lkml.org 
[lkml]   [2013]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] libata, freezer: avoid block device removal while system is frozen
Date
On Tuesday, December 17, 2013 07:50:42 AM Tejun Heo wrote:
> Hello,
>
> Rafael, if you're okay with the workaround, I'll route it through
> libata/for-3.13-fixes.
>
> Thanks.
> ------- 8< -------
> Freezable kthreads and workqueues are fundamentally problematic in
> that they effectively introduce a big kernel lock widely used in the
> kernel and have already been the culprit of several deadlock
> scenarios. This is the latest occurrence.
>
> During resume, libata rescans all the ports and revalidates all
> pre-existing devices. If it determines that a device has gone
> missing, the device is removed from the system which involves
> invalidating block device and flushing bdi while holding driver core
> layer locks. Unfortunately, this can race with the rest of device
> resume. Because freezable kthreads and workqueues are thawed after
> device resume is complete and block device removal depends on
> freezable workqueues and kthreads (e.g. bdi_wq, jbd2) to make
> progress, this can lead to deadlock - block device removal can't
> proceed because kthreads are frozen and kthreads can't be thawed
> because device resume is blocked behind block device removal.
>
> 839a8e8660b6 ("writeback: replace custom worker pool implementation
> with unbound workqueue") made this particular deadlock scenario more
> visible but the underlying problem has always been there - the
> original forker task and jbd2 are freezable too. In fact, this is
> highly likely just one of many possible deadlock scenarios given that
> freezer behaves as a big kernel lock and we don't have any debug
> mechanism around it.
>
> I believe the right thing to do is getting rid of freezable kthreads
> and workqueues. This is something fundamentally broken. For now,
> implement a funny workaround in libata - just avoid doing block device
> hot[un]plug while the system is frozen. Kernel engineering at its
> finest. :(
>
> v2: Add EXPORT_SYMBOL_GPL(pm_freezing) for cases where libata is built
> as a module.
>
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Reported-by: Tomaž Šolc <tomaz.solc@tablix.org>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=62801
> Link: http://lkml.kernel.org/r/20131213174932.GA27070@htj.dyndns.org
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Len Brown <len.brown@intel.com>
> Cc: Oleg Nesterov <oleg@redhat.com>
> Cc: stable@vger.kernel.org
> ---
> drivers/ata/libata-scsi.c | 19 +++++++++++++++++++
> kernel/freezer.c | 6 ++++++
> 2 files changed, 25 insertions(+)
>
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -3871,6 +3871,25 @@ void ata_scsi_hotplug(struct work_struct
> return;
> }
>
> + /*
> + * XXX - UGLY HACK
> + *
> + * The core suspend/resume path is fundamentally broken due to
> + * freezable kthreads and workqueue and may deadlock if a block
> + * device gets removed while resume is in progress. I don't know
> + * what the solution is short of removing freezable kthreads and
> + * workqueues altogether.

Do you mean the block device core or the SCSI core or something else? It would
be good to clarify that here to avoid confusion.

> + * The following is an ugly hack to avoid kicking off device
> + * removal while freezer is active. This is a joke but does avoid
> + * this particular deadlock scenario.
> + *
> + * https://bugzilla.kernel.org/show_bug.cgi?id=62801
> + * http://marc.info/?l=linux-kernel&m=138695698516487
> + */
> + while (pm_freezing)
> + msleep(100);

Why is the sleep time 100 ms exactly? And why does it matter?

For example, what would change if it were 10 ms?

> +
> DPRINTK("ENTER\n");
> mutex_lock(&ap->scsi_scan_mutex);
>
> --- a/kernel/freezer.c
> +++ b/kernel/freezer.c
> @@ -19,6 +19,12 @@ EXPORT_SYMBOL(system_freezing_cnt);
> bool pm_freezing;
> bool pm_nosig_freezing;
>
> +/*
> + * Temporary export for the deadlock workaround in ata_scsi_hotplug().
> + * Remove once the hack becomes unnecessary.
> + */
> +EXPORT_SYMBOL_GPL(pm_freezing);
> +
> /* protects freezing and frozen transitions */
> static DEFINE_SPINLOCK(freezer_lock);
>

Thanks,
Rafael

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-12-18 02:21    [W:0.077 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site