lkml.org 
[lkml]   [2013]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] regulator: tps65910: Simplify setting enable_mask for regulators
On Sat, Dec 28, 2013 at 11:02:35AM +0800, Axel Lin wrote:
> BBCH_BBCHEN_MASK is equivalent to TPS65910_SUPPLY_STATE_ENABLED.
> So all regulators have the same enable_mask setting.
>

Thanks for spotting this. You could also remove BBCH_BBCHEN_* from
include/linux/mfd/tps65910.h.

Regards,

Markus

> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> ---
> drivers/regulator/tps65910-regulator.c | 16 +---------------
> 1 file changed, 1 insertion(+), 15 deletions(-)
>
> diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
> index 979ea0a..f50dd84 100644
> --- a/drivers/regulator/tps65910-regulator.c
> +++ b/drivers/regulator/tps65910-regulator.c
> @@ -1207,21 +1207,7 @@ static int tps65910_probe(struct platform_device *pdev)
> pmic->desc[i].type = REGULATOR_VOLTAGE;
> pmic->desc[i].owner = THIS_MODULE;
> pmic->desc[i].enable_reg = pmic->get_ctrl_reg(i);
> -
> - switch (i) {
> - case TPS65910_REG_VBB:
> - if (tps65910_chip_id(tps65910) == TPS65910)
> - pmic->desc[i].enable_mask = BBCH_BBCHEN_MASK;
> - else
> - pmic->desc[i].enable_mask =
> - TPS65910_SUPPLY_STATE_ENABLED;
> - break;
> -
> - default:
> - pmic->desc[i].enable_mask =
> - TPS65910_SUPPLY_STATE_ENABLED;
> - break;
> - }
> + pmic->desc[i].enable_mask = TPS65910_SUPPLY_STATE_ENABLED;
>
> config.dev = tps65910->dev;
> config.init_data = reg_data;
> --
> 1.8.1.2
>
>
>
>

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2013-12-28 18:41    [W:0.031 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site