lkml.org 
[lkml]   [2013]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] pch_gbe: Add MinnowBoard support
From
Date
On Fri, 2013-07-12 at 17:58 -0700, Darren Hart wrote:
> The MinnowBoard uses an AR803x PHY with the PCH GBE which requires
> special handling. Use the MinnowBoard PCI Subsystem ID to detect this
> and add a pci_device_id.driver_data structure and functions to handle
> platform setup.

trivial comments only:

Please use scripts/checkpatch.pl

[]

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c[]
[]
> +static int pch_gbe_minnow_platform_init(struct pci_dev *pdev)
[]
> + if (ret){

Missing space before brace

> diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
[]
> +int pch_gbe_phy_tx_clk_delay(struct pch_gbe_hw *hw)
[]
> + case PHY_AR803X_ID:
> + netdev_dbg(adapter->netdev,
> + "Configuring AR803X PHY for 2ns TX clock delay\n");
[]
> + netdev_err(adapter->netdev,
> + "Unknown PHY (%x), could not set TX clock delay.\n",
> + hw->phy.id);
[]
> + netdev_err(adapter->netdev,
> + "Could not configure tx clock delay for PHY.\n");
[]
> +int pch_gbe_phy_disable_hibernate(struct pch_gbe_hw *hw)
[]
> + case PHY_AR803X_ID:
> + netdev_dbg(adapter->netdev,
> + "Disabling hibernation for AR803X PHY\n");

It'd be nice if no period before newline were used
everywhere.

> + netdev_err(adapter->netdev,
> + "Unknown PHY (%x), could not disable hibernation\n",
> + hw->phy.id);
[]
> + netdev_err(adapter->netdev,
> + "Could not disable PHY hibernation.\n");




\
 
 \ /
  Last update: 2013-07-13 03:41    [W:0.155 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site