Messages in this thread | | | From | Treeve Jelbert <> | Subject | [NETWORKING DRIVERS RT2X00] please add support for Asus PCE-N53 (0x1814, 0x5592) | Date | Tue, 23 Jul 2013 12:49:17 +0200 |
| |
linux-3.10.0 does not support device (0x1814, 0x5592) Asus PCE-N53 which I would like to use on with 5GHz network.
#lspci 02:00.0 Network controller: Ralink corp. Device 5592 Subsystem: ASUSTeK Computer Inc. Device 851a
# lspci -d :5592 -nn 02:00.0 Network controller [0280]: Ralink corp. Device [1814:5592]
#modprobe rt2x00pci [ 2724.173984] cfg80211: Calling CRDA to update world regulatory domain
device id (0x1814, 0x5592) 'Asus PCE-N53' not present in rt2800pci.c
After adding this device id , it get the following messages
[ 8.993741] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 8.994857] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34 [ 9.073053] NET: Registered protocol family 17 [ 10.438586] ieee80211 phy0: rt2x00lib_rxdone_read_signal: Warning - Frame received with unrecognized signal, mode=0x0000, signal=0x0000, type=4 [ 69.171225] ieee80211 phy0: rt2x00lib_rxdone: Error - Wrong frame size 0 max 3840
#lsmod rt2800pci 9514 0 eeprom_93cx6 1913 1 rt2800pci rt2x00pci 2368 1 rt2800pci rt2800lib 52747 1 rt2800pci crc_ccitt 1235 1 rt2800lib rt2x00mmio 2425 1 rt2800pci rt2x00lib 30593 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio led_class 2531 1 rt2x00lib mac80211 209216 3 rt2x00lib,rt2x00pci,rt2800lib
#ifconfig wlan0 Link encap:Ethernet HWaddr 30:85:A9:F4:B6:61 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
| |