Messages in this thread | | | Date | Wed, 12 Jun 2013 14:47:44 +0900 | From | Simon Horman <> | Subject | Re: [PATCH v3 3/5] ARM: mach-shmobile: kota2: Use leds-pwm + pwm-rmob |
| |
On Wed, Jun 12, 2013 at 02:33:16PM +0900, Magnus Damm wrote: > Hi Laurent, > > [Added Simon to CC] > > Thanks for your work on converting the TPU driver. I found one issue, see below: > > On Tue, Jun 11, 2013 at 10:45 PM, Laurent Pinchart > <laurent.pinchart+renesas@ideasonboard.com> wrote: > > Instead of using the LED-specific TPU PWM driver, switch to the generic > > TPU PWM driver with leds-pwm. > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > > --- > > arch/arm/mach-shmobile/board-kota2.c | 183 ++++++++++++++++++++-------------- > > arch/arm/mach-shmobile/clock-sh73a0.c | 8 +- > > 2 files changed, 114 insertions(+), 77 deletions(-) > > > > [snip] > > > diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c > > index d9fd033..6c04348 100644 > > --- a/arch/arm/mach-shmobile/clock-sh73a0.c > > +++ b/arch/arm/mach-shmobile/clock-sh73a0.c > > @@ -669,10 +669,10 @@ static struct clk_lookup lookups[] = { > > CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */ > > CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ > > CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */ > > - CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */ > > - CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */ > > - CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */ > > - CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */ > > + CLKDEV_DEV_ID("rmob_tpu_pwm.1", &mstp_clks[MSTP303]), /* TPU1 */ > > + CLKDEV_DEV_ID("rmob_tpu_pwm.2", &mstp_clks[MSTP302]), /* TPU2 */ > > + CLKDEV_DEV_ID("rmob_tpu_pwm.3", &mstp_clks[MSTP301]), /* TPU3 */ > > + CLKDEV_DEV_ID("rmob_tpu_pwm.4", &mstp_clks[MSTP300]), /* TPU4 */ > > CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ > > CLKDEV_DEV_ID("e6826000.i2c", &mstp_clks[MSTP411]), /* I2C3 */ > > CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */ > > -- > > 1.8.1.5 > > > > I believe you are using the old "rmob" device name in the hunk above. > Apart from that it looks fine. > > I left my Kota2 board at Simon's place some time ago so I'm afraind > that I can't test. Given the complexity with multiple subsystems and > also recent name changes, perhaps testing this would make sense? > > Simon, can you please test this series on Kota2?
Sure.
Laurent could you re-post the series with the "rmob" problem resolved?
| |