lkml.org 
[lkml]   [2013]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: omap4-panda: Add USB Host support
* Roger Quadros <rogerq@ti.com> [130419 01:23]:
> On 04/18/2013 11:09 PM, Tony Lindgren wrote:
>
> > the naming should be mode0name.modename to be consistent. Here's
> > what I dumped out, please check and replace spaces with tabs:
> >
> > 0x82 0x10c /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk gpio84 INPUT_PULLDOWN | MODE4 */
> > 0x84 0x4 /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp gpio85 OUTPUT | MODE4 */
> > 0x86 0x104 /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir gpio86 INPUT | MODE4 */
> > 0x88 0x104 /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt gpio87 INPUT | MODE4 */
> > 0x8a 0x104 /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 gpio88 INPUT | MODE4 */
> > 0x8c 0x104 /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 gpio89 INPUT | MODE4 */
> > 0x8e 0x104 /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 gpio90 INPUT | MODE4 */
> > 0x90 0x104 /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 gpio91 INPUT | MODE4 */
> > 0x92 0x104 /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 gpio92 INPUT | MODE4 */
> > 0x94 0x104 /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 gpio93 INPUT | MODE4 */
> > 0x96 0x104 /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 gpio94 INPUT | MODE4 */
> > 0x98 0x104 /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 gpio95 INPUT | MODE4 */
>
> I don't think gpioXX is necessary as we aren't using any of them as GPIOs.

Oops sorry yeah please check as that's something I just dumped
from the system. The gpio numbering is just data for debugging
that you can leave out. Also check please check I dumped the right
pins, I just grepped for usbb1.

Regards,

Tony


\
 
 \ /
  Last update: 2013-04-19 18:01    [W:0.067 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site