lkml.org 
[lkml]   [2013]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
On 07/23/2013 07:28 PM, Bin Liu wrote:
> Hi,

Hi,

>
> On Mon, Jul 22, 2013 at 1:10 PM, Sebastian Andrzej Siewior
> <bigeasy@linutronix.de <mailto:bigeasy@linutronix.de>> wrote:
>
> This patch adds the MUSB_DEVCTL_SESSION back after it has been removed.
> If it is missing then the host session is not recognized. This bit is
> added initially added in musb_start() and removed after the first device
> disconnect.
>
> AFAIK, after the device is disconnected, the OTG state machine will go
> back to B_IDLE/A_IDLE state. SESSION is not needed in this case.


Okay.

> In OTG mode, when no device is plugged, the ID pin is floating, you can
> never hold the host session in this case, even set the SESSION bit. The
> SESSION bit will be cleared by the controller after 100ms.

In my testing the bit remains set. How is the bit supposed to come back
after I connect a host device?

> Regards,
> -Bin.
>

Sebastian


\
 
 \ /
  Last update: 2013-07-23 19:41    [W:0.358 / U:3.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site