lkml.org 
[lkml]   [2013]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Add dual-fifo mode support of i.MX ssi
Date
Changelog
v2:
* Instead of adding rogue scripts to current SDMA driver based on firmware
* V1, we define the new SDMA firmware as version 2 and bisect the PATCH-1
* to two patches: The first is to add version check code to the SDMA driver;
* And the second is to add SSI dual FIFO DMATYPE.
*
* Nothing changes for the last two patches.
v1:
* SSI can reduce hardware overrun/underrun possibility when using dual
* fifo mode. To support this mode, we need to first update sdma sciprt
* list, and then enable dual fifo BIT in SSI driver, and last update DT
* bindings of i.MX series.
*
* ! This series of patches has a direct dependency between them. When
* ! applying them, we need to apply in one single branch. Otherwise,
* ! it would break currect branches.

Nicolin Chen (4):
dma: imx-sdma: Add sdma firmware version 2 support
dma: imx-sdma: Add new dma type for ssi dual fifo script
ASoC: fsl_ssi: Add dual fifo mode support
ARM: dts: imx: use dual-fifo sdma script for ssi

.../devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
arch/arm/boot/dts/imx51.dtsi | 4 ++--
arch/arm/boot/dts/imx53.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl.dtsi | 12 +++++------
arch/arm/boot/dts/imx6sl.dtsi | 12 +++++------
drivers/dma/imx-sdma.c | 19 ++++++++++++++++-
include/linux/platform_data/dma-imx-sdma.h | 3 +++
include/linux/platform_data/dma-imx.h | 1 +
sound/soc/fsl/fsl_ssi.c | 24 +++++++++++++++++++++-
9 files changed, 62 insertions(+), 18 deletions(-)

--
1.8.4




\
 
 \ /
  Last update: 2013-10-31 07:41    [W:0.136 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site