lkml.org 
[lkml]   [2013]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 2/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards
2013/7/12 Mark Brown <broonie@kernel.org>:
> On Thu, Jul 11, 2013 at 06:15:54PM +0200, Richard Genoud wrote:
>> From: Nicolas Ferre <nicolas.ferre@atmel.com>
>>
>> Description of the Asoc machine driver for an at91sam9x5 based board
>
> ASoC.
>
>> +sam9x5 pins:
>> + * LOUT
>> + * ROUT
>> + * LHPOUT
>> + * RHPOUT
>> + * LLINEIN
>> + * RLINEIN
>> + * MICIN
>
> These aren't pins on the CPU, they're pins on the CODEC, and you should
> be adding this to the binding document for the CODEC and referring to
> that rather than having them in each individual binding document. This
> also helps if any new variants are added (not that this is likely for
> the WM8731).
ok, I'll move that

>
>> +static struct sam9x5_drvdata sam9x5_priv;
>
> Why is this a global static?
>
>> + ret = snd_soc_register_card(&snd_soc_sam9x5);
>> + if (ret) {
>> + dev_err(&pdev->dev,
>> + "ASoC: Platform device allocation failed\n");
>> + goto out_put_audio;
>> + }
>
>> + platform_set_drvdata(pdev, &snd_soc_sam9x5);
>
> It should be being dynamically allocated and retrieved as driver data
> when needed.
ok.

Thanks !


--
for me, ck means con kolivas and not calvin klein... does it mean I'm a geek ?


\
 
 \ /
  Last update: 2013-07-15 17:42    [W:0.124 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site