->node = pt_node;
+ /* determine number of pins of given pin type */
+ ret = of_property_read_u32(pt_node, "qcom,num-pins",
+ &num_pins);
+ if (ret) {
+ dev_err(dd->dev, "num pins not specified\n");
+ return ret;
+ }
+ /* determine pin number range for given pin type */
+ pintype->num_pins = num_pins;
+ pintype->pin_start = curr_pins;
+ pintype->pin_end = curr_pins + num_pins;
+ ptype_base = &pintype->reg_data;
+ pintype->set_reg_base(ptype_base, dd->base);
+ total_pins += num_pins;
+ curr_pins += num_pins;
+ }
+ }
+ dd->msm_pindesc = devm_kzalloc(dd->dev,
+ sizeof(struct msm_pindesc) *
+ total_pins, GFP_KERNEL);
+ if (!dd->msm_pindesc) {
+ dev_err(dd->dev, "Unable to allocate msm pindesc");
+ goto alloc_fail;
+ }
+
+ dd->num_pins = total_pins;
+ msm_pindesc = dd->msm_pindesc;
+ /*
+ * Populate pin descriptor based on each pin type present in Device
+ * tree and supported by the driver
+ */
+ for (i = 0; i < pinfo_entries; i++) {
+ pintype = &pinfo[i];
+ /* If entry not in device tree, skip */
+ if (!pintype->node)
+ continue;
+ msm_populate_pindesc(pintype, msm_pindesc);
+ }
+ return 0;
+alloc_fail:
+ for (i = 0; i < pinfo_entries; i++) {
+ pintype = &pinfo[i];
+ if (pintype->node)
+ of_node_put(pintype->node);
+ }
+ return -ENOMEM;
+}
+
+static const struct of_device_id msm_pinctrl_dt_match[] = {
+ { .compatible = "qcom,msm-tlmm-v3",
+ .data = &tlmm_v3_pintypes, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, msm_pinctrl_dt_match);
+
+static void msm_pinctrl_cleanup_dd(struct msm_pinctrl_dd *dd)
+{
+ int i;
+ struct msm_pintype_info *pintype;
+
+ pintype = dd->msm_pintype;
+ for (i = 0; i < dd->num_pintypes; i++) {
+ if (pintype->node)
+ of_node_put(dd->msm_pintype[i].node);
+ }
+}
+
+static int msm_pinctrl_get_drvdata(struct msm_pinctrl_dd *dd,
+ struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ const struct msm_tlmm *tlmm_info;
+ int ret;
+ struct device_node *node = pdev->dev.of_node;
+
+ match = of_match_node(msm_pinctrl_dt_match, node);
+ if (IS_ERR(match))
+ return PTR_ERR(match);
+ tlmm_info = match->data;
+ dd->msm_pintype = tlmm_info->pintype_info;
+ dd->num_pintypes = tlmm_info->num_entries;
+ ret = msm_pinctrl_dt_parse_pintype(node, dd);
+ if (ret)
+ goto out;
+
+ ret = msm_pinctrl_dt_parse_pins(node, dd);
+ if (ret)
+ msm_pinctrl_cleanup_dd(dd);
+out:
+ return ret;
+}
+
+static int msm_register_pinctrl(struct msm_pinctrl_dd *dd)
+{
+ int i;
+ struct pinctrl_pin_desc *pindesc;
+ struct pinctrl_desc *ctrl_desc = &dd->pctl;
+
+ ctrl_desc->name = "msm-pinctrl";
+ ctrl_desc->owner = THIS_MODULE;
+ ctrl_desc->pmxops = &msm_pmxops;
+ ctrl_desc->confops = &msm_pconfops;
+ ctrl_desc->pctlops = &msm_pctrlops;
+
+ pindesc = devm_kzalloc(dd->dev, sizeof(*pindesc) * dd->num_pins,
+ GFP_KERNEL);
+ if (!pindesc) {
+ dev_err(dd->dev, "Failed to allocate pinctrl pin desc\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < dd->num_pins; i++) {
+ pindesc[i].number = i;
+ pindesc[i].name = dd->msm_pindesc[i].name;
+ }
+ ctrl_desc->pins = pindesc;
+ ctrl_desc->npins = dd->num_pins;
+ dd->pctl_dev = pinctrl_register(ctrl_desc, dd->dev, dd);
+ if (!dd->pctl_dev) {
+ dev_err(dd->dev, "could not register pinctrl driver\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int msm_pinctrl_probe(struct platform_device *pdev)
+{
+ struct msm_pinctrl_dd *dd;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int ret;
+
+ dd = devm_kzalloc(dev, sizeof(*dd), GFP_KERNEL);
+ if (!dd) {
+ dev_err(dev, "Alloction failed for driver data\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dd->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dd->base))
+ return PTR_ERR(dd->base);
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res)
+ dd->irq = res->start;
+ dd->dev = dev;
