lkml.org 
[lkml]   [2013]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/4] arm: dts: Add USB phy nodes for AM33XX
On 07/19/2013 03:56 PM, Sergei Shtylyov wrote:
> On 19-07-2013 16:34, George Cherian wrote:
>
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi
>> b/arch/arm/boot/dts/am33xx.dtsi
>> index 8e1248f..e3890c4 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -326,21 +326,59 @@
>> status = "disabled";
>> };
>>
>> - usb@47400000 {
>> - compatible = "ti,musb-am33xx";
>> - reg = <0x47400000 0x1000 /* usbss */
>> - 0x47401000 0x800 /* musb instance 0 */
>> - 0x47401800 0x800>; /* musb instance 1 */
>> - interrupts = <17 /* usbss */
>> - 18 /* musb instance 0 */
>> - 19>; /* musb instance 1 */
>> - multipoint = <1>;
>> - num-eps = <16>;
>> - ram-bits = <12>;
>> - port0-mode = <3>;
>> - port1-mode = <3>;
>> - power = <250>;
>> - ti,hwmods = "usb_otg_hs";
>> + phy1: am335x-usb0@44e10620 {
>
> Shouldn't the PHYs be *under* the usb0/1 device nodes in the hierarchy?
> They're not on the same bus as the MUSB controllers for sure.

I redo the complete thing. I have now:

usb: usb@47400000 {
compatible = "ti,am33xx-usb";

usb0_phy: phy@47401300 {
compatible = "ti,am335x-usb-phy";
}
usb0: usb@47401000 {
musb0: usb@47401400 {
compatible = "mg,musbmhdrc";
}
}
usb1_phy: phy@47402300 {
compatible = "ti,am335x-usb-phy";
}
usb1: usb@47402000 {
musb1: usb@47402400 {
compatible = "mg,musbmhdrc";
}
}
}

And you want usb0_phy to be child of usb0? In the TRM they are all in
the same block.

>
> WBR, Sergei
>

Sebastian


\
 
 \ /
  Last update: 2013-07-19 19:21    [W:0.113 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site