lkml.org 
[lkml]   [2013]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/5] cpufreq:boost: Add support for software based CPU frequency boost
From
Hi,

On 6 June 2013 12:37, Lukasz Majewski <l.majewski@samsung.com> wrote:
> This commit adds support for software based frequency boosting.
> Exynos4 SoCs (e.g. 4x12) allow setting of frequency above its normal
> condition limits. This can be done for some short time.
>
> Overclocking (boost) support came from cpufreq driver (which is platform
> dependent). Hence the data structure describing it is defined at its file.
>
> To allow support for either SW and HW (Intel) based boosting, the cpufreq
> core code has been extended to support both solutions.
>
> The main boost switch has been put at /sys/devices/system/cpu/cpufreq/boost.

Log requires some better paragraphs but I am not concerned about it for now.

> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
> ---
> drivers/cpufreq/cpufreq.c | 156 ++++++++++++++++++++++++++++++++++++++++++
> drivers/cpufreq/freq_table.c | 87 ++++++++++++++++++++++-
> include/linux/cpufreq.h | 35 +++++++++-
> 3 files changed, 275 insertions(+), 3 deletions(-)

My initial view on this patch is: "It is overly engineered and needs
to get simplified"

> diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
> index ca74e27..8cf9a92 100644
> --- a/drivers/cpufreq/cpufreq.c
> +++ b/drivers/cpufreq/cpufreq.c
> @@ -133,6 +133,11 @@ bool have_governor_per_policy(void)
> return cpufreq_driver->have_governor_per_policy;
> }
>
> +/**
> + * Global definition of cpufreq_boost structure
> + */
> +struct cpufreq_boost *cpufreq_boost;

Probably just a 'static bool' here cpufreq_boost_enabled. Which takes
care of selection from sysfs.

> static struct cpufreq_governor *__find_governor(const char *str_governor)
> {
> @@ -761,6 +805,18 @@ static int cpufreq_add_dev_interface(unsigned int cpu,
> if (cpufreq_set_drv_attr_files(policy, cpufreq_driver->attr))
> goto err_out_kobj_put;
>
> + if (cpufreq_driver->boost) {
> + if (sysfs_create_file(cpufreq_global_kobject,
> + &(global_boost.attr)))

This will report error for systems where we have two policy structures.
As we are creating something already present.

> + pr_warn("could not register global boost sysfs file\n");
> + else
> + pr_debug("registered global boost sysfs file\n");

Please make all your prints to print function name too:

pr_debug("%s: foo\n", __func__, foo);

> + if (cpufreq_set_drv_attr_files(policy,
> + cpufreq_driver->boost->attr))

Why is this required? Why do we want platforms to add some files
in sysfs?

> /*********************************************************************
> + * BOOST *
> + *********************************************************************/
> +int cpufreq_boost_trigger_state(struct cpufreq_policy *policy, int state)
> +{
> + struct cpufreq_boost *boost;
> + unsigned long flags;
> + int ret = 0;
> +
> + if (!policy || !policy->boost || !policy->boost->low_level_boost)
> + return -ENODEV;
> +
> + boost = policy->boost;
> + write_lock_irqsave(&cpufreq_driver_lock, flags);
> +
> + if (boost->status != state) {
> + policy->boost->status = state;
> + ret = boost->low_level_boost(policy, state);
> + if (ret) {
> + pr_err("BOOST cannot %sable low level code (%d)\n",
> + state ? "en" : "dis", ret);
> + return ret;
> + }
> + }
> +
> + write_unlock_irqrestore(&cpufreq_driver_lock, flags);
> +
> + pr_debug("cpufreq BOOST %sabled\n", state ? "en" : "dis");
> +
> + return 0;
> +}
> +
> +/**
> + * cpufreq_boost_notifier - notifier callback for cpufreq policy change.
> + * <at> nb: struct notifier_block * with callback info.
> + * <at> event: value showing cpufreq event for which this function invoked.
> + * <at> data: callback-specific data
> + */
> +static int cpufreq_boost_notifier(struct notifier_block *nb,
> + unsigned long event, void *data)
> +{
> + struct cpufreq_policy *policy = data;
> +
> + if (event == CPUFREQ_INCOMPATIBLE) {
> + if (!policy || !policy->boost)
> + return -ENODEV;
> +
> + if (policy->boost->status == CPUFREQ_BOOST_EN) {
> + pr_info("NOTIFIER BOOST: MAX: %d e:%lu cpu: %d\n",
> + policy->max, event, policy->cpu);
> + cpufreq_boost_trigger_state(policy, 0);
> + }
> + }
> +
> + return 0;
> +}
> +
> +/* Notifier for cpufreq policy change */
> +static struct notifier_block cpufreq_boost_notifier_block = {
> + .notifier_call = cpufreq_boost_notifier,
> +};
> +
> +int cpufreq_boost_init(struct cpufreq_policy *policy)
> +{
> + int ret = 0;
> +
> + if (!policy)
> + return -EINVAL;

Heh, policy can't be NULL here.

> + if (!cpufreq_driver->boost) {
> + pr_err("Boost mode not supported on this device\n");

Wow!! You want to screw everybody else's logs with this message.
Its not a crime if you don't have boost mode supported :)

Actually this routine must be called only if cpufreq_driver->boost
is valid.

> + return -ENODEV;
> + }
> +
> + policy->boost = cpufreq_boost = cpufreq_driver->boost;

Why are we copying same pointer to policy->boost? Driver is
passing pointer to a single memory location, just save it globally.

