Messages in this thread | | | Date | Wed, 16 Oct 2013 10:23:10 +0100 | From | Lee Jones <> | Subject | Re: [PATCH 2/5] mfd: tc3589x: detect the precise version |
| |
On Tue, 15 Oct 2013, Linus Walleij wrote:
> Instead of detecting the "tc3589x" and hard-coding the number of > GPIO pins to 24, encode all the possible subtypes and set the > number of GPIO pins from the type. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > drivers/mfd/tc3589x.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 47 insertions(+), 2 deletions(-) > > diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c > index 70f4909f..0eabbb0 100644 > --- a/drivers/mfd/tc3589x.c > +++ b/drivers/mfd/tc3589x.c > @@ -16,6 +16,19 @@ > #include <linux/mfd/core.h> > #include <linux/mfd/tc3589x.h> > > +/** > + * enum tc3589x_version - indicates the TC3589x version > + */ > +enum tc3589x_version { > + TC3589X_TC35890, > + TC3589X_TC35892, > + TC3589X_TC35893, > + TC3589X_TC35894, > + TC3589X_TC35895, > + TC3589X_TC35896, > + TC3589X_UNKNOWN, > +}; > + > #define TC3589x_CLKMODE_MODCTL_SLEEP 0x0 > #define TC3589x_CLKMODE_MODCTL_OPERATION (1 << 0) > > @@ -361,7 +374,33 @@ static int tc3589x_probe(struct i2c_client *i2c, > tc3589x->i2c = i2c; > tc3589x->pdata = pdata; > tc3589x->irq_base = pdata->irq_base; > - tc3589x->num_gpio = id->driver_data; > + > + switch (id->driver_data) { > + case TC3589X_TC35890: > + tc3589x->num_gpio = 24; > + break; > + case TC3589X_TC35892: > + tc3589x->num_gpio = 24; > + break; > + case TC3589X_TC35893: > + tc3589x->num_gpio = 20; > + break; > + case TC3589X_TC35894: > + tc3589x->num_gpio = 24; > + break; > + case TC3589X_TC35895: > + tc3589x->num_gpio = 20; > + break; > + case TC3589X_TC35896: > + tc3589x->num_gpio = 20; > + break; > + case TC3589X_UNKNOWN: > + tc3589x->num_gpio = 24; > + break; > + default: > + tc3589x->num_gpio = 24; > + break; > + } > > i2c_set_clientdata(i2c, tc3589x); > > @@ -432,7 +471,13 @@ static int tc3589x_resume(struct device *dev) > static SIMPLE_DEV_PM_OPS(tc3589x_dev_pm_ops, tc3589x_suspend, tc3589x_resume); > > static const struct i2c_device_id tc3589x_id[] = { > - { "tc3589x", 24 }, > + { "tc35890", TC3589X_TC35890 }, > + { "tc35892", TC3589X_TC35892 }, > + { "tc35893", TC3589X_TC35893 }, > + { "tc35894", TC3589X_TC35894 }, > + { "tc35895", TC3589X_TC35895 }, > + { "tc35896", TC3589X_TC35896 }, > + { "tc3589x", TC3589X_UNKNOWN }, > { } > }; > MODULE_DEVICE_TABLE(i2c, tc3589x_id);
This is an awful lot of code for what we're trying to achieve. I propose two alternitives:
1. I guess that other OSes will need to capture the same information, so wouldn't it be prudant to do so via a DT property? That way it's just a one or two liner.
Or:
2. As we're only using .driver_data for num_gpio at this time, just place them in tc3589x_id as you have done for tc3589x.
Or, my least favourate alternitive, but still an improvment with regards to saving code:
3. Again, as all of this extra code is only used for pulling out num_gpio, group the devices by num_gpio:
> + switch (id->driver_data) { > + case TC3589X_TC35893: > + case TC3589X_TC35895: > + case TC3589X_TC35896: > + tc3589x->num_gpio = 20; > + break; > + case TC3589X_TC35890: > + case TC3589X_TC35892: > + case TC3589X_TC35894: > + case TC3589X_UNKNOWN: > + default: > + tc3589x->num_gpio = 24; > + break; > + }
My personal preference is 1 and 2 in equal measure.
-- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |