lkml.org 
[lkml]   [2013]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] I2C: busses: i2c-eg20t Do not print error message in syslog if no ACK received
On Sun, Nov 17, 2013 at 06:46:20PM +0100, Andreas Werner wrote:
> Using the i2c-eg20t driver and call i2cdetect or probe on the bus,
> the driver will print a lot of error messages if there was no ACK
> received.
>
> i2cdetect normally print a table with all the available devices. If there
> is no device on the address, the table will be empty.
> Currently with the i2c-eg20t driver, the table is not visible because
> the error messages destroy the table.
>
> Error message: pch_i2c_getack return -71
>
> This patch prevent the driver to print the messages to syslog.
> The pch_i2c_wait_for_check_xfer function is the only one who is
> calling pch_i2c_getack, so we can delete the function and add the
> read to pch_i2c_wait_for_check_xfer.
> If no ACK is received, the Message will be printed as a dbg
> message.
>
> Fixed print message to be a one liner so we can grep for the
> error message.
>
> Tested on Intel Atom E6xx and Eg20t Chipset.
>
> Signed-off-by: Andreas Werner <wernerandy@gmx.de>

Applied to for-next, thanks!

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-11-17 20:01    [W:0.029 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site