lkml.org 
[lkml]   [2013]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch V5] drivers: power: Add support for bq24735 charger
On Fri, Oct 25, 2013 at 03:48:41PM -0700, Anton Vorontsov wrote:
> On Mon, Oct 14, 2013 at 12:40:26PM -0600, Stephen Warren wrote:
> > >>> diff --git a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
> > >>
> > >>> +Optional properties :
> > >>
> > >>> + - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
> > >>> + presence.
> > >>
> > >> Is that actually a property of the BQ24735 chip itself (i.e. is it an
> > >> output signal from the chip), or part of the board/system?
> > >
> > > The gpio itself is actually what the IRQ line is tied to from the
> > > bq24735 -> tegra (in this case). In other words this is a Host GPIO that
> > > is configured as an input and connected to the bq24735.
> >
> > Ok, so this is the ACOK output pin? In that case, it's fine. It might be
> > worth mentioning that explicitly though.
>
> I added the comment to the documentation and applied the patch with a
> "Thanks-to: Stephen Warren <swarren@wwwdotorg.org>" tag. :)

Oh, and as well as

Thanks-to: Thierry Reding <thierry.reding@gmail.com>

(People seem to review drivers, but do not give their Reviewed-by tags, so
the thanks tag is the best thing I can legally do in such a case.)

Thanks,

Anton


\
 
 \ /
  Last update: 2013-10-26 01:41    [W:0.846 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site