lkml.org 
[lkml]   [2013]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 044/145] [SCSI] sd: Update WRITE SAME heuristics
Date
3.8.13.5 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Martin K. Petersen" <martin.petersen@oracle.com>

commit 66c28f97120e8a621afd5aa7a31c4b85c547d33d upstream.

SATA drives located behind a SAS controller would incorrectly receive
WRITE SAME commands. Tweak the heuristics so that:

- If REPORT SUPPORTED OPERATION CODES is provided we will use that to
choose between WRITE SAME(16), WRITE SAME(10) and disabled. This also
fixes an issue with the old code which would issue WRITE SAME(10)
despite the command not being whitelisted in REPORT SUPPORTED
OPERATION CODES.

- If REPORT SUPPORTED OPERATION CODES is not provided we will fall back
to WRITE SAME(10) unless the device has an ATA Information VPD page.
The assumption is that a SATL which is smart enough to implement
WRITE SAME would also provide REPORT SUPPORTED OPERATION CODES.

To facilitate the new heuristics scsi_report_opcode() has been modified
to so we can distinguish between "operation not supported" and "RSOC not
supported".

Reported-by: H. Peter Anvin <hpa@zytor.com>
Tested-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
drivers/scsi/scsi.c | 8 ++++----
drivers/scsi/sd.c | 46 ++++++++++++++++++++++++++++++++--------------
drivers/scsi/sd.h | 1 +
3 files changed, 37 insertions(+), 18 deletions(-)

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 2c0d0ec..3b1ea34 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1070,8 +1070,8 @@ EXPORT_SYMBOL_GPL(scsi_get_vpd_page);
* @opcode: opcode for command to look up
*
* Uses the REPORT SUPPORTED OPERATION CODES to look up the given
- * opcode. Returns 0 if RSOC fails or if the command opcode is
- * unsupported. Returns 1 if the device claims to support the command.
+ * opcode. Returns -EINVAL if RSOC fails, 0 if the command opcode is
+ * unsupported and 1 if the device claims to support the command.
*/
int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
unsigned int len, unsigned char opcode)
@@ -1081,7 +1081,7 @@ int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
int result;

if (sdev->no_report_opcodes || sdev->scsi_level < SCSI_SPC_3)
- return 0;
+ return -EINVAL;

memset(cmd, 0, 16);
cmd[0] = MAINTENANCE_IN;
@@ -1097,7 +1097,7 @@ int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
if (result && scsi_sense_valid(&sshdr) &&
sshdr.sense_key == ILLEGAL_REQUEST &&
(sshdr.asc == 0x20 || sshdr.asc == 0x24) && sshdr.ascq == 0x00)
- return 0;
+ return -EINVAL;

if ((buffer[1] & 3) == 3) /* Command supported */
return 1;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 0f0370f..f5fcf65 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -442,8 +442,10 @@ sd_store_write_same_blocks(struct device *dev, struct device_attribute *attr,

if (max == 0)
sdp->no_write_same = 1;
- else if (max <= SD_MAX_WS16_BLOCKS)
+ else if (max <= SD_MAX_WS16_BLOCKS) {
+ sdp->no_write_same = 0;
sdkp->max_ws_blocks = max;
+ }

sd_config_write_same(sdkp);

@@ -740,7 +742,6 @@ static void sd_config_write_same(struct scsi_disk *sdkp)
{
struct request_queue *q = sdkp->disk->queue;
unsigned int logical_block_size = sdkp->device->sector_size;
- unsigned int blocks = 0;

if (sdkp->device->no_write_same) {
sdkp->max_ws_blocks = 0;
@@ -752,18 +753,20 @@ static void sd_config_write_same(struct scsi_disk *sdkp)
* blocks per I/O unless the device explicitly advertises a
* bigger limit.
*/
- if (sdkp->max_ws_blocks == 0)
- sdkp->max_ws_blocks = SD_MAX_WS10_BLOCKS;
-
- if (sdkp->ws16 || sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
- blocks = min_not_zero(sdkp->max_ws_blocks,
- (u32)SD_MAX_WS16_BLOCKS);
- else
- blocks = min_not_zero(sdkp->max_ws_blocks,
- (u32)SD_MAX_WS10_BLOCKS);
+ if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
+ sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS16_BLOCKS);
+ else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes)
+ sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS10_BLOCKS);
+ else {
+ sdkp->device->no_write_same = 1;
+ sdkp->max_ws_blocks = 0;
+ }

out:
- blk_queue_max_write_same_sectors(q, blocks * (logical_block_size >> 9));
+ blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks *
+ (logical_block_size >> 9));
}

/**
@@ -2647,9 +2650,24 @@ static void sd_read_block_provisioning(struct scsi_disk *sdkp)

static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
{
- if (scsi_report_opcode(sdkp->device, buffer, SD_BUF_SIZE,
- WRITE_SAME_16))
+ struct scsi_device *sdev = sdkp->device;
+
+ if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
+ sdev->no_report_opcodes = 1;
+
+ /* Disable WRITE SAME if REPORT SUPPORTED OPERATION
+ * CODES is unsupported and the device has an ATA
+ * Information VPD page (SAT).
+ */
+ if (!scsi_get_vpd_page(sdev, 0x89, buffer, SD_BUF_SIZE))
+ sdev->no_write_same = 1;
+ }
+
+ if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16) == 1)
sdkp->ws16 = 1;
+
+ if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME) == 1)
+ sdkp->ws10 = 1;
}

static int sd_try_extended_inquiry(struct scsi_device *sdp)
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 2386aeb..7a049de 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -84,6 +84,7 @@ struct scsi_disk {
unsigned lbpws : 1;
unsigned lbpws10 : 1;
unsigned lbpvpd : 1;
+ unsigned ws10 : 1;
unsigned ws16 : 1;
};
#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev)
--
1.8.1.2


\
 
 \ /
  Last update: 2013-07-18 07:01    [W:0.682 / U:26.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site