+ ret = msm_pinctrl_get_drvdata(dd, pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "driver data not available\n");
+ return ret;
+ }
+ ret = msm_register_pinctrl(dd);
+ if (ret) {
+ msm_pinctrl_cleanup_dd(dd);
+ return ret;
+ }
+ platform_set_drvdata(pdev, dd);
+ return 0;
+}
+
+static struct platform_driver msm_pinctrl_driver = {
+ .probe = msm_pinctrl_probe,
+ .driver = {
+ .name = "msm-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(msm_pinctrl_dt_match),
+ },
+};
+
+static int __init msm_pinctrl_drv_register(void)
+{
+ return platform_driver_register(&msm_pinctrl_driver);
+}
+postcore_initcall(msm_pinctrl_drv_register);
+
+static void __exit msm_pinctrl_drv_unregister(void)
+{
+ platform_driver_unregister(&msm_pinctrl_driver);
+}
+module_exit(msm_pinctrl_drv_unregister);
+
+MODULE_AUTHOR("Hanumant Singh <hanumant@codeaurora.org>");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/pinctrl/pinctrl-msm.h b/drivers/pinctrl/pinctrl-msm.h
new file mode 100644
index 0000000..fee159d
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-msm.h
@@ -0,0 +1,97 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PINCTRL_MSM_H__
+#define __PINCTRL_MSM_H__
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/machine.h>
+
+/**
+ * struct msm_pin_group: group of pins having the same pinmux function.
+ * @name: name of the pin group.
+ * @pins: the pins included in this group.
+ * @num_pins: number of pins included in this group.
+ * @func: the function number to be programmed when selected.
+ */
+struct msm_pin_grps {
+ const char *name;
+ unsigned int *pins;
+ unsigned num_pins;
+ u32 func;
+};
+
+/**
+ * struct msm_pmx_funcs: represent a pin function.
+ * @name: name of the pin function.
+ * @gps: one or more names of pin groups that provide this function.
+ * @num_grps: number of groups included in @groups.
+ */
+struct msm_pmx_funcs {
+ const char *name;
+ const char **gps;
+ unsigned num_grps;
+};
+
+/**
+ * struct msm_pintype_info: represent a pin type supported by the TLMM.
+ * @prg_cfg: helper to program a given config for a pintype.
+ * @prg_func: helper to program a given func for a pintype.
+ * @set_reg_base: helper to set the register base address for a pintype.
+ * @reg_data: register base for a pintype.
+ * @prop_name: DT property name for a pintype.
+ * @name: name of pintype.
+ * @num_pins: number of pins of given pintype.
+ * @pin_start: starting pin number for the given pintype within pinctroller.
+ * @pin_end: ending pin number for the given pintype within pinctroller.
+ * @node: device node for the pintype.
+ */
+struct msm_pintype_info {
+ int (*prg_cfg)(uint pin_no, unsigned long *config, void *reg_data,
+ bool rw);
+ void (*prg_func)(uint pin_no, u32 func, void *reg_data, bool enable);
+ void (*set_reg_base)(void __iomem **ptype_base,
+ void __iomem *tlmm_base);
+ void __iomem *reg_data;
+ const char *prop_name;
+ const char *name;
+ u32 num_pins;
+ int pin_start;
+ int pin_end;
+ struct device_node *node;
+};
+
+/**
+ * struct msm_tlmm: represents all the TLMM pintypes for a given TLMM version.
+ * @num_entries: number of pintypes.
+ * @pintype_info: descriptor for the pintypes. One for each present.
+ */
+struct msm_tlmm {
+ const uint num_entries;
+ struct msm_pintype_info *pintype_info;
+};
+
+/**
+ * struct msm_pindesc: descriptor for all pins maintained by pinctrl driver
+ * @pin_info: pintype for a given pin.
+ * @name: name of the pin.
+ */
+struct msm_pindesc {
+ struct msm_pintype_info *pin_info;
+ char name[20];
+};
+
+/* TLMM version specific data */
+extern struct msm_tlmm tlmm_v3_pintypes;
+#endif
+
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--


\
 
 \ /
  Last update: 2013-07-25 00:21    [W:0.184 / U:5.916 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site