lkml.org 
[lkml]   [2013]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] misc: Add crossbar driver
On Wednesday 24 July 2013 10:17 PM, Nishanth Menon wrote:
> On 07/24/2013 11:38 AM, Santosh Shilimkar wrote:
>> On Wednesday 24 July 2013 12:08 PM, Nishanth Menon wrote:
>>> That said, maybe a intermediate pinctrl approach might be more pragmatic and less theoretically flexible.
>>> an option might be to "statically allocate" default number of interrupts to a domain - example:
>>> * GIC IRQ 72->78 allotted to UARTs
>>> * pinctrl mapping provided for those but only 6 can be used (rest are marked status="disabled" as default) at any given time (choice of pinctrl option determines GIC interrupt line to use)
>>> * All modules will have a pinctrl definition to have a mapping - to avoid bootloader overriding default cross bar setting in ways un-expected by kernel.
>>>
>>> Does that sound fair trade off?
>> This sounds better. That way we can get all the devices in the DT at least.
>
> Fair enough - if Linus and Tony are still ok with this approach to the problem, seeing a patch series with the effect would be beneficial.
>
Ok, i will use this idea of certain number interrupts to groups.
Yes on DRA7XX, we have about 160 gic lines and 320 irq crossbar device inputs contending for it.
1:2 and fully arbitrary. But will we be really exhausting them ?

Regards,
Sricharan


\
 
 \ /
  Last update: 2013-07-24 21:21    [W:0.100 / U:15.916 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site