lkml.org 
[lkml]   [2013]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv4 6/8] ARM: mxs: dt: cfa10055: make hogpins grabbed by respective drivers
Date
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/imx28-cfa10055.dts | 38 ++++++++++++------------------------
1 file changed, 13 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 1581112..171bcbe 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -23,36 +23,13 @@
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
- pinctrl-names = "default", "default";
- pinctrl-1 = <&hog_pins_cfa10055
- &hog_pins_cfa10055_pullup>;
-
- hog_pins_cfa10055: hog-10055@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
- >;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>;
- };
-
- hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
- >;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <1>;
- };
-
spi2_pins_cfa10055: spi2-cfa10055@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
@@ -98,12 +75,23 @@
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
};

lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_18bit_pins_cfa10055
- &lcdif_pins_cfa10055>;
+ &lcdif_pins_cfa10055
+ &lcdif_pins_cfa10055_pullup>;
display = <&display>;
status = "okay";

--
1.8.1.2


\
 
 \ /
  Last update: 2013-07-01 16:01    [W:0.041 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site