> + /* disable boost for newly created policy - as we e.g. change
> + governor */
> + policy->boost->status = CPUFREQ_BOOST_DIS;

Drivers supporting boost may want boost to be enabled by default,
maybe without any sysfs calls.

> + /* register policy notifier */
> + ret = cpufreq_register_notifier(&cpufreq_boost_notifier_block,
> + CPUFREQ_POLICY_NOTIFIER);
> + if (ret) {
> + pr_err("CPUFREQ BOOST notifier not registered.\n");
> + return ret;
> + }
> + /* add policy to policies list headed at struct cpufreq_boost */
> + list_add_tail(&policy->boost_list, &cpufreq_boost->policies);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(cpufreq_boost_init);

Why do we need to maintain a list of boost here? notifiers? complex :(

> +/*********************************************************************
> * REGISTER / UNREGISTER CPUFREQ DRIVER *
> *********************************************************************/
>
> @@ -1954,6 +2106,10 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver)
> pr_debug("unregistering driver %s\n", driver->name);
>
> subsys_interface_unregister(&cpufreq_interface);
> +
> + if (cpufreq_driver->boost)
> + sysfs_remove_file(cpufreq_global_kobject, &(global_boost.attr));

You haven't removed this from policy. Memory leak.

> unregister_hotcpu_notifier(&cpufreq_cpu_notifier);
>
> write_lock_irqsave(&cpufreq_driver_lock, flags);
> diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
> index d7a7966..0e95524 100644
> --- a/drivers/cpufreq/freq_table.c
> +++ b/drivers/cpufreq/freq_table.c
> @@ -3,6 +3,8 @@
> *
> * Copyright (C) 2002 - 2003 Dominik Brodowski
> *
> + * Copyright (C) 2013 Lukasz Majewski <l.majewski@samsung.com>
> + *

You shouldn't add it unless you did some major work on this file. You aren't
maintaining this file in 2013.

> +static int cpufreq_frequency_table_skip_boost(struct cpufreq_policy *policy,
> + unsigned int index)
> +{
> + if (index == CPUFREQ_BOOST)
> + if (!policy->boost ||

This shouldn't be true. If index has got CPUFREQ_BOOST, then driver
has to support boost.

> + policy->boost->status == CPUFREQ_BOOST_DIS)
> + return 1;
> +
> + return 0;
> +}
> +
> +unsigned int
> +cpufreq_frequency_table_boost_max(struct cpufreq_frequency_table *freq_table)
> +{
> + int index, boost_freq_max;
> +
> + for (index = 0, boost_freq_max = 0;
> + freq_table[index].frequency != CPUFREQ_TABLE_END; index++)
> + if (freq_table[index].index == CPUFREQ_BOOST) {
> + if (freq_table[index].frequency > boost_freq_max)
> + boost_freq_max = freq_table[index].frequency;
> + }
> +
> + return boost_freq_max;
> +}
> +EXPORT_SYMBOL_GPL(cpufreq_frequency_table_boost_max);

why do we need this?

> /*
> * if you use these, you must assure that the frequency table is valid
> * all the time between get_attr and put_attr!
> diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
> index 037d36a..1294c8c 100644
> --- a/include/linux/cpufreq.h
> +++ b/include/linux/cpufreq.h
> @@ -88,6 +88,25 @@ struct cpufreq_real_policy {
> struct cpufreq_governor *governor; /* see below */
> };
>
> +#define CPUFREQ_BOOST_DIS (0)
> +#define CPUFREQ_BOOST_EN (1)

You don't need these.. Just create variable as bool and 0 & 1 would
be fine.

> +struct cpufreq_policy;
> +struct cpufreq_boost {
> + unsigned int max_boost_freq; /* maximum value of
> + * boosted freq */
> + unsigned int max_normal_freq; /* non boost max freq */
> + int status; /* status of boost */
> +
> + /* boost sysfs attributies */
> + struct freq_attr **attr;
> +
> + /* low-level trigger for boost */
> + int (*low_level_boost) (struct cpufreq_policy *policy, int state);
> +
> + struct list_head policies;
> +};

We don't need it. Just add two more fields to cpufreq_driver:
- have_boost_freqs and low_level_boost (maybe a better name.
What's its use?)

> struct cpufreq_policy {
> /* CPUs sharing clock, require sw coordination */
> cpumask_var_t cpus; /* Online CPUs only */
> @@ -113,6 +132,9 @@ struct cpufreq_policy {
>
> struct cpufreq_real_policy user_policy;
>
> + struct cpufreq_boost *boost;
> + struct list_head boost_list;

We don't need both of these.

> struct kobject kobj;
> struct completion kobj_unregister;
> };

> @@ -277,7 +302,6 @@ struct cpufreq_driver {
> int cpufreq_register_driver(struct cpufreq_driver *driver_data);
> int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
>
> -

??

> void cpufreq_notify_transition(struct cpufreq_policy *policy,
> struct cpufreq_freqs *freqs, unsigned int state);
>
> @@ -403,6 +427,9 @@ extern struct cpufreq_governor cpufreq_gov_conservative;
> #define CPUFREQ_ENTRY_INVALID ~0
> #define CPUFREQ_TABLE_END ~1
>
> +/* Define index for boost frequency */
> +#define CPUFREQ_BOOST ~2

s/CPUFREQ_BOOST/CPUFREQ_BOOST_FREQ


\
 
 \ /
  Last update: 2013-06-06 13:41    [W:1.158 / U:2.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site