lkml.org 
[lkml]   [2013]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/7] ARM:stixxxx: Add DEBUG_LL console support
Date
From: Srinivas Kandagatla <srinivas.kandagatla@st.com>

This patch adds low level debug uart support to stixxxx based SOCs.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
CC: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig.debug | 35 +++++++++++++++++++++
arch/arm/include/debug/stixxxx.S | 61 ++++++++++++++++++++++++++++++++++++++
2 files changed, 96 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/debug/stixxxx.S

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 1d41908..9e6d6c1 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -483,6 +483,16 @@ choice
This option selects UART0 on VIA/Wondermedia System-on-a-chip
devices, including VT8500, WM8505, WM8650 and WM8850.

+ config DEBUG_STIXXXX_UART
+ depends on ARCH_STIXXXX
+ bool "Use StiH415/416 ASC for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on StiH415/416 based platforms like B2000, B2020.
+ It support UART2 and SBC_UART1.
+
+ If unsure, say N.
+
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
depends on !ARCH_MULTIPLATFORM
@@ -617,6 +627,30 @@ choice

endchoice

+choice
+ prompt "Low-level debug console UART"
+ depends on DEBUG_LL && DEBUG_STIXXXX_UART
+
+ config STIH41X_DEBUG_ASC2
+ bool "ASC2 UART"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2000, which has
+ default UART wired up to ASC2.
+
+ If unsure, say N.
+
+ config STIH41X_DEBUG_SBC_ASC1
+ bool "SBC ASC1 UART"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2020. which has
+ default UART wired up to SBC ASC1.
+
+ If unsure, say N.
+
+endchoice
+
config DEBUG_LL_INCLUDE
string
default "debug/bcm2835.S" if DEBUG_BCM2835
@@ -641,6 +675,7 @@ config DEBUG_LL_INCLUDE
DEBUG_MMP_UART3
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+ default "debug/stixxxx.S" if DEBUG_STIXXXX_UART
default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
default "debug/tegra.S" if DEBUG_TEGRA_UART
default "debug/ux500.S" if DEBUG_UX500_UART
diff --git a/arch/arm/include/debug/stixxxx.S b/arch/arm/include/debug/stixxxx.S
new file mode 100644
index 0000000..7bc02a7
--- /dev/null
+++ b/arch/arm/include/debug/stixxxx.S
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/include/debug/stixxxx.S
+ *
+ * Debugging macro include header
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define STIH41X_COMMS_BASE 0xfed00000
+#define STIH41X_ASC2_BASE (STIH41X_COMMS_BASE+0x32000)
+
+#define STIH41X_SBC_LPM_BASE 0xfe400000
+#define STIH41X_SBC_COMMS_BASE (STIH41X_SBC_LPM_BASE + 0x100000)
+#define STIH41X_SBC_ASC1_BASE (STIH41X_SBC_COMMS_BASE + 0x31000)
+
+
+#define VIRT_ADDRESS(x) (x - 0x1000000)
+
+#if IS_ENABLED(CONFIG_STIH41X_DEBUG_ASC2)
+#define DEBUG_LL_UART_BASE STIH41X_ASC2_BASE
+#endif
+
+#if IS_ENABLED(CONFIG_STIH41X_DEBUG_SBC_ASC1)
+#define DEBUG_LL_UART_BASE STIH41X_SBC_ASC1_BASE
+#endif
+
+#ifndef DEBUG_LL_UART_BASE
+#error "DEBUG UART is not Configured"
+#endif
+
+#define ASC_TX_BUF_OFF 0x04
+#define ASC_CTRL_OFF 0x0c
+#define ASC_STA_OFF 0x14
+
+#define ASC_STA_TX_FULL (1<<9)
+#define ASC_STA_TX_EMPTY (1<<1)
+
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =DEBUG_LL_UART_BASE @ physical base
+ ldr \rv, =VIRT_ADDRESS(DEBUG_LL_UART_BASE) @ virt base
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #ASC_TX_BUF_OFF]
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #ASC_STA_OFF]
+ tst \rd, #ASC_STA_TX_FULL
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #ASC_STA_OFF]
+ tst \rd, #ASC_STA_TX_EMPTY
+ beq 1001b
+ .endm
--
1.7.6.5


\
 
 \ /
  Last update: 2013-06-21 13:21    [W:0.055 / U:1.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site