lkml.org 
[lkml]   [2013]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
On Tue, Jul 16, 2013 at 02:38:03PM -0700, Nicholas A. Bellinger wrote:
> [ 7.927818] scsi_execute(): Calling blk_mq_free_request >>>
> [ 7.927826] scsi 0:0:0:0: Direct-Access ATA ST9500530NS CC03 PQ: 0 ANSI: 5
>
> OK, so INQUIRY response payload is looking as expected here.

Yep. It is not on the top of my head, but I remember something like INQUIRYs
are emulated and thus do not have payload.

> [ 7.927960] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
> [ 7.927964] sd 0:0:0:0: [sda] 1 512-byte logical blocks: (512 B/512 B)
> [ 7.927965] sd 0:0:0:0: [sda] 0-byte physical blocks
>
> Strange.. READ_CAPACITY appears to be returning a payload as zeros..?

Yep. Because blk_execute_rq() does not put the proper callback and data do
not get copied from sg's to bounce buffer. That is why I tried to use
blk_mq_execute_rq() instead. Once I do that, data start getting read and
booting stops elsewhere.

Of course, I was suspecting that change alone is not valid and wondered
about the status of scsi-mq in the first place, and if more changes are
coming.

So I it turns out "req->errors + req->resid_len" issue (you described
earlier) needs to be addressed before going forward with libata (only?).

> Not sure why yet some control CDBs are getting back the expected
> payload, while others are returning zeros..

Bio buffers do not get updated from callback.

> Also, looking at the included stack back-trace:

[...]

Thanks a lot for these and other your comments, Nicholas!

--
Regards,
Alexander Gordeev
agordeev@redhat.com


\
 
 \ /
  Last update: 2013-07-17 19:02    [W:0.145 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site