Messages in this thread | | | From | "J, KEERTHY" <> | Subject | RE: [PATCH v3] regulator: palmas: model SMPS10 as two regulators | Date | Mon, 1 Jul 2013 10:19:55 +0000 |
| |
Hi Mark,
> -----Original Message----- > From: ABRAHAM, KISHON VIJAY > Sent: Monday, July 01, 2013 3:36 PM > To: Mark Brown > Cc: lgirdwood@gmail.com; ldewangan@nvidia.com; gg@slimlogic.co.uk; > sameo@linux.intel.com; J, KEERTHY; linux-kernel@vger.kernel.org > Subject: Re: [PATCH v3] regulator: palmas: model SMPS10 as two > regulators > > Hi, > > On Monday 01 July 2013 03:31 PM, Mark Brown wrote: > > On Mon, Jul 01, 2013 at 03:19:42PM +0530, Kishon Vijay Abraham I > wrote: > >> SMPS10 has two outputs OUT1 and OUT2 and have one input IN1. > >> SMPS10-OUT2 is connected to SMPS10-IN1 and can be configured either > >> in BOOST mode or BYPASS mode. regulator_enable of SMPS10-OUT2 > >> configures it in BOOST mode. For BYPASS mode > regulator_allow_bypass() > >> API can be used. SMPS10-OUT1 is connected to SMPS10-OUT2 and can be > >> enabled using regulator_enable(). > > > > This doesn't apply... > > Ok. Which tree/branch should it be based on?. I created it on next- > 20130628 as base.
I had submitted a patch on the same file which was pulled by Samuel. Kishon is based on a branch which has my patch. I think that is missing in your Branch. This is the reason why it is not applying.
> > Thanks > Kishon
Regards, Keerthy
| |