lkml.org 
[lkml]   [2013]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/4] charger-manager: Add device tree binding for charger-manager
Hi Grant,

On 10/26/2013 05:03 AM, Grant Likely wrote:
> On Tue, 22 Oct 2013 21:51:56 +0900, Chanwoo Choi <cw00.choi@samsung.com> wrote:
>> This patch add binding file for charger-manager that this framework enables to
>> control and multiple chargers and to monitor charging event.
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
>> ---
>> .../devicetree/bindings/power/charger-manager.txt | 106 +++++++++++++++++++++
>> 1 file changed, 106 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/power/charger-manager.txt
>>
>> diff --git a/Documentation/devicetree/bindings/power/charger-manager.txt b/Documentation/devicetree/bindings/power/charger-manager.txt
>> new file mode 100644
>> index 0000000..b22c5526
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power/charger-manager.txt
>> @@ -0,0 +1,106 @@
>> +Charger-manager framework
>> +
>> +THe devicetree bindings are for the charger-manager to control charging feature.
>> +
>> +This framework enables to control and multiple chargers and to monitor charging
>> +event in the context of suspend-to-RAM with an interface combining the chargers.
>> +
>> +Required Properties:
>> +- compatible: Must be "charger-manager".
>> +- psy-name: The name of power-supply class for charger-manager.
>> +- polling-mode: Determine which polling mode will be used.
>> +- polling-invertal-ms: Interval in millisecond at which charger-manager will
>> + monitor battery health.
>> +- fullbatt-vchkdrop-ms
>> +- fullbatt-vchkdrop-uV: Check voltage drop afer the battery is fully charged.
>> + If it has dropped more than fullbatt_vchkdrop_uV after
>> + fullbatt_vchkdrop_ms, charger-manager will restart
>> + charging.
>> +- fullbatt-uV: The standard voltage in microvolt for checking
>> + fully charged. If VBATT >= fullbatt_uV, it is assumed to
>> + be full.
>> +- fullbatt-soc: The standard SOC(State Of Charger) for checking
>> + fully charged. If state of Charge >= fullbatt_soc, it is
>> + assumed to be full.
>> +- fullbatt-full-capacity: The standard capacity for checking fully charged.
>> + If full capacity of battery >= fullbatt_full_capacity,
>> + it is assumed to be full.
>> +- battery-present: Specify where information for existance of battery
>> + can be obtained.
>> +- measure-battery-temp: Whether to measure battery or not
>> +
>> +- charging-max-duration-minute: Maximum possible duration for charging.
>> + If whole charging duration exceed 'charging-max-duration
>> + -ms', charger-manager stop charging.
>> +- discharging-max-duration-minute: Maximum possible duration for
>> + discharging with charger cable after full-batt. If
>> + discharging duration exceed 'discharging-max-duration-
>> + ms', charger-manager start charging.
>> +- psy-fuelgauge-name: The name of power-supply for fuel gauge
>> +- io-channels: The iio channel data for ADC
>> +- iio-adc-overheat: The value of the highest ADC for temperature
>> +- iio-adc-cold: The value of the lowest ADC for temperature
>> +- psy-chargers: Arrary of power-supply name for chargers.
>> +- charger-regulators: Array of charger regulators. It include charger cable
>> + data which need cable-name/extcon-name/min-current-uA
>> + max-current-uA. When cable is attached/detached,
>> + charger-manager change current limit of regulator
>> + according to min-current-uA/max-current-uA.
>
> The documentation for the above properties needs to specify what the
> values actually mean. For example, "polling-mode" is documented as
> "Determine which polling mode will be used". Huh? What is the difference
> between a value of 0 or 1? What values are valid? What do they mean?
>
> As it stands I suspect that the binding is a direct translation from the
> existing pdata structure. That probably isn't really what you want. Some
> of the properties above do make sense and are documented correctly (ie.
> fullbatt-*), but others don't make sense and probably shouldn't be part
> of the generic binding (ie. io-channels sounds like something device
> specific).
>
> I'll defer to the regulators people on what does and does not make
> sense.
>

OK, I add detailed and easy description for improving the understanding
in accordance with your comment and will resend this patchset.

Thanks.

Best Regards,
Chanwoo Choi


\
 
 \ /
  Last update: 2013-10-26 05:21    [W:0.101 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site