lkml.org 
[lkml]   [2013]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 05/10] ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset
Hi Benoit,

Could you please take the device tree related patches [5 to 10] in this series?
Thanks.

cheers,
-roger

On 09/24/2013 11:53 AM, Roger Quadros wrote:
> We no longer need to model the RESET line as a regulator since
> the USB phy-nop driver accepts "reset-gpios" property.
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> arch/arm/boot/dts/omap3-beagle.dts | 13 +------------
> 1 files changed, 1 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index dfd8310..71bde47 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -44,17 +44,6 @@
> };
> };
>
> - /* HS USB Port 2 RESET */
> - hsusb2_reset: hsusb2_reset_reg {
> - compatible = "regulator-fixed";
> - regulator-name = "hsusb2_reset";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpio = <&gpio5 19 0>; /* gpio_147 */
> - startup-delay-us = <70000>;
> - enable-active-high;
> - };
> -
> /* HS USB Port 2 Power */
> hsusb2_power: hsusb2_power_reg {
> compatible = "regulator-fixed";
> @@ -68,7 +57,7 @@
> /* HS USB Host PHY on PORT 2 */
> hsusb2_phy: hsusb2_phy {
> compatible = "usb-nop-xceiv";
> - reset-supply = <&hsusb2_reset>;
> + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
> vcc-supply = <&hsusb2_power>;
> };
>
>



\
 
 \ /
  Last update: 2013-10-03 13:01    [W:0.291 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site