lkml.org 
[lkml]   [2013]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 3/3] ARM: tegra: correct Colibri T20 regulator settings
On 12/06/2013 05:51 AM, Stefan Agner wrote:
> Set the parent of the regulators LDO2 to LDO9 according to the
> schematic. Set the base voltage to 3.3V, there is only 3.3V on the
> module itself.
>
> Set the Core and CPU voltage to the specified voltages of 1.2V and
> 1.0V respectivly.
>
> LDO6 should deliver 2.85V. The attached peripherals were not in
> use so far.

I've applied patch 3/3 only to Tegra's for-3.14/dt branch.


\
 
 \ /
  Last update: 2013-12-12 21:21    [W:0.088 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site