Messages in this thread Patch in this message | | | From | Boris BREZILLON <> | Subject | [PATCH v2 30/42] ARM: at91/dt: move at91sam9263 SoC to new at91 clk implem | Date | Wed, 17 Jul 2013 17:55:25 +0200 |
| |
Define at91sam9263 clocks in at91sam9263 device tree. Add references to the appropriate clocks in each peripheral.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> --- arch/arm/boot/dts/at91sam9263.dtsi | 237 ++++++++++++++++++++++++++++++++++++ 1 file changed, 237 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index d5bd65f..f4b0d3b 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -68,6 +68,208 @@ pmc: pmc@fffffc00 { compatible = "atmel,at91rm9200-pmc"; reg = <0xfffffc00 0x100>; + + clk32k: slck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main", "fixed-clock"; + #clock-cells = <0>; + clocks = <&clk32k>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + clocks = <&main>; + id = <0>; + input = <1000000 32000000>; + output = <80000000 200000000 + 190000000 240000000>; + out = <0 2>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + clocks = <&main>; + id = <1>; + input = <1000000 32000000>; + output = <80000000 200000000 + 190000000 240000000>; + out = <0 2>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + output = <0 120000000>; + divisors = <1 2 4 0>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + clocks = <&pllb>; + divisors = <1 2 4 0>; + }; + + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #clock-cells = <1>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + + prog0@0 { + id = <0>; + }; + + prog1@1 { + id = <1>; + }; + + prog2@2 { + id = <2>; + }; + + prog3@3 { + id = <3>; + }; + }; + + system: systemck { + compatible = "atmel,at91rm9200-clk-system"; + #clock-cells = <1>; + + udpck@6 { + id = <6>; + }; + + uhpck@7 { + id = <7>; + }; + + pck0@8 { + id = <8>; + }; + + pck1@9 { + id = <9>; + }; + + pck2@10 { + id = <10>; + }; + + pck3@11 { + id = <11>; + }; + }; + + periph: periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #clock-cells = <1>; + clocks = <&mck>; + + pioA_clk@2 { + id = <2>; + }; + + pioB_clk@3 { + id = <3>; + }; + + pioCDE_clk@4 { + id = <4>; + }; + + usart0_clk@7 { + id = <7>; + }; + + usart1_clk@8 { + id = <8>; + }; + + usart2_clk@9 { + id = <9>; + }; + + mci0_clk@10 { + id = <10>; + }; + + mci1_clk@11 { + id = <11>; + }; + + can_clk@12 { + id = <12>; + }; + + twi_clk@13 { + id = <13>; + }; + + spi0_clk@14 { + id = <14>; + }; + + spi1_clk@15 { + id = <15>; + }; + + ssc0_clk@16 { + id = <16>; + }; + + ssc1_clk@17 { + id = <17>; + }; + + ac97_clk@18 { + id = <18>; + }; + + tcb_clk@19 { + id = <19>; + }; + + pwm_clk@20 { + id = <20>; + }; + + pclk@21 { + id = <21>; + }; + + 2dge_clk@23 { + id = <23>; + }; + + udc_clk@24 { + id = <24>; + }; + + isi_clk@25 { + id = <25>; + }; + + lcdc_clk@26 { + id = <26>; + }; + + dma_clk@27 { + id = <27>; + }; + + ohci_clk@29 { + id = <29>; + }; + }; }; ramc: ramc@ffffe200 { @@ -80,12 +282,15 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&periph 19>; + clock-names = "t0_clk"; }; rstc@fffffd00 { @@ -374,6 +579,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 2>; }; pioB: gpio@fffff400 { @@ -384,6 +590,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 3>; }; pioC: gpio@fffff600 { @@ -394,6 +601,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 4>; }; pioD: gpio@fffff800 { @@ -404,6 +612,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 4>; }; pioE: gpio@fffffa00 { @@ -414,6 +623,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 4>; }; }; @@ -423,6 +633,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -434,6 +646,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&periph 7>; + clock-names = "usart"; status = "disabled"; }; @@ -445,6 +659,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&periph 8>; + clock-names = "usart"; status = "disabled"; }; @@ -456,6 +672,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&periph 9>; + clock-names = "usart"; status = "disabled"; }; @@ -465,6 +683,8 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&periph 16>; + clock-names = "pclk"; status = "disabled"; }; @@ -474,6 +694,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&periph 17>; + clock-names = "pclk"; status = "disabled"; }; @@ -483,6 +705,8 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&periph 21>, <&periph 21>; + clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -490,6 +714,8 @@ compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&periph 24>, <&system 7>; + clock-names = "udc_clk", "udpck"; status = "disabled"; }; @@ -499,6 +725,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; + clocks = <&periph 13>; status = "disabled"; }; @@ -508,6 +735,8 @@ interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&periph 10>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -517,6 +746,8 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&periph 11>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -534,6 +765,8 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&periph 14>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -545,6 +778,8 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&periph 15>; + clock-names = "spi_clk"; status = "disabled"; }; }; @@ -571,6 +806,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&periph 29>, <&periph 29>, <&system 6>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; -- 1.7.9.5
